• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.565-568
• /
• 2009

Most of the historic hot springs are artesian wells in Korea. However, many boreholes have been drilled due to the shortage of hot water, and hot water is now being pumped by submersible pump installed at most of hot spring areas. The distribution of boreholes are expected to be related to the geological structure, and the study was carried out to interpret the relationship between two factors. The distributional maps of boreholes were made and the geological structures were interpreted at eight hot spring areas. Some distributions of boreholes have no special direction, and these are not related to the geological structure at Dogo, Suanbo, and Deoksan. The others are consistent with the direction of the geological structure at Goseong, Onyang, Sokcho, Yuseong, and Bugok.

• 한국해양학회지
• /
• v.20 no.1
• /
• pp.56-73
• /
• 1985

The three-dimensional hydrodynamic numerical model of the Yellow Sea and the East China Sea has been further utilised to provide S$\sub$2/,K$\sub$1/,O$\sub$1/ tidal currents distribution in addition to previously provided M$\sub$2/ tidal current distribution(Choi, 1984), especially the vertical variation of horizontal current in the region. Model results have been compared with current meter data acquired from recent China-USA Marine Sedimentation Dyamics Programme (Larsen and Cannon, 1983). Results were also used to provide maps of the S$\sub$2/,K$\sub$1/,O$\sub$1/ tidal current constants and tidal ellipses at three depths to complement previous M$\sub$2/ tidal current information.

• Journal of Korea Water Resources Association
• /
• v.33 no.S1
• /
• pp.20-27
• /
• 2000

The grid-based KIneMatic wave STOrm Runoff Model(Kim, 1998; Kim, et al., 1998) which predicts temporal variation and spatial distribution of saturated overland flow, subsurface flow and stream flow was evaluated at two watersheds. this model adopts the single overland flowpath algorithm and simulates surface and/or subsurface water depth at each cell by using water balance of hydrologic components. the model programmed by C-language uses ASCII-formatted map data supported by the irregular gridded map of the GRASS (Geographic Resources Analysis Support System) GIS and generates the spatial distribution maps of discharge, flow depth and soil moisture of the watershed.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.11a
• /
• pp.262-265
• /
• 2000

In order to estimate spatial physicochemical properties of the spring waters in the study area, spring waters at 57 sites were investigated for measuring ten items (temperature, pH, Eh, EC, TDS, DO, salinity, alkalinity, discharge rate, and surface elevation), To compare each component with one another, regression analysis was carried out. Kriging was used to estimate the spatial characteristics and continuity of data in the study area. To solve kriging equation, the semivariogram was calculated using geostatistical software GS$^{+}$(version 3.1). As a result of semivariogram analysis, the data of nine components but surface elevation could be assumed as stationary random function, and ordinary kriging method was used for making contour maps.s.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.421-424
• /
• 2002

The 3-D measurement using a sinusoidal grating pattern projection is very attractive because of its high measuring speed and high sensitivity. When a sinusoidal amplitude grating was projected on an object, the surface-height distribution of the object is translated into a phase distribution of the deformed grating image. The phase-acquisition algorithms are so sufficiently simple that high-resolution phase maps using a CCD camera can be generated in a short time. The PMP technique is discussed, and the analysis of the systematic errors, the calibration procedure designed to determined the optimal setting of the measurement parameters is illustrated. Results of measurements and calibrations on the measurement plane objects are described.

• Tunnel and Underground Space
• /
• v.4 no.1
• /
• pp.1-16
• /
• 1994

The study on the flow characteristics and analysis of groundwater in discontinuous rock mass is very important, since the water inflow into the underground opening during excavation induces serious stability and environmental problems. To investigate the flow through single rock joint, the effect of various aperture distribution on the groundwater flow has been analyzed. Observed through the analysis is the "channel flow", the phenomenon that the flow is dominant along the path of large aperture for given joint. The equivalent hydraulic conductivity is estimated and verified through the application of the joint network analysis for 100 joint maps generated statistically. Both the analytic aproach based on isotropic continuum premise and the joint network analysis are tested and compared analyzing the gorundwater inflow for underground openings of different sizes and varying joint density. The joint network analysis is considered better to reflect the geometric properties of joint distribution in analyzing the groundwater flow.ater flow.

• Water Engineering Research
• /
• v.1 no.4
• /
• pp.321-330
• /
• 2000

The grid-based KIneMatic wave STOrm Runoff Model(Kim, 1998; Kim, et al., 1998) which predicts temporal variation and spatial distribution of overland flow, subsurface flow and stream flow was evaluated at two watersheds. This model adopts the single overland flowpath algorithm and simulates surface and/or subsurface water depth at each cell by using water balance of hydrologic components. The model programmed by C-language uses ASCII-formatted map data supported by the irregular gridded map of the GRASS(Geographic Resources Analysis Support System) GIS and generates the spatial distribution maps of discharge, flow depth and soil moisture of the watershed.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.381-384
• /
• 2004

The goal of this study is to generate a landslide susceptibility map using GIS(geographic information system) based method. A simple and efficient algorithm is proposed to generate a landslide susceptibility map from DEM(digital elevation model) and existing maps. The categories of controlling factors for landslides, aspect of slope, soil, topographical index, landuse, vegetation are defined, because those factors are said to have relevance to landslide and are easy to obtain theirs sources. The weight value for landslide susceptibility is calculated from the density of the area of landslide blocks in each class. Finally, a map of susceptibility zones is produced using the weight value of all controlling factors, and then each susceptibility zone is evaluated by comparing with the distribution of each controlling factor class.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.7
• /
• pp.1193-1205
• /
• 1994

This paper presents a fuzzy system that adaptively classifies subimages to four classes according to image activity distribution. In adaptive transform image coding, subimage classification improves the compression performance by assigning different bit maps to different classes. A conventional classification method sorts subimages by their AC energy and divides them to classes with equal number of subimages. The fuzzy system provides more flexible classification to natural images with various distribution of image details than does the conventional method. Clustering of training data in the input-output product space generated the fuzzy rules for subimage classification. The fuzzy system of small number of fuzzy rules successfully classified subimages to improve the compression performance of the transform image coding without sorting of AC energies.

• Korean Journal of Acupuncture
• /
• v.17 no.1
• /
• pp.173-177
• /
• 2000

We have observed the electrical resistance of every point in a $16{\times}64$ matrix that is projected to the medial side of human forearm. The electrical resistance against the 1.25V directing current was rated in discrete scale and illustrated in contour maps. The characteristics of distribution of electrical resistance and it's relations to so called Meridians were also discussed.