• 제목/요약/키워드: distribution ratios and characteristics

검색결과 273건 처리시간 0.022초

Characteristics of Products in the Reaction 40 MeV/nucleon $^{14}N+Ag$

  • Chung, Yong-Hee;Porile, N. T.
    • Bulletin of the Korean Chemical Society
    • /
    • 제15권11호
    • /
    • pp.971-975
    • /
    • 1994
  • Cross sections and recoil properties have been measured for the fragments produced in the interaction of silver with 40 MeV/nucleon $^{14}N$ ions using off-line ${\gamma}$-ray spectroscopy. The data were used to obtain the isobaric-yield distribution, the mass yield distribution, and the fractional momentum transfer. The values of forward-to-backward ratios were measured to be very large, indicating that substantial momentum transfer occurs at this energy regime. The results are compared with other studies of the interaction of silver with intermediate-energy heavy ions.

원관내의 이상선회유동 특성에 관한 연구 (The study on the Two-Phase Swirl Flow Characteristics in Cylindrical Pipe)

  • 차경옥;김재근
    • 한국자동차공학회논문집
    • /
    • 제4권1호
    • /
    • pp.187-197
    • /
    • 1996
  • Many investigations have been made to determine the pressure drop and heat transfer characteristics for single phase flow in tape generated swirl flow. But few studies have been carried out to investigate the heat transfer in two component, two phase swirl flow with non-boiling. An experimental study has been conducted to determine the effects of tape twist ratios on two phase convective heat transfer coefficients, pressure drop, and void fraction distribution in a non-boiling, air-water, two phase flow. The flow conditions were both swirl and non swirl flows. The internal diameter of the test section is 42.5mm. The tape twist ratios of pitch to diameter ratio varied from 4.0 to 10.6. The heating conditions were isothermal and nonisothermal. The flow patterns identified with experiments were bubbly, bubbly-slug, slug, and slug-annular flow in up-flow. This study has concluded that no significant difference in void fraction distribution were observed both isothermal and nonisothermal conditions, the pressure drop for two phase flow with twisted tape swirler increase as the tape twist ratio decrease, and that values of two phase heat transfer coefficient increase when the tape twist ratio decreases.

  • PDF

전남과 광주지역 구성암류의 GIS에 의한 지질시대별 암층별 분포율 및 분포특성 (GIS-based Areal Distribution Ratios and Characteristics of Constituent Rocks with Geologic Ages and Rock Types in Jeonnam and Gwangju Areas)

  • 윤현수;이진영;홍세선;양동윤;김주용;조등룡
    • 암석학회지
    • /
    • 제22권2호
    • /
    • pp.153-177
    • /
    • 2013
  • 국토의 효율적 관리를 위한 각종 지질정보자료로 활용될 수 있도록 ArcGIS 10.1 프로그램, 1 대 250,000의 수치지질도 및 지형도를 사용하여 전남과 광주지역 구성암류의 지질시대별 및 암층별 분포율과 분포특성을 도출하였다. 전남지역 의 지질시대는 모두 7개로 대분되며, 분포율은 백악기, 선캠브리아기, 쥬라기, 제4기, 시대미상, 석탄기-삼첩기 및 삼첩기의 순으로 감소하며, 그 중 전자 넷이 94.80%를 이루어 거의 대부분을 차지한다. 구성암층은 선캠브리아기 15개, 시대미상 6개, 석탄기-삼첩기 3개, 삼첩기 2개, 쥬라기 4개, 백악기 25개 그리고 제4기 2개로서 도합 57개에 달한다. 분포율은 백악기의 Kav(산성 화산암류+유문암 및 유문암질 응회암)와 Kiv(중성 및 염기성 화산암류+안산암 및 안산암질 응회암), 선캠브리아기의 지리산편마암복합체(소백산육괴)인 화강편마암과 반상변정질 편마암, 제4기의 충적층, 쥬라기의 화강암류와 엽리상화강암의 순으로 감소하며 이들이 도합 71.68%의 우세한 값을 이룬다. 그 중 뚜렷하게 우세한 Kav는 전남지역의 북부, 서부, 중부, 동부 및 남부에 보다 넓게 발달하며, 특히 서부인 신안 및 목포-영암, 남부인 해남일대에 더 우세하게 분포하는 양상을 보인다. 광주지역의 지질시대는 모두 5개로 대분되고 분포율은 쥬라기, 제4기, 백악기, 선캠브리아기 그리고 시대미상의 순으로 감소하며, 그 중 전자 넷이 98.95%를 가져 거의 전부를 이룬다. 구성암층은 선캠브리아기 1개, 시대미상 2개, 쥬라기 2개, 백악기 6개와 제4기 1개로서 도합 12개에 달한다. 분포율은 쥬라기 화강암류, 제4기 충적층, 선캠브리아기의 소백산편마암복합체인 화강편마암과 백악기 Kiv 순으로 감소하고 도합 91.30%를 가져 그 대부분을 차지하며 전자 둘에서 뚜렷하게 우세하다. 가장 우세한 화강암류는 대부분 광주지역 남서부에서 북동부 방향에 걸쳐 발달한다. 충적층은 대부분 황룡강, 영산강과 이들의 합류부에 발달하며, 북구에서는 영산강변에서 용두평야 그리고 광산구에서는 영산강과 황룡강 합류부에서 동계평야 등을 이룬다.

