• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.504-508
• /
• 2004

An EMC analysis of a switched mode power supply (SMPS) have been usually using unbalance circuit topologies and the major factor of disturbance is parasitic capacitance. We have proposed a balanced switching converter circuit, which is an effective way to reduce the common mode conducted noise. In this paper presents the relationship between common mode current and radiated field.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.474-477
• /
• 2002

Hearing loss caused by exposure to industrial machine noise results in devastating disability that is mostly preventable. And recent researches indicate that the noise may also induce hypertension and cardiovascular disease. In addition the sleep polygraph provides many indicators of sleep disturbance by the noise. In this paper we make an analysis on ball bearing machine noise, a kind of the industrial noise. The analysis of Its power spectrum is based on FFT(Fast Fourier Transform). And then the spectral results of the noise are compared with that of the spectrum for an auditory signal. The signal is measured from the pronunciation of two Koreans. Finally we suggest the most important stratagem to prevent the noise for worker's health and efficiency.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.11
• /
• pp.34-41
• /
• 2003

In this paper, 60GHz band transmitter and receiver for wireless LAN are designed and implemented using the broband amplifier and mixer fabricated by standard 0.1${\mu}{\textrm}{m}$ MIMIC process of MINT. Output power and gain of the RF transmitter are 0 ㏈m and 1.7㏈, respectively. Noise figure and gain of the receiver are 4.2㏈ and l5.7dB, respectively. Considering the sensitivity and LOS test, this system can communicate with BER of below than 10$^{-6}$ at a distance more than 35m. DSSS, which is strong for concealment and disturbance, is adopted.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.519-520
• /
• 2016

BLSRM is a nonlinear, strong coupling and multi-variable system. The conventional control method is vulnerable to uncertain factors such as the load disturbance and satellite parameters change. It is difficult to obtain satisfactory control effect. Basing on a 8/10 BLSRM, whose suspending force control is separated with the torque control, this paper presents adaptive fuzzy PID controller for levitation control, which apply the fuzzy logic control to the conventional PID controller for parameters self-tuning. Both fuzzy and parameters of PID controller are self-tuning on-line, which improve the performance of controller. Finally, simulation and experimental results show the performance of the proposed method.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.491-492
• /
• 2016

This paper presents a robust feedback control design to mitigate the effect of grid voltage disturbances for three-phase grid-connected inverters in distributed generation systems. The proposed strategy consists of two major design steps. First, the controller is synthesized using the internal model principle to achieve a good reference tracking and disturbance rejection performance. Then, the feedback gain is systematically obtained by solving the linear matrix inequality conditions which are directly derived from the stability criteria. The main contribution of this paper is that the complexity of control structure can be substantially reduced and transient response is improved as compared with the existing robust control design methods. The simulation results are given to prove the validity of the proposed control scheme.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.6 no.4
• /
• pp.390-396
• /
• 1982

The onset of longitudinal vortices in horizontal Blasius flow isothermally heated from below is studied analytically. The assumption that at the onset of thermal instability the thermal disturbances are confined within the thermal boundary layer is employed for the limiting case of large Prandtl number. Polynomial representations for the basic quantities obtained by the integral method of the boundary layer analysis have been used. Then the system of differential equations and boundary conditions for disturbance quantities is reformulated in a convenient form so that the solutions may be constructed as rapidly convergent power series. The critical buoyancy parameter G $r_{x}$ $^{*}$ /R $e^{*1.5}$ falls between 2 and 6, which is about one order of magnitude lower than the existing experimental values. It is also shown that the positions of the onset of instability can be closely predicted by the present theory.y.y.

• 전기의세계
• /
• v.43 no.4
• /
• pp.20-26
• /
• 1994

전력계통은, 발전기, 변압기, 모선, 선로등을 주요소로 한 많은 설비요소로 구성되며, 이들이 일체로 되어 하나의 안정상태를 유지하면서 운용되고 있다. 전력계통 구성요소중, 특히 가공선로는 지역적으로 널리 분포되어 있으므로, 뢰, 풍우, 염분 등 자연 현상의 영향을 받아 단락, 지락등 계통사고 발생이 불가피하며, 또 다른 구성요소들도 각각 고유한 사고형태와 사고빈도를 가지고 있다. 보호방식은 이들 각종 설비에 사고가 발생하였을 때에, 신속히 사고설비를 계통에서 제거하여, 사고 전류의 계속으로 인한 설비손상을 방지하는 것을 그 기본목표의 하나로 하고 잇다. 그러나 사고발생은 단지 설비의 손상을 가져올 뿐만 아니라, 하나의 안정상태를 유지하고 운용되고 있는 전력계통 전체에 대해서, 이 안정을 무너뜨리는 방아쇠로 작용하며, 사고의 계속, 또는 사고제거에 따른 계통구성의 급변등은 주파수의 저하, 계통탈조, 설비과부하등으로 파급되어 전계통 붕괴로 확대될 가능성을 가지고 있다. 이러한 경향은 전원의 원격화와 집중대용량화, 선로조류의 증가등으로, 계통이 복잡화함에 따라 더 증대하고 있다. 이러한 배경을 바탕으로 하여 보호방식의 책무는, 종전의 설비보호 위주에서 사고파급방지에 의한 계통보호(protection for power system disturbance)로 그 중점목적이 옮겨가고 있으며, 이 사고 파급방지보호장치를 계통안정화장치라고도 한다.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.97-100
• /
• 1997

A new control method for the robust position control of a brushless DC(BLDC) motor using the asymptotically stable adaptive load torque observer is presented. A precision position control is obtained for the BLDC motor system approximately linearized using the field-orientation method. And the application of the load torque observer is published in [1] using fixed gain. However, the flux linkage is not exactly known for a load torque observer. Therefore, a model reference adaptive observer is considered to overcome the problem of the unknown parameter in this paper. And stability analysis is carried out using Liapunov stability theorem. As a result, asymptotically stable observer gain can be obtained without affecting the overall system response. The load disturbance detected by the asymptotically stable adaptive observer is compensated by feedforwarding the equivalent current having the fast response.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.89-96
• /
• 1997

A robust speed control scheme for a brushless DC(BLDC) motor using an adaptive input-output linearization technique is presented. By using this technique, the nonlinear motor model can be linearized in Brunovski canonical form, and the desired speed dynamics can be obtained based on the linearized model. This control technique, however, gives an undesirable output performance under the mismatch of the system parameters and load conditions. For the robust output response, the controller parameters will be estimated by a model reference adaptive technique where the disturbance torque and flux linkage are estimated. The adaptation laws are derived by the Popov's hyperstability theory and positivity concept. The proposed control scheme is implemented on a BLDC motor using the software of DSP TMS320C30 and the effectiveness is verified through the comparative experiments.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.171-176
• /
• 1997

This paper presents a design method of the continuous inertial binary observer which includes the rotor flux and speed estimations. The sliding observer based on the variable structure theory ensures the robustness of disturbance and is applied for the method to keep an insensitivity for the variations of parameter. Sliding observer, however, has a high-frequency chattering deteriorating the state estimation performance. To reduce the chattering on the sliding surface in sliding observer and improve the estimation performance, binary observer scheme which has main advantages such as the absence of high-frequency chattering and the finite gains is applied in this paper. Computer simulation results show the effectiveness of binary observer proposed here for the induction motor drives.