• 대한한방내과학회지
• /
• 제40권1호
• /
• pp.1-12
• /
• 2019

Objective: To investigate the effect of Alpiniae oxyphyllae fructus (AOF) on the alleviation of musculoskeletal disorders caused by aging, we conducted experiments on osteoporosis and muscle atrophy. Methods: The experimental group was classified into a control group, aging-elicited (AE) group and AOF group. The control group comprised 8-week-old Institute of Cancer Research (ICR) mice. The AE and AOF groups were ICR mice at 50 weeks of age. For the AE group, 10 mL of distilled water was administered once a day for 180 days without any treatment. An AOF extract (0.54 g/kg) was dissolved in distilled water and administered to the mice in the AOF group once a day for 180 days. Results: In the experiment on the alleviation of osteoporosis, the distribution of glucosaminoglycan in the bone matrix of the femoral bone was increased in the AOF group; moreover, the osteocalcin (OCN) positive reaction was increased and 8-OHdG positivity was decreased. In addition, AOF positively decreased RANKL, positively increased OPG, and positively decreased MMP-3. Muscle fiber loss in the endomysium following muscle degeneration of the quadriceps was reduced more in the AOF group compared with the AE group, and caspase-3 positive responses were also decreased. In addition, the 8-OHdG and p-lkB positivity in the AOF group decreased compared with the AE group, and the Myo-D positivity increased. Conclusion: We found that increasing bone formation alleviates osteoporosis, and that reducing bone loss alleviates muscle atrophy by reducing muscle loss and increasing muscle development.

• 공업화학
• /
• 제30권2호
• /
• pp.233-240
• /
• 2019

분자인식기술은 특정 분자를 고분자 매트릭스에 각인시켜 특정 분자의 선택성을 높이는 기술로 관심을 받아왔다. 이 연구에서는 Sulindac (SLD)을 각인시킨 키토산 기반 약물 전달용 필름의 흡착 및 방출 특성을 가소제, 온도, pH를 변화시켜 실험하고 그 결과를 관련 모델식으로 해석하였다. SLD 각인 고분자 필름의 약물 흡착은 Freundlich와 Sips식이 Langmuir식보다 더 잘 설명되었고 binding site 에너지 분포 함수는 SLD와 고분자 필름 간의 흡착 특성관계를 이해하는데 유용하였다. 그리고 SLD 각인 고분자 필름의 약물 방출은 Fickian 확산 거동을 보인 반면, 인공피부조건에서는 non-Fickian 확산 거동을 따랐다.

• 소성∙가공
• /
• 제30권1호
• /
• pp.5-15
• /
• 2021

The effects of heat treatments (T6 and T73) on the microstructure, mechanical properties, and high cycle fatigue behavior of modified AA7075 alloys were investigated. A modified 7075 alloy was manufactured using modified-Mg (Mg-Al2Ca) instead of the conventional element Mg. Based on the microstructure, the average grain size was 4.5 ㎛ (T6) and 5.2 ㎛ (T73). Regardless of heat treatment, the modified AA7075 alloys consisted of Al matrix containing homogeneously distributed Al2CuMg and MgZn2 phases with reduced Fe-intermetallic compound. Room temperature tensile tests showed that the properties of modified 7075-T6 (Y.S.: 622MPa, T.S: 675MPa, elongation: 15.4%) were superior to those of T73 alloy (Y.S.: 492MPa, T.S: 548MPa, elongation: 12.8%). Experimental data show that the fatigue life of T6 was 400 MPa, about 64% of its yield strength. However, the fatigue life of T73 alloy was 330 MPa and 67%. Irrespective of the stress level, all crack initiation points were located on the specimen surface, and no inclusions acting as stress concentrators were seen. Superior mechanical properties and high cycle fatigue behavior of modified AA7075-T6 alloy are attributed to the fine grains and homogeneous distribution of small second phases such as MgZn2 and Al2CuMg, in addition to reduced Fe-intermetallic compounds.

• 한국정보통신학회논문지
• /
• 제25권1호
• /
• pp.56-62
• /
• 2021

미세먼지 예보에 대한 높은 정확도가 요구됨에 따라 기계 학습의 알고리즘을 적용하여 예측 정확도를 높이려는 다양한 시도들이 이루어지고 있다. 그러나 미세먼지의 특성과 불균형적인 농도별 발생 비율에 대한 문제로 예측 모델의 학습 및 예측이 잘 이루어지지 않는다. 이러한 문제를 해결하기 위해 특정 농도를 기준으로 미세먼지를 저농도와 고농도로 구분하여 예측을 수행하는 등 다양한 연구가 진행되고 있다. 본 논문에서는 미세먼지 농도의 불균형 특성으로 인한 예측 성능 향상의 문제를 해결하기 위한 미세먼지 농도의 이진 분류 모델을 제안하였다. 분류 알고리즘 중 logistic regression, decision tree, SVM 및 MLP를 이용하여 PM10에 대한 이진분류 모델들을 설계하였다. 오차 행렬을 통해 성능을 비교한 결과, 4가지 모델 중 MLP 모델이 89.98%의 정확도로 가장 높은 이진 분류 성능을 보였다.