희박한 당량비 구간에서 이중 선회버너의 배출특성 연구 (Emission studies of a dual swirl burner in the region of lean equivalence ratios)

  • 박태준;이기만
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
    • /
    • pp.111-112
    • /
    • 2013
  • An experimental study of a dual swirl burner was conducted to analyze NOx emission in the lean conditions. The dual swirl burner is composed of a combination of swirling jet premixed(main section) and diffusion flames(pilot section). It was operated with a co-swirling configuration and overall equivalence ratios between 0.6 and 0.8. The purpose of this study is to analyze experimentally the characterization of flame temperature and NOx concentration in reacting zone and to supply the useful experimental data for numerical simulations. The measurements of temperature and NOx concentration were captured using a thin digitally-compensated thermocouple and a sampling quartz probe with quenching effect of sudden expansion, and were measured by the NOx analyzer of chemiluminescence method. We could analyse the NOx emission characteristics comparing the temperature distributions in the lean equivalence ratios.

  • PDF

철근보강 폴리마 콘크리트보의 변형특성 (Deformation Characteristics of Reinforced Polymer Concrete Beams)

  • 연규석
    • 한국농공학회지
    • /
    • 제30권1호
    • /
    • pp.63-72
    • /
    • 1988
  • The primary objective of the study was to find the deformation characteristics of reinforced polymer concrete beams. A test program was carried out to compare the behavior in deformation of polyester and MMA concrete beams with cement concrete beams but with varying ratios of tensile reinforcement. From the results the following conclusions can be made. 1.The various strengths of polymer concrete ware very high compared to the strengths for cement concrete. Also, compared to conventional concrete beams, flexural strength of reinforced polymer concrete beams was distinctly higher for the same section and steel ratios. 2.The polymer concrete beams exhibit large deflections accompanied by relatively high strengths as compared to cement concrete beams. 3.The average ultimate strain at the extreme compression fiber of polymer concrete beams was 0.01 1 cm / cm, and this value was about three to four times as large as that of cement concrete beams, 4.The polymer concrete beams developed more cracks which were more wide crack distribution spacing than the cement concrete beams, and the beams failed in a more ductile manner. 5.The reinforcing steel ratio has a significant effect on the beam strength, load-deflection response, stress-strain curve, and crack pattern of polymer concrete beams.

