• International Journal of Highway Engineering
• /
• v.7 no.3 s.25
• /
• pp.31-42
• /
• 2005

This study evaluates the physical mechanical properties, durability and sound absorbtion of porous concrete for pavement according to content of silica fume and steel fiber to elicit the presentation of data and the way to enhance its function for the practical field application of porous concrete as a material of pavement. The results of the test indicate that in every condition, the void ratio and the coefficient of water permeability of porous concrete for pavement satisfy both the domestic standards and proposition values. Among the properties of strength, the compressive strength satisfies the standards in the specification of Korea National Housing Corporation as for every factor of mixture but in the case of the flexural strength, more than 0.6vol.% of steel fiber satisfied the Japan Concrete Institute proposition values. The mixture of silica fume and steel fiber presents the excellent intensity, though. The case when silica fume and steel fiber are used simultaneously presents the strongest durability because the durability shows the similar tendency to the dynamic characteristics. The case when 10wt.% of silica fume and 0.6vol.% of steel fiber are used at the same time shows that the loss rate of mass by Cantabro test became 27% better and freeze-thaw resistance became 60% better. As for the characteristics of sound absorption of porous concrete for pavement, Noise Reduction Coefficient is 0.48 to prove that it possesses almost 50% sound absorption.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2391-2400
• /
• 2015

Weather proof steels are used for steel bridges due to its high corrosion resistance under atmospheric conditions. However, instead of forming stabilized rust layers, general rust occurs on weather proof steels under high humidity condition close to seawater or shady places. In Japan, therefore, they perform rust stabilization treatment instead of unpainted treatment due to severe atmospheric conditions. However, most of domestic weather proof steels were constructed unpainted in the form of closed box-girder, which makes the periodical repetition of dry and wet hard to occur. For the steel bridges constructed on the Han river, the evaporation of water, dew condensation due to temperature change, and stagnant water due to rain affect harmfully on the formation of passive film on weather proof steels. Thus, in this research, in order to analyze corrosion properties inside the closed box-girder for the unpainted weather proof steel bridge in the waterworks safety zone, multiple ways of analysis such as observation with eyes, cellophane-tape test, steel thickness measurement, surface corrosion potential measurement, electron microscope analysis, and X-ray diffraction analysis of the rust were performed. As a result, unstable rust layer was observed inside the closed box-girder, and severe corrosion was observed on the top and bottom of the flanges due to the effects of stagnant water caused by rain, dew condensation, and de-icing materials.

• Journal of Engineering Education Research
• /
• v.22 no.6
• /
• pp.51-63
• /
• 2019

This study aims to present concept of "gong" which was shared by traditional East Asian societies (Korea, China and Japan) and to identify how it has been developed through their respective process of modernization and industrialization. Despite the territorial proximity of the three countries, their industrial and technological development followed different patterns, and the notion of engineering from the Occident was also accepted and reconstructed with a certain difference in each country. Japan had developed its own concept of engineering as part of industrialization in Western style and in the context of establishment of an imperialist nation. What was important for Japan was how engineering could contribute to the national development of technology and industry, and to the development of Imperial Japan. For China, which attached importance to resistance to Western civilizations and to strengthening the competitiveness for and which needed to resolve domestic political conflicts, engineering constituted more than a simple issue on technological and industrial dimension; it was also associated with obtaining ethical and political legitimacy which would allow the nation to gain support from the working and peasant classes. Though belated, Korean attempted to build an independent modern state, yet experienced a considerable nuisance from the invasion of Japan and the protracted colonial period. Engineering of Korea had to take a long time before emerging from backwardness especially because of Japanese policies which tended to restrict technological development and avoid fostering qualified engineers in the colony. Therefore, engineering in Korea started to contribute to the nation's development and the improvement of technological competitiveness only after it was combined with modern higher education after liberation, under the name of engineering science (工學, gong-hak). This study argues that our recognition of what engineering was for and who engineers were in East Asia will allow us to evaluate current status of engineering education and provide us with significant insight which will be useful when we imagine the future society. Identity of engineering in Korea, China, and Japan has been developed along with historical contexts such as clash of civilizations, wars, recovery of sovereignty and obtaining of national competitiveness; now, what will be combined with engineering in the next generation? This question will lead and motivate engineering students to think and imagine about what future engineering should be and how they respond to it.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.3
• /
• pp.63-72
• /
• 2015

