• Structural Engineering and Mechanics
• /
• v.49 no.4
• /
• pp.427-448
• /
• 2014

At present, the time of easy oil and gas is over. Now, the largest part of fossil fuels is concentrated in the deepest levels of tectonic structures and in the sea shelves. One of the most cumbersome operations of their extraction is the bore-hole drilling. In connection with austere tectonic and climate conditions, their drivage every so often is associated with great and diversified technological difficulties causing emergencies on frequent occasions. As a rule, they are linked with drill string accidents. A key role in prediction of these situations should play methods of theoretical modelling. For this reason, there is a growing need for development and implementation of new numerical methods for computer simulation of critical and post-critical behavior of drill strings (DSs). In this paper, the processes of non-linear deforming of a DS in cylindrical cavity of a deep bore-hole are considered. On the basis of the theory of curvilinear flexible rods, non-linear constitutive differential equations are deduced. The effects of the longitudinal non-uniform preloading, action of torque and interaction between the DS and the bore-hole surface are taken into account. Owing to the use of curvilinear coordinates in the constraining cylindrical surface and a specially chosen concomitant reference frame, it became possible to separate the desired variables and to reduce the total order of the equation system. To solve it, the method of continuation the solution by parameter and the transfer matrix technique are applied. As a result of the completed numerical analysis, the critical states of the DS loading in the cylindrical channels of inclined bore-holes are found. It is shown that the modes of the post-critical deforming of the DS are associated with its irregular spiral curving prevailing in the zone of bottom-hole-assembly. The possibility of invariant state generation during post-critical deforming is established, condition of its bifurcation is formulated. It is shown that infinite variety of loads can correspond to one geometrical configuration of the DS. They differ each from other by contact force functions.

• Journal of Korea Multimedia Society
• /
• v.12 no.1
• /
• pp.58-68
• /
• 2009

With the rapid development of computer hardware and invention of various game-related technologies, the quality of games has been greatly improved and the genres of games have been diversified. Yet, in comparison, puzzle games have held to the past simple way of games, which has only led to a depression of the puzzle game market. This paper is the first attempt to overcome limits of the current puzzle games, by finding a breakthrough in three-dimensional puzzle games. In order to describe a realistic puzzle assembly in a three-dimensional puzzle game, this paper aimed to design a structure assembly technique made up of three steps that used a proper process to handle structure suitable to assembly, an elaborate way of collisions between individual objects and a physical structure. Through this technique, we intend to show in a simple experiment that it is possible to minimize the calculation cost in the assembly process and at the same time to achieve an elaborate puzzle assembly between structures.

• Cartoon and Animation Studies
• /
• s.31
• /
• pp.29-55
• /
• 2013

In the contemporary modern society, information and knowledge generate a set of new social values. These changes demand a transformation not only in socio-cultural and educational spheres, but also, specifically, in the field of culture and art education. Culture and Art education emphasizes the integration and cross-discipline of other related fields which have great impact on culture and arts. This study applies theoretical analysis of Animation education in the context of culture and art education. Animation education takes an interdisciplinary approach to integrate various subjects in the field of culture and art education. Animation, as a form of culture and art education, plays an educational role in the social classroom. Animation education should be developed and expanded to become a regular classroom course. The goal of Animation education is to pursue and develop a connection with other educational courses of study. In order to strengthen the role of Animation education, we should first re-structure the pedagogical role of Animation education. Secondly, Animation education needs to become a diversified and popularized education. Third, the cultivation of creative human resources is considered of vital importance to Animation education. Finally, the expansion of infrastructure and the establishment of a comprehensive support system for Animation education has to be established.