• 대한금속재료학회지
• /
• 제50권12호
• /
• pp.931-937
• /
• 2012

The microstructure of Cu-15 wt%Ag composites fabricated by equal channel angular pressing (ECAP) with intermediate heat treatment at $320^{\circ}C$ was investigated by transmission electron microscopy (TEM) observations. Ag precipitates with a thickness of 20-40 nm were observed in the eutectic region of the Cu-15 wt%Ag composite solution treated at $700^{\circ}C$ before ECAP. The Cu matrix and Ag precipitates had a cube on cube orientation relationship. ECAPed composites exhibited ultrafine-grained microstructures with the shape and distribution dependent on the processing routes. For route A in which the sample was pressed without rotation between each pass, the Cu and Ag grains were elongated along the shear direction and many micro-twins were observed in elongated Cu grains as well as in Ag filaments. The steps were observed on coherent twin boundaries in Cu grains. For route Bc in which the sample was rotated by 90 degrees after each pass, a subgrain structure with misorientation of 2-4 degree by fragmentation of the large Cu grains were observed. For route C in which the sample was rotated by 180 degrees after each pass, the microstructure was similar to that of the route A sample. However, the thickness of the elongated grains along the shear direction was wider than that of the route A sample and the twin density was lower than the route A sample. It was found that more microtwins were formed in ECAPed Cu-15 wt%Ag than in the drawn sample. Grain boundaries were observed in relatively thick and long Ag filaments in Cu-15 wt%Ag ECAPed by route C, indicating the multi-crystalline nature of Ag filaments.

• 대한토목학회논문집
• /
• 제40권6호
• /
• pp.563-569
• /
• 2020

기상현상 발생에 대한 기존 기상예보 방식에서 벗어나 기상재해가 사회와 인간생활에 끼치는 영향을 제공함으로써 사전에 영향범위에 대한 피해예방 및 행동예방을 취할 수 있는 영향예보를 제공하는 것이 필요하다. 이를 위해 미국, 영국, 프랑스 등 세계 각국에서는 호우, 폭설, 한파 등의 영향예보를 시행하고 있으며, 보다 효율적인 예보방안에 대해 고민하고 있다. 본 연구에서는 여러 기상현상 중 호우에 대한 영향예보를 국내의 실정에 맞도록 개선하고, 적용하기 위해 33개의 호우영향인자(Impact Library)를 격자단위(1 km)로 구축하고, 표준정규분포법을 이용하여 4개의 위험등급(Minimal, minor, significant, severe)의 기준을 산정하였다. 산정된 기준은 호우영향 대상체인 사람, 시설, 농업, 교통을 중심으로 한 6개의 카테고리(Residential, commercial, utility, community, agriculture, transport)에 대한 호우위험영향(Heavy rain risk impact)를 산정하기 위한 지표로 활용된다.

• Mass Spectrometry Letters
• /
• 제12권1호
• /
• pp.21-25
• /
• 2021

We aimed to develop and validate a sensitive analytical method of nannozinone A, active metabolite of Nannochelins A extracted from the Myxobacterium Nannocytis pusilla, in mouse plasma using a liquid chromatography-tandem mass spectrometry (LC-MS/MS). Mouse plasma samples containing nannozinone A and 13C-caffeine (internal standard) were extracted using a liquid-liquid extraction (LLE) method with methyl tert-butyl ether. Standard calibration curves were linear in the concentration range of 1 - 1000 ng/mL (r2 > 0.998) with the inter- and intra-day accuracy and precision results less than 15%. LLE method gave results in the high and reproducible extraction recovery in the range of 78.00-81.08% with limited matrix effect in the range of 70.56-96.49%. The pharmacokinetics of nannozinone A after intravenous injection (5 mg/kg) and oral administration (30 mg/kg) of nannozinone A were investigated using the validated LC-MS/MS analysis of nannozinone A. The absolute oral bioavailability of nannozinone A was 8.82%. Plasma concentration of nannozinone A after the intravenous injection sharply decreased for 4 h but plasma concentration of orally administered nannozinone A showed fast distribution and slow elimination for 24 h. In conclusion, we successfully applied this newly developed sensitive LC-MS/MS analytical method of nannozinone A to the pharmacokinetic evaluation of this compound. This method can be useful for further studies on the pharmacokinetic optimization and evaluating the druggability of nannozinone A including its efficacy and toxicity.