This paper describes the correlation and relationship between elastic moduli measured by three stiffness measurement methods with different mechanical characteristics to evaluate the compaction characteristics of subgrade soils. The Soil Stiffness Gauge (SSG) with very small strain (${\approx}0.001%$) ranges, static Plate Loading Test (PLT) with mid-level strain (${\approx}0.01{\sim}0.1%$) ranges, and Dynamic Cone Penetrometer (DCP) using penetration resistance were implemented to measure the elastic modulus. To use the elastic modulus measured by different measurement methods with a wide range of strain in practice, it is required to identify the correlation and relationship of measured values in advance. The comparison results of the measured elastic moduli ($E_{SSG}$, $E_{PLT}$, $E_{DCP}$) using the three measurement methods for domestic and overseas subgrade soils under various conditions indicate that the evaluated elastic modulus relies on the types of soils and the level of stress condition. The correlation analysis of the measured elastic moduli except the data of cement treated soils indicates that the static elastic modulus ($E_{PLT}$) is evaluated as about 60 to 80% of the dynamic elastic modulus ($E_{SSG}$). Unusual soils such as cement treated soils are required to be corrected by the stress correction during the correlation analysis with typical soils, because these types of soils are sensitive to the stress condition when measuring the static elastic modulus ($E_{PLT}$) of soils. In addition, when considering the use of DCP data for the evaluation of the elastic modulus ($E_{DCP}$), the measured data of the elastic modulus less than 200 MPa show more reliable correlation.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.35 no.3
• /
• pp.164-169
• /
• 2009

Objectives : Administration methods of antibiotics implements a variety for indications and diseases. Therefore, it is impossible to produce a single guideline. Many antibiotics have been prescribed without specific index, by practicians for a long period of time. In general dental practice and oral and maxillofacial surgical practice, there is not a guidelines for antibiotics. Therefore, there is a dependency on pre-existent methods rather than following an exact guideline. Consequently, a controversy was issued that prescription of antibiotics tend to be misused or abused. And it is also direct relation to the tolerance of antibiotics as well. Moving forward, in this review we will be analyzing the exact usage and indication of antibiotics in dental treatment. Materials and Methods : 29 published articles of both domestic and international were researched through Pubmed and Kormed, and the review from these articles were performed accordingly. We examined the administration of antibiotics through the objective usage, that classified prophylactic and therapeutic. Results : For therapeutic usage, empirical prescription is mandatory for the first step. Next is to moderate the empirical prescription depending upon the result of its culture. Administration of antibiotics must be kept for 2days after the symptoms disappear. For a prophylactic use, we can generally pr escribe antibiotics to prevent local infection or systemic infection. Although the method of prescription and neccessity of antibiotics to prevent local in fection are controversial, exact guidelines of antibiotics to prevent systemic infection are established by AHA. Conclusion : Most crucial concept for prescript antibiotics is to determine if it is adequately suitable for all circumstances. In this decision making, a guideline for prescription of antibiotics in various dental surgical practice is necessary. This guideline can reduce the misusage and disusage of a ntibiotics in general dental practices and oral and maxillofacial surgical practices.

• Food Science and Preservation
• /
• v.24 no.7
• /
• pp.1043-1051
• /
• 2017

Wild yeasts were isolated from domestic non-sterilized Makgeolli and their fermentation characteristics were analyzed to select the best fermentation seed culture. A total of 65 yeast strains isolated yeasts from non-sterilized Makgeolli and Nuruk. In order to select fermentable strains, hydrogen sulfide, $CO_2$ production ability, alcohol tolerance and aroma component production ability were analyzed. To screen the aromatic strains of isolates, media containing cerulenin, 5,5,5-trifluor-DL-leucine (TFL) and API ZYM kit were used. There were 36 strains resistance to cerulenin and all strains produced esterase and demonstrated tolerance against TFL. Hydrogen sulfide, which could degrade the quality of the fermented beverage, was not produced in 34 yeast. The correlation between alcohol tolerance of yeast and carbon dioxide production was analyzed by principal component analysis. YM22, YM31, YM32 and YM37 produced a total of 0.14-0.18 g/72 h of $CO_2$ indicating high fermentability. Alcohol tolerance was measured by alcohol concentration. YM32, YM37 yeast had 20% alcohol tolerance. As a result, alcohol and flavor characteristics of wild yeast isolated from non-sterilized Makgeolli were analyzed and it was confirmed that yeast was suitable for the production of alcohol.