• Journal of environmental and Sanitary engineering
• /
• v.8 no.2
• /
• pp.25-48
• /
• 1993

International concern over the environmental pollution is ever increasing, and diversified countermeasures must be devised in Korea also. Global trend, damages, problems and countermeasures with respect to issues mentioned in the Rio Declaration, such as prevention of ozone layer destruction, reduction of migratory atmospheric pollution between neighboring countries, and prevention of global greenhouse effect, were discussed in this report. Conclusion of the report is summarized as follows : A. Measurement, Planning and Monitoring (1) Development and implementation of a global network for measurement and monitoring from the global aspects such factors as related to acid rain(Pioneer substances, pH, sulfate, nitrate), effect of global temperature(Air temperature, $CO_2$, $CH_4$, CFC, $N_2O$) and destruction of ozone layer($CFC_S$). (2) Establishment of network system via satellite monitoring movement of regional air mass, damage on the ozone layer and ground temperature distribution. B. Elucidation of Present State (1) Improvement and development of devices for carbon circulation capable of accurately forecasting input and output of carbon. (2) Developmental research on chemical reactions of greenhouse gas in the air. (3) Improvement and development of global circulation model(GCM) C. Impact Assessment Impact assessment on ecosystem, human body, agriculture, floodgate, land use, coastal ecology, industries, etc. D. Preventive Measures and Technology Development (1) Development and consumption of new energy (2) Development of new technology for removal of pioneer substances (3) Development of substitute matter for $CFC_S$ (4) Improvement of agriculture and forestry means to prevent the destruction of ozone layer and the greenhouse effect of the globe (5) Improvement of housing to prevent the destruction of ozone layer and the greenhouse effect of the globe (6) Development of new technology for probing underground water (7) Preservation of forest (8) Biomass 5. Policy Development (1) Development of strategy model (2) Development of long term forecast model (3) Development of penalty charge effect and expense evaluation methods (4) Feasibility study on regulations By establishing the above mentioned measures for environmentally sound and sustainable development to establish the right to live for humankind and to preserve the one and only earth.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.1
• /
• pp.114-123
• /
• 2017

The global small and mid-sized display market is changing from thin film transistor-liquid crystal display to organic light emitting diode (OLED). Reflecting these market conditions, the domestic and overseas display panel industry is making great effort to innovate OLED technology and incease productivity. However, current OLED production technology has not been able to satisfy the quality requirement levels by customers, as the market demand for OLED is becoming more and more diversified. In addition, as OLED panel production technology levels to satisfy customers' requirement become higher, product quality problems are persistently generated in OLED deposition process. These problems not only decrease the production yield but also cause a second problem of deteriorating productivity. Based on these observations, in this study, we suggest TRIZ-based improvement of defects caused by glass pixel position deformation, which is one of quality deterioration problems in small and medium OLED deposition process. Specifically, we derive various factors affecting the glass pixel position shift by using cause and effect diagram and identify radical reasons by using XY-matrix. As a result, it is confirmed that glass heat distortion due to the high temperature of the OLED deposition process is the most influential factor in the glass pixel position shift. In order to solve the identified factors, we analyzed the cause and mechanism of glass thermal deformation. We suggest an efficient method to minimize glass thermal deformation by applying the improvement plan of facilities using contradiction matrix in TRIZ. We show that the suggested method can decrease the glass temperature change by about 23% through an experiment.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.1
• /
• pp.99-109
• /
• 2016

The types and characteristics of services that airport service systems provide have recently been diversified and specialized to meet various needs of users and their travelling activities. A service for the mobility handicapped is one of the newly demanded services. However, current services for them, which are provided by most of the Korean airports, are not sufficient to satisfy their needs. Additionally, there exist a lot of constraints in the use of those services, which makes it difficult for the mobility handicapped to use them effectively. Another problem is that a lot of the mobility handicapped do not even know that airports now offer services specialized for them. Considering that Korean airports have been recognized as a top-level service provider for about decades, it can be claimed that such an inferior quality of services for the mobility handicapped should be urgently improved. With this issue in mind, this study aims to propose an approach to improving the quality of airport services for the mobility handicapped. Firstly, we examined the actual conditions of the services for the mobility handicapped and identified the limitations of the current services, based on the results of literature review and questionnaire survey against the mobility handicapped and stakeholders of the services currently provided. Then we established a set of design improvement requirements and suggested several ways to improve the services for the mobility handicapped. Finally, we pointed out several issues to be resolved to design better specialized services for the mobility handicapped.