• Steel and Composite Structures
• /
• 제38권5호
• /
• pp.477-496
• /
• 2021

The main objective of this paper is to study vibration of sandwich open cylindrical panel with damaged core and FG face sheets based on three-dimensional theory of elasticity. The structures are made of a damaged isotropic core and two external face sheets. These skins are strengthened at the nanoscale level by randomly oriented Carbon nanotubes (CNTs) and are reinforced at the microscale stage by oriented straight fibers. These reinforcing phases are included in a polymer matrix and a three-phase approach based on the Eshelby-Mori-Tanaka scheme and on the Halpin-Tsai approach, which is developed to compute the overall mechanical properties of the composite material. Three complicated equations of motion for the panel under consideration are semi-analytically solved by using 2-D differential quadrature method. Several parametric analyses are carried out to investigate the mechanical behavior of these multi-layered structures depending on the damage features, through-the-thickness distribution and boundary conditions. It is seen that for the large amount of power-law index "P", increasing this parameter does not have significant effect on the non-dimensional natural frequency parameters of the FG sandwich curved panel. Results indicate that by increasing the value of isotropic damage parameter "D" up to the unity (fully damaged core) the frequency would tend to become zero. One can dictate the fiber variation profile through the radial direction of the sandwich panel via the amount of "P", "b" and "c" parameters. It should be noticed that with increase of volume fraction of fibers, the frequency parameter of the panels does not increase necessarily, so by considering suitable amounts of power-law index "P" and the parameters "b" and "c", one can get dynamic characteristics similar or better than the isotropic limit case for laminated FG curved panels.

• Steel and Composite Structures
• /
• 제38권5호
• /
• pp.533-545
• /
• 2021

What is desirable in engineering is to bring the engineering model as close to reality as possible while the simplicity of model is also considered. In recent years, several studies have been performed on nanocomposites but some of these studies are somewhat far from reality. For example, in many of these studies, the carbon nanotubes (CNTs) are assumed completely straight, flawless and uniformly distributed throughout the matrix but by studying nanocomposites, we find that this is not the case. In this paper, three steps have been taken to bring the presented models for nanocomposites closer to reality. One is that assuming the straightness of nanotubes is removed and the waviness is considered. Also, the nanotubes are not considered to be pristine and the influence of defect is included in accordance with reality. In addition, the approximation of uniform distribution of nanotubes is ignored and according to experimental observations, the effect of nanotube aggregation is considered. As far as we know, this is the first study on these three topics together in an article. Moreover, we also include the size effects in our models for nanocomposites. To show the accuracy of our models, our results are calibrated with experimental results and compared with theoretical model. For numerical examples, we present the buckling behaviors of nanocomposites including the size effects using nonlocal theory and compare the results of our models with the results of models with above-mentioned approximations.

• 한국물환경학회지
• /
• 제38권1호
• /
• pp.31-42
• /
• 2022

Dissolved organic matter (DOM), which changes according to various factors, is ubiquitously present from natural environments to engineered treatment systems. Only limited information is available regarding the environmental functions of DOM after bulk analyses are only applied for characterization. In this paper, latest DOM analytical techniques are briefly introduced, which include fluorescence excitation-emission matrix with parallel factor analysis (EEM-PARAFAC), size-exclusion chromatography with an organic carbon detector (SEC-OCD), carbon/nitrogen stable-isotope ratio, and Fourier transform-ion cyclotron resonance-mass spectroscopy (FT-ICR-MS). Recent examples of using advanced analyses to interpret the phenomena associated with DOM occurring in natural and engineered systems are presented here. Through EEM-PARAFAC, different components like protein-like, fulvic-like, and humic-like can be identified and tracked individually through the investigated systems. SEC-OCD allows researchers to quantify different size fractions. FT-ICR-MS provides thousands of molecular formulas present in bulk DOM samples. Lastly, carbon/nitrogen stable-isotope ratio offers reasonable tools for tracking the sources in environments. We also discuss the advantages and weakness of the above-mentioned characterizing tools. Specifically, they focus on single environmental factors (different sourced-DOM and interaction of sediment-pore water) or simple changes after individual treatment processes. Through collaboration with the advanced techniques later, they help the researchers to better understand environmental behaviors in aquatic systems and serve as essential tools for addressing various pending problems associated with DOM.