  • PDF

A Study on the Status and Spatial Autocorrelation of Vacant Houses in Jeollabuk-do, South Korea

  • Kim, Jun-Young
    • 한국농촌건축학회논문집
    • /
    • 제26권2호
    • /
    • pp.27-36
    • /
    • 2024
  • Many houses have been left vacant in cities worldwide due to changes in the economy, society, and urban composition. The increase in vacant houses causes social problems and decrease in the value of real estate. Considering the cost of preparing a new residence because the existing residence no longer functions, it is an important problem to solve empty houses in the existing residence. Accordingly, policy attempts and studies to reduce and utilize vacant houses are in progress in various countries. In South Korea, the ratio of vacant houses was 6.4% of all houses as of 2021, and in Jeolla-buk-do, it was 11.6%, which is higher than the national average. Jeollabuk-do conducted a fact-finding survey on countermeasures against vacant houses; 17,732 vacant houses (2.4%) were surveyed. The urbanization, population, and terrain of Jeollabuk-do, consisting of 14 cities and counties, were considered. The ratios, types, grades, and spatial autocorrelations of vacant houses were analyzed after classification into city areas (focus, small, and medium) and county areas (plains and mountains) areas to derive policies according to the distribution of vacant houses. The average difference in ratio, type, grade, and spatial autocorrelation of vacant houses was used to analyze the characteristics of the distribution of vacant houses according to these classifications. There were significant differences in the averages of the ratios, grades, and spatial autocorrelations between city and county areas. The autocorrelation of vacant house distribution exhibited differences between urban and county areas.

PM2.5, PM10, TSP의 시간대별 관측결과에 기초한 황사기간 중 분진의 분포특성에 대한 고찰: 서울시의 4대 관측점을 중심으로 한 2001년 봄철 황사 기간에 대한 사례연구 (Insights into the Factors Determining the Aerosol Distribution Characteristics of the Asian Dust on the Basis of the Concurrent Analysis of PM2.5, PM10, and TSP During the Spring Season of 2001)

  • 김기현;김민영;신재영;최규훈;강창희
    • 한국대기환경학회지
    • /
    • 제18권5호
    • /
    • pp.419-426
    • /
    • 2002
  • The concentrations of three different fractions of particulate matters including PM2.5, PM10, and TSP were compared between the Asian Dust (AD) and non-AD (NAD) periods during the spring season of 2001. For the purpose of this comparative analysis, the data sets were obtained from four different observatory sites located within the city boundary of Seoul that concurrently measure those three fractions of PM at hourly intervals. According to our study, several conclusions can be drawn to describe relationships between the AD event and PM distribution characteristics. First of all, it is apparent that the concentrations of PM are distinctively distinguished between AD and NAD. If the extent of contribution to the AD events are assessed on the quantitative basis, it appears that their magnitude increases on the order of PM2.5, PM10, and TSP. As a result, the increase of PM observed during AD event is dominated by the coarse rather than fine fraction of PM. Moreover, when their relationships were assessed in terms of fractional ratios, it was found that TSP/PM10 ratios were almost constant, regardless of the occurrences of AD. On the other hand, the coarse/fine or TSP/PM2.5 ratios changed dramatically between AD and NAD periods. The results of our analysis cleary distinguishes quantitative role of each PM fraction between AD and NAD period, while suggesting indirectly the possible control of source processes on such relationships.

전단경간비가 3 이하인 철근콘크리트 보의 스트럿-타이 모델 및 하중분배율(I) 모델 및 하중분배율 (Strut-Tie Models and Load Distribution Ratios for Reinforced Concrete Beams with Shear Span-to-Effective Depth Ratio of Less than 3 (I) Models and Load Distribution Ratios)