• Korean Journal of Poultry Science
• /
• v.40 no.3
• /
• pp.223-234
• /
• 2013

Poultry industry is abounding day by day as it engrosses less cost of investment per bird as compared to large animals. Poultry have the most copious genomic tool box amongst domestic animals for the detection of quantitative trait loci (QTL) and marker assisted selection (MAS). Use of multiple markers and least square techniques for mapping of QTL affecting quality and production traits in poultry is in vogue. Examples of genetic tests that are available to or used in industry programs are documented and classified into causative mutations (direct markers), linked markers in population-wide linkage disequilibrium (LD) with the QTL (LD markers), and linked markers in population wide equilibrium with the QTL (LE markers). Development of genome-wide SNP assays, role of 42 K, 60 K (Illumina) and 600 K (Affymetrix$^{(R)}$ Axim$^{(R)}$) SNP chip with next generation sequencing for identification of single nucleotide polymorphism (SNP) has been documented. Hybridization based, PCR based, DNA chip and sequencing based are the major segments of DNA markers which help in conducting of MAS in poultry. Economic index-marker assisted selection (EI-MAS) provides platform for simultaneous selection for production traits while giving due weightage to their marginal economic values by calculating predicted breeding value, using information on DNA markers which are normally associated with relevant QTL. Understanding of linkage equilibrium, linkage dis-equilibrium, relation between the markers and gene of interest are quite important for success of MAS. This kind of selection is the most useful tool in enhancing disease resistance by identifying candidate genes to improve the immune response. The application of marker assisted selection in selection procedures would help in improvement of economic traits in poultry.

• Environmental and Resource Economics Review
• /
• v.26 no.4
• /
• pp.577-612
• /
• 2017

In response to climate change, Korea is attempting to shift the paradigm of energy and climate change policies by introducing carbon pricing based on market mechanisms. While policy adoption is proceeding at a rapid pace, the introduction of carbon pricing has been faced with great opposition from industry. This study measures to what extent Korean companies understand and accept carbon pricing, using data from a questionnaire survey covering energy consuming companies in 2012, when discussions between the government and such companies about the introduction of a domestic emission trading system were active. It further identifies how preparations and practices for carbon and energy management of companies correlate with their policy understanding and acceptance. The analysis results show that the surveyed companies indicate moderate understanding of, as well as resistance to carbon pricing policies, while appreciating the economic incentives and accepting the mandatory regulations in this phase. Companies' understanding is more related to characteristics, i.e., sector, size, etc. than external pressures. This study found that the extent to which companies understand policy is the essential factor in their policy acceptance and related practices. In particular, understanding of carbon policy significantly influences their managerial practices and voluntary activities for carbon and energy practices. This study substantiates the correlation between the level of policy understanding of a company and its carbon and energy practices - something that all countries seeking to introduce carbon pricing in response to climate change should consider prior to policy actually being implemented; in other words, enhancing the understanding of major policy subjects of the new instrument is a key policy strategy that should be elaborated as it will lead to better performance of companies and smoother policy implementation.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.5
• /
• pp.519-524
• /
• 2005

Due to the low C/N ratio of domestic wastewater characteristic, addition of external carbon source for the effective N and P removal is necessary. High organic content of food waste can be used for the external carbon source in biological nutrient removal processes, The applicability of condensate of food waste (CFW), which is produced during the high-rate fermentation process, was examined in membrane bioreactor for the nutrient removal. Under the various operating conditions, nutrient removal efficiencies and membrane fouling characteristics were evaluated using synthetic wastewater. From nitrate utilization rate (NUR) test, denitrification rate was 0.19 g $NO_3-N/g$ VSS/day. With the addition of CFW increased, average removal efficiencies of T-N and T-P could be increased up to 64% and 41%, respectively. Also the optimal retention time was 3 hr/5 hr for anoxic/aerobic reactor. When applied to real sewage, membrane fouling resistance was increased up to 60%, which could be reduced from $10.4{\times}10^{12}m^{-1}$ to $5.9{\times}10^{12}m^{-1}$ with the control of influent suspended solid concentration. In summary, it was suggested that CFW could be used as an economical and effective carbon source for membrane assisted biological N and P removal.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.5
• /
• pp.449-457
• /
• 2020

Due to the improvement of living standards and avoidance of the 3D industry, it is difficult to find young and competent domestic workers at construction sites, and most foreign workers are contributing to the replacement, but the quality is still deteriorating due to lack of skilled workers and aging. Precast method is a method that make members in factory and assembles them on site, which can be expected to improve labor force and quality. This study is intended to provide basic data for the development of hang-type PC beams that can be applied to the determination of the field application of developed PC beams. The U-type connecting material is installed on both ends of the hang-up PC beam, and the role of the U-type connecting material is very important because it is a simple construction method through the U-type connecting material. In addition, the performance of the U-type connecting material will determine the performance of the hang-type PC beam as the final destruction occurs in the hang-type PC beam. The material properties of U-type connecting material were identified through structural experiments, and the end test corresponding to the partial experiment was conducted based on the material test results identified. Finally, the final design value of PC beams was proposed through structural experiments for application to the site.