• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.3
• /
• pp.8-13
• /
• 2008

The paper proposes a model-based measurement of unsteady flow rate by using distributed parameter pipeline model and the measured pressure values at two distant points along the pipeline. The distributed parameter model of hydraulic pipeline is applied with consideration of frequency dependent viscosity friction and unsteady velocity distribution at a cross section of a pipeline. By using the self-diagnostics functions of the measurement method, the validity is investigated by comparison with the measured and estimated pressure and flow rate wave forms at the halfway section on the pipeline. The results show good agreement between the estimated flow rate wave forms and theoretical those under unsteady laminar flow conditions. The method proposed here is useful in estimating unsteady flow rate through an arbitrary cross section in hydraulic pipeline and components without installing an instantaneous flowmeter.

• Journal of information and communication convergence engineering
• /
• v.8 no.5
• /
• pp.473-478
• /
• 2010

Today's engineering design is carried out in a distributed fashion geographically or physically. This places new requirements on the computational environments such as efficient integration and collaboration. With the advances of the Internet and Network environment recently, many researches have been proposed and at the same time, Web-based distributed design gives to a new paradigm in design and manufacturing fields. That is, Web-based technologies lead to reduce the product development times and to ensure a competitive product in order to exchange and interact of real-time design information that integrates the distributed design environment between departments as well as companies via Internet and Web. So, an efficient data communication for design information sharing is the foundation for collaborative systems in the distributed environment. Design data communication techniques such as CORBA, DCOM and RMI have been considered in the existing research but they have some problems that are limitations of interoperability and firewall problems in the Web. Therefore, this paper presents a Web-based distributed design application where distributed design information resources are integrated and exchanged using Web Services for supporting XML and HTTP without the interoperability and firewall problems through the 330K VLCC case.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.9 s.174
• /
• pp.107-114
• /
• 2005

With the recent progress in flexible manufacturing systems (FMS) in industry, increasing attention has been given to Automatic Guided Vehicle (AGV) systems. An AGV is a self-powered unit for transporting materials between stations without needing to be controlled by an operator. Such a system has several sensors to recognize the external state, and it is designed to travel between stations automatically without external assistance. To manage each device automatically in real time it requires a distributed controller with a main computer as the host, as well as a number of micro-controllers. In this study, an AGV system with dual motor drive was constructed. A Pentium 4 personal computer was set up as the main host for the distributed control, and this communicated with other micro-controllers in the management of the motor. The speed of each motor was also controlled by a micro-controller.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.9
• /
• pp.82-92
• /
• 1998

An international standard for the product model data, STEP, and a standard for the distributed object technology, CORBA, will play a very important role in the future manufacturing environment. These two technologies provide background for the sharing of product data and the integration of applications on the network. This paper describes a prototype CAD/CAE environment that is integrated on the network by STEP and CORBA. Several application servers and client software were developed to verify the proposed concept. The present CAD/CAE environments are composed of several individual software components which are not tightly integrated. They also do not utilize the rapidly expanding network and object technologies for the collaboration in the product design process. In the design process in a large organization, sharing of application resources, design data and analysis data through the network will greatly enhance the productivity. The integration between applications can be supported by two key technologies, CORBA(Common Object Request Broker Architecture) and STEP(Standard for the Exchange of Product Model Bata). The CORBA provides interoperability between applications on different machines in heterogeneous distributed environments and seamlessly interconnects distributed object systems. Moreover, if all the data in the CAD/CAE environment are based on the STEP, then we can exclude all the data conversion problems between the application systems.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.2
• /
• pp.141-150
• /
• 2001

Manufacturing conb'ol applications consist of concurrent active components such as robots, AGV's (Automatic Guided Vehicles), and conveyors. Running of manufacturing control programs is interactions among those components. We can enhance the productivity and extendability of manufacturing control applications by using the object-oriented teclmology that models those components as reusable objects. But the objects in current object-oriented technology that encapsulate state and behavior infonnation are passive in a sense that those respond only when messages are sent to them. In this paper, we introduce the Distributed Active Object Systems (DAGS) approach that SUPPOltS active objects. Since active objects encapsulate control infonnation in addition to state and behavior information under COREA/Java-based distributed environment, they can represent manufacturing control components better than the objects in ordimuy object-oriented technology. TIus control infonnation provides an object with a featme that can monitor its own status as well as other object's status connected by intelface valiables. Active objects can initiate a behavior according to the change of those status. Therefore, we can sb-uctmally assemble self-initiating active objects by using intelface variables to construct a system without describing bow to control distributed objects by using message passing. As the DAOS approach supports object composability, we can enhal1ce the productivity and extendability of disbibuted manufactming control applications even better than the ordil1alY object-oriented approach. Also, the DAOS approach supports better component reusability with active objects that encapsulate control information .