  • 채현수;윤영묵
    • 콘크리트학회논문집
    • /
    • 제28권3호
    • /
    • pp.257-265
    • /
    • 2016
  • 철근콘크리트 깊은 보의 파괴거동은 전단경간비, 휨철근비, 하중점과 지지점의 조건, 그리고 사용재료의 성질 등의 여러 변수간의 복합적인 역학관계로 인해 매우 복잡하다. 이 논문에서는 철근콘크리트 깊은 보의 파괴거동 특성을 합리적인 방법으로 반영하여 전단경간비가 3 이하인 철근콘크리트 보의 설계를 수행할 수 있는 두 종류의 단순 1차 부정정 스트럿-타이 모델을 제안하였다. 또한 1차 부정정 스트럿-타이 모델을 정정 스트럿-타이 모델로 변환시켜 현행 스트럿-타이 모델 설계기준에 의한 철근콘크리트 깊은 보의 설계를 가능하게 하는 부정정 스트럿-타이 모델의 하중분배율을 제안하였다. 하중분배율 결정 시 철근콘크리트 보의 강도 및 거동에 영향을 미치는 전단경간비, 휨철근비, 콘크리트의 압축강도 등의 영향을 반영하였다. 이 논문의 동반논문에서는 여러 현행 설계기준의 방법들과 이 연구에서 제안한 스트럿-타이 모델 및 하중분배율을 이용하여 파괴실험이 수행된 전단경간비가 3 이하인 다양한 종류의 335개 철근콘크리트 보의 강도를 평가하고, 이 연구에서 제안한 스트럿-타이 모델 및 하중분배율의 타당성을 검증하였다.

제품담배 연기성분 분포 특성 조사 및 물리적 특성과의 관련성 구명 (Study of Smoking Component Distribution and the Relation between Chemical Components and Physical Characteristics of Cigarettes)

  • 황건중;이영택
    • 한국연초학회지
    • /
    • 제23권2호
    • /
    • pp.179-184
    • /
    • 2001
  • This study was conducted to determine the smoke component distribution and the relationship between chemical components and physical characteristics of cigarettes. 16 different cigarette brands which were sold in the market were selected for this study. Five kinds of smoke components which have been tar, nicotine, water, carbon monoxide(CO) puff No., and six kinds of physical characteristics which were filter type, leaf weight, filter weight, UPD, EPD, dilution rate were analyzed. The average values in tar, nicotine, water, CO concentration were 6.5 mg/cig. 0.66 mg/cig, 1.12 mg/cig. and 6.32 mg/cig., respectively. The average ratios of nicotine/tar and CO/tar were 0.10, and 1.02 respectively. The distribution of smoke components collected in the cambridge filter and cigarette filter was different. The averages of tar and nicotine removal efficiency by a cigarette filter were 53%, and 48%, respectively. All smoking components were positively correlated with other smoking components. filter types, EPD, and dilution rate were showed high correlation to the changes of smoke components. Especially, dilution rate of cigarette strongly affected on the changes of all smoke components.

  • PDF

서낙동강 유역의 강물, 저토 및 토양의 중금속 분포 특성 (The Distribution Characteristics of Heavy Metals in the Water, Sediment and Soil along the West Nakdong River)

  • 박흥재;박종길;박원수
    • 한국환경과학회지
    • /
    • 제3권4호
    • /
    • pp.409-416
    • /
    • 1994
  • This study was Performed to evaluate the contents of heavy metals in water, sediment and soil of the 7 different sampling points along the West Nakdong river, The results were as follows: the concentrations of Zn, p, Pb, Cd, Mn, Cu and As in the sediment were 197.48, 551.85, 67.01, 2.54, 491.39, 42.95 and 10.52ppm, respectively. The concentrations of Zn, p, Pb, Cd, Mn, Cu and As in the soil was 83.32, 482.89, 17.15, 1.02, 226.02, 26.15 and 7.29ppm, respectively. The concentration ratios of heavy metals In the water to the sediment were 593 - 12700 (Cd >> Cu > Zn > Mn > As > Pb) and that of the water to the soil were 152 - 5100 (Cu > Cd > Zn > Mn > As >Pb). The correlation coefficients of Cu and Pb weve high among the water, sediment and soil. Because the accumulation amounts of heavy metal in the sediment were high, the concentration of heavy metals in the sediment was higher than in soil. The correlation coefficient of heavy metals among water, sediment and soil was high (0.79 - 0.95). Key Words Distribution Characteristics, heavy metals, West Nakdong River.

  • PDF