• Journal of Welding and Joining
• /
• v.31 no.5
• /
• pp.7-14
• /
• 2013

The legitimacy of dominating factor in the high accuracy prediction of welding distortion was investigated for butt welding and fillet welding. When out-of-plane distortion was measured by the experiment objecting to butt welding, if tack welding was easily performed, the position of a neutral axis was variously changed by the irregularity. Then, there have been a case that out-of-plane distortion was generated in the unexpected direction. This case should be especially noted. New model for the experiment was proposed so as to solve this problem. As it was elucidated by the case of fillet welding, it was verified that the analysis should be carried out with satisfying the yield condition (especially at high temperature above 700 degree Celsius) and with closely simulating the penetration shape (heat input in weld metal) in order to solve the proposition that is the high accuracy prediction of welding distortion. It was confirmed that residual stress is highly predicted because welding distortion is highly predicted, too.

• The Journal of the Korea Contents Association
• /
• v.13 no.10
• /
• pp.1-8
• /
• 2013

In this paper, we propose a new method to correct the perspective distortion that occurs in the process of acquiring the integral images. In the proposed method, the distortion correction is based on the spectral characteristics of integral images. As element images of an integral image are repeated nearly periodically, its Fourier spectrum is given as an impulse train. On the contrary, the impulse train do not appear in the spectra of distorted images. In the proposed method, therefore, the perspective distortion parameters are detected by using the characteristics of the spectrum obtained through the Fourier transform, and then the distorted images are corrected by using the parameters. Through experiments, we verify that the proposed method effectively works for the perspective distortion correction.

• The Journal of the Korea Contents Association
• /
• v.15 no.11
• /
• pp.18-26
• /
• 2015

Geometric distortion and shadow effect due to capturing angle could be included in document copy images that are captured by a camera in stead of a scanner. In this paper, a clean black and white document image generation algorithm by distortion correction and shadow elimination based on a camera, is proposed. In order to correct geometric distortion such as straightening un-straight boundary lines occurred by camera lens radial distortion and eliminating outlying area included by camera direction, second derivative filter based document boundary detection method is developed. Black and white images have been generated by adaptive binarization method by eliminating shadow effect. Experimental results of the black and white document image generation algorithm by recovering geometrical distortion and eliminating shadow effect for the document images captured by smart phone camera, shows very good processing results.

• Korean Journal of Optics and Photonics
• /
• v.13 no.6
• /
• pp.501-505
• /
• 2002

We have numerically analysed the effects of the light sourer spectral power distortion in an optical CDMA system using PN codes and FBGI for ultra-fast multi-access optical networks. The interference between two CDMA channels decreases with an increase in the code length and the .simultaneous access number is equal to the code length in the region of 0 to 15% spectral power distortion. As a result, the spectral power distortion with optical spectrum is very important in designing the optical CDMA systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1C
• /
• pp.63-71
• /
• 2009

In this paper, a new low-complexity distortion estimation method for H.264 rate-distortion optimized mode decision is proposed. The coding processes, such as DCT, quantization, inverse quantization, inverse DCT, and reconstruction are needed to compute the distortion in an H.264 encoder. To reduce these processes, we estimate distortion using integer operations with coefficients obtained in the quantization process. Inverse quantization, inverse DCT, and reconstruction processes are not needed by the proposed method. For quantization parameters 24 to 36, experimental results show that the time saving of rate-distortion optimized mode decision is on average 29 % and as high as 42 % with negligible degradation in coding performance.

• Journal of the Korean Society of Radiology
• /
• v.7 no.4
• /
• pp.301-305
• /
• 2013

This thesis intends to analyze tooth distortion by mandibular arch form by reproducing existing panorama image and reconstructed panorama image of Cone Beam CT data with the three-dimensional computer program. The diameter of tooth measured in Cone Beam CT's cross-section image and reconstructed panorama was synchronized without any big change from incisors to posteriors. But, panorama showed serious distortion as going to posteriors after showing a little distortion in incisors. The panorama reconstructed for patients' individual arch showed reduced distortion than panoramas used generally. In addition, panorama showed serious distortion from incisors to posteriors and it means that distortion is reduced in reconstructed panorama.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.101-101
• /
• 2009

The purpose of this study is to develop the control technology of the welding distortion caused by Auto NG-GTA welding process at the STS 304 multi-pass butt weldment. For it, heat input model for Auto NG-GTA welding process was established and verified by measuring temperature change and molten pool shape at the bead-on-plate weldment. With heat input model developed, the effect of the tension load on the amount of welding distortion at the STS 304 multi-pass butt weldment was evaluated using the thermo-elasto-plastic FE analysis. In accordance with FEA results, the angular distortion and transverse shrinkage sharply decreased with an increase in tension load. This result indicates that tensioning method was verified as a countermeasure against the welding distortion of STS 304 multi-pass butt weldment.

• The Journal of Korean Physical Therapy
• /
• v.33 no.5
• /
• pp.224-230
• /
• 2021

Purpose: The purpose of this study was to investigate the effects of the fascia distortion model (FDM), one of the fascia treatments, on unstable ankle subjects. This was done through the chronic ankle instability tool (CAIT) questionnaire on maximum isometric muscle strength, proprioception, dynamic balance, and maximum angle. Methods: An experiment was conducted using the chronic ankle instability tool questionnaire on males and females in their twenties who suffered from ankle instability. Before the experiment, maximum isometric strength, proprioceptive, dynamic balance, and maximum angle were measured. The fascia distortion model was applied and then measurements were taken again to compare and analyze the changes. Analysis was carried out using the paired t-test. Results: After applying the fascia distortion model, maximum isometric strength, proprioceptive, dynamic balance, and maximum angle significantly improved (p<0.05). Conclusion: This study found that the fascia distortion model method was effective in improving maximum isometric strength, proprioceptive, dynamic balance, and maximum angle. The results suggest that the fascia distortion model method is a new intervention that could be used for subjects with chronic ankle instability.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.4
• /
• pp.347-354
• /
• 2022

The synthetic aperture radar(SAR) is an equipment that can acquire images in all weathers day and night based on radar signals. The on-board processor of satellite SAR generates transmission signal by digital signal processing, converts it into an analog signal and transmits to antenna. Until the transmission signal generated by on-board processor is output, the signal passes the transmission cables and analog devices. At this time, these hardware distort the signal and makes SAR performance worse. To improve the performance, pre-distortion technique is used. But, general pre-distortion using taylor series is not sufficient to compensate for the distortion. This paper suggests transmit signal design method with improved pre-distortion. This paper uses envelop sampling method and interpolation filter for frequency domain compensation. The proposed method accurately compensates the hardware distortion and reduces resource usage of FPGA. To analyze proposed method's performance, IRF characteristics are compared when the proposed method applies to signal with errors.

• Korean Journal of Optics and Photonics
• /
• v.34 no.2
• /
• pp.61-65
• /
• 2023

This paper studies a method of applying pre-distortion to the image mask of the gobo illumination optical system to correct an irradiated image and irradiate a clear image. In the case of the gobo illumination optical system, since it is generally irradiated with a tilt, distortion in the upper and lower directions occurs severely in the image. To solve this problem, the correction coordinates of the image were derived using a proportional equation, and the distortion was corrected by applying them to the image mask. As a result, it was confirmed that the distortion was reduced by 64.5% compared to the case of using the existing image mask.