• IE interfaces
• /
• v.13 no.3
• /
• pp.378-387
• /
• 2000

As the globalization of manufacturing companies continues, the scope of dependence between these companies and distributors, and other suppliers are growing very rapidly since no one company manufactures or distributes the whole product by themselves. And, the need to increase the efficiency of the whole supply chain is increasing. This paper deals with a multi-plant lot-sizing problem(MPLSP) which happens in a decentralized manufacturing system of a supply chain. In this study, we assume that the whole supply chain is driven by a single source of independent demand and many levels of dependent demands among manufacturing systems in the supply chain. We consider setup cost, transportation cost and time, and inventory holding cost as a decision factor in the MPLSP. The MPLSP is decomposed into two sub-problems: a planning problem of the whole supply chain and a lot-sizing problem of each manufacturing system. The supply chain planning problem becomes a pure linear programming problem and a Generalized Goal Decomposition method is used to solve the problem. Its result is used as a goal of the lot-sizing problem. The lot-sizing problem is solved using the CPLEX package, and then the coefficients of the planning problem are updated reflecting the lot-sizing solution. This procedure is repeated until termination criteria are met. The whole solution process is similar to Lagrangian relaxation method in the sense that the solutions are approaching the optimum in a recursive manner. Through experiments, the proposed closed-loop hierarchical planning and traditional hierarchical planning are compared to optimal solution, and it is shown that the proposed method is a very viable alternative for solving production planning problems of decentralized manufacturing systems and in other areas.

• The Journal of Information Systems
• /
• v.9 no.1
• /
• pp.217-234
• /
• 2000

This paper is to develop an information infrastructure to support managing process in design, planning, production, and quality control. Multi-media data set of design, product, and management information flow between organizational units of a virtual enterprise. The process is the logical organization of people, technology and practices incorporated into work activities to make an end product. The core of the infrastructure is the enterprise framework which coordinates activities and controls the process. The proposed framework manages collaborative activities across space and time, and between users and computers who share information in virtual community. It utilizes knowledge distributed through virtual community and fosters cooperation between organizations. The framework provides the following facilities； coordinating activities, sharing data and processes, visualizing multi-media data, customizing and updating processes, reusing data and processes. This paper covers design and manufacturing activities but our focus is initially targeted at design area.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.6
• /
• pp.831-835
• /
• 2010

Currently, engineering design is carried out in a distributed manner geographically or physically. This imposes new requirements on the computational environments, such as efficient integration and collaboration in the Internet and network environments. Meanwhile, Web-based distributed design has led new paradigms in design and manufacturing fields. For example, Web-based technologies have reduced the product development time and to ensure a competitive product in order to exchange and interact of real-time design information that integrates the distributed design environment between departments as well as companies via Internet and Web. Hence, efficient data communication for design information sharing is the basis for collaborative systems in the distributed environments. Design data communication techniques such as CORBA, DCOM, and JAVA RMI have been considered in the existing research, but these techniques have some disadvantages such as limitations of interoperability and firewall problems. This paper presents the application of engineering design problems in which distributed design information resources are integrated and exchanged using Web Service for supporting XML and HTTP without interoperability and firewall problems.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1061-1066
• /
• 2004

It is certain that the future manufacturing environment will be network-centric and spatially distributed based on Internet. Today, wide variety of distributed computing and communication technologies are available for implementing a system for product data exchange and sharing. One of the technologies that have been received most attentions for product data exchange and sharing is Product Data Management (PDM). PDM tries to integrate and manage process of data and technical documents that are connected to physical product components. In accordance to previous researches about PDM, it can be regarded as an integration tool of many different areas, which ensures that the right information is available to the right person at the right time and in the right form throughout the enterprise. PDM with Web-enabled CAD system is proposed in this paper in order to acknowledge the usefulness of the system mentioned. The system will use Web service on Visual Studio C#.Net to invoke the web application system.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.4
• /
• pp.118-127
• /
• 2003

An effective tool management system is one of the keys to maximizing the benefits of a computer integrated manufacturing (CIM). Tool management systems, however, are often tailored to the requirement of a highly automated system. Therefore, a different approach is needed for small and medium sized mold shops. This work deals with the implementation of tool management system for milling operations in small and medium sized CIM environment of injection mold production. In this paper, a distributed management approach is proposed for efficient tool management in relatively small machining shops in mold industry. And the design and the functions of the developed system are described.