• Journal of the military operations research society of Korea
• /
• v.32 no.2
• /
• pp.78-91
• /
• 2006

Recently mass customization has become a new paradigm in the global market to satisfy both the diversified demands of customers but also the efficiency of the mass production system. In this paper, mass customization is embodied by a new product development method with which various product families are produced from standard "product platform" developed from historical data. The product platform, the key concept of this proposed method, is significantly efficient as a solution to the customer demand of high variety and small quantity products. The proposed method is applied to build the platform family of naval ships, utilizing the concept of "Group Technology". In addition, cost effectiveness of the proposed method is analyzed and the applicable range of requirement conditions are presented. In conclusion, some remarkable effects such as reduction in production cost and development time are expected by employing this method to the procurement process of the naval ships.

• Journal of Digital Contents Society
• /
• v.19 no.3
• /
• pp.479-487
• /
• 2018

Recently, with the advent of the 4th Industrial Revolution, the diversified industrial base and stable employment market have led to increased concern on the metropolis centered manufacturing. However, To enhance the added value and competitiveness of the manufacturing industry in Seoul, it is necessary to develop specialized smart-based technology and production, and to establish a collaborative system among various businesses in the areas of planning, production, and logistics. Accordingly, I planned a service that is necessary for activation of the urban manufacturing industry in Dongdaemun area of Seoul to enable designers to construct an infrastructure for direct production. The proposed content is a hands-on application that provides information to producers who want to make their own unique products with which they can buy materials from Dongdaemun, Cheonggyecheon, and Uljiro areas.

• Journal of the Korea Convergence Society
• /
• v.11 no.11
• /
• pp.135-145
• /
• 2020

In the era of the fourth industrial revolution, design has developed into a fusion of diversified culture and media. The integration of traditional culture and brand design concepts has become a hot research topic. Chinese Zen thought integrates the thoughts of Laozi and Zhuangzi, and takes" Wu Xiang as the appearance, Wu Nian as the foundation, Wu Zhu as the purpose" as the main purpose to construct a unique Zen thought system that integrates Taoism, Confucian philosophy and aesthetics. From this point of view, the MUJI design that combines Chinese Zen thought and design has attracted much attention. As a traditional culture, how is Chinese Zen Thought reflected in the design of MUJI? Starting from the awareness of this question, this study takes the daily necessities of MUJI as an example to investigate the design features of MUJI that reflect Chinese Zen thought. The conclusion shows that the design features of MUJI with Chinese Zen thoughts are showed in four ways-minimalist style, unitary color, ecological material, and humanized experience.

• Fashion & Textile Research Journal
• /
• v.11 no.5
• /
• pp.764-770
• /
• 2009

This study was conducted to analyze the wearing condition on gloves for pilots and to suggest the developments for pilot gloves design. This survey was performed with 99 pilots and the questionnaires included items about discomfort, materials and problems when wearing pilot gloves. The respondents felt uncomfortable on the finger tip, the hollow area of the hand and the end of thumb when they move their hands with the gloves. They replied that the finger length, palm length, and circumference of the fingers did not match well. Also they complained there was severe abrasion in the tip of the thumb, finger tips and the middle of the palm of the gloves. The result of these analyses supports the following suggestions. It is necessary to improve durability by applying the additional materials to the severely worn parts. Punching on the glove materials could improve sweat rate and ventilation, and careful washing should be accompanied to prevent the occurrence of linters and transformation after laundering. And it is needed to prepare an accurate and more diversified size system and to design the gloves fitted to the individual hands. With these in mind, it is required to propose solutions for pilot gloves with reference to the survey results in order to design appropriate pilot gloves in terms of movement, size and material. It was concluded that an analysis of the wearing condition and developments are useful for ergonomics pilot gloves design.