• Journal of Welding and Joining
• /
• 제15권4호
• /
• pp.63-69
• /
• 1997

Welding distortion is more serious problem than any other problems caused by welding process, especially, in the heavy-industrial place. These welding distortions are caused by nonuniform heating and cooling of metal during and after welding operations. And these distortion quantities are must be known to worker in production line because distorions are important role in assembling part. Therefore an analytical model to explain and predict the welding distortion are needed. A numerical analysis of welding distortion which is inelastic behavior of weldment would require the three dimensional calculation. But computing time and memory would be very large, and the resulting cost might be unacceptable. Therefore we use a numerical technique for two dimensional analysis in the section normal to the weld direction of weldment under an assumption of quasi-stationary conditions. But the result of the calculation under two dimensional(plane strain) assumption was not satisfied as compared with experimental result. This paper proposed a technique for analysing the welding angular distortion by using a constraint boundary condition on the two dimensional finite element model. The simulation results revealed that the constraint boundary model could more reasonably describe the welding distortion than the plane strain model did.

• International Journal of Costume and Fashion
• /
• 제11권2호
• /
• pp.37-52
• /
• 2011

The purpose of this thesis is to study how Physical Distortion has been developed on the fashion from a surrealistic point of view and how it could be contributed to development of clothing design. This body distortion phenomenon has been started from primitivism times and it is still going on with various ways. Each era's distortion has been changed due to social cultural and environment matters. Especially influences of surrealism on the 20th century art transcended the limit of thought. Since appearance of surrealism 21th century fashion design has been opened up for new possibilities. There are no stereotypes no boundaries and our society is getting increasingly diversified. People in those society is longing to have another esthetic requirements. Also surrealistic physical distortion in the contemporary fashion has been produced unique design with new technology and new material. Physical distortion in fashion possess an infinite possibilities that could concoct the most amazing clothes. Also it has another strong potential that conducting us the way to produce design in novel ways. There is no doubt that surrealistic physical distortion in the contemporary fashion is absolute necessity to continue on evolution of clothing design.

• Journal of Welding and Joining
• /
• 제25권1호
• /
• pp.49-56
• /
• 2007

Prediction and control of the thermal distortion is particularly important for the design and manufacture of welded thin plate panel. In this study, experiments and computations are performed to analyze effect of a hole configuration and a specimen size on distortion. In addition, this study aims to develop a thermal elasto-plastic simulation using finite element method to predict distortion, with particular emphasis on buckling deformation generated in plates welded around hole. From the experiments, the severe distortion appeared in the weldments by the laser welding process, in which the specimen size plays an important role on the distortion but the hole configuration showed little effect. And the results of numerical analysis were corresponded well with the experiment ones. Thus, a thermal elasto-plastic analysis model for predicting the weld distortion of thin plate panel was successfully developed through this study.

• 대한기계학회논문집A
• /
• 제29권10호
• /
• pp.1377-1383
• /
• 2005

A general and efficient methodology has been developed to analyze dimensional variations of an assembly, taking into account of weld distortion. Weld distortion is generally probabilistic because of the random nature of welding parameters such as the welding speed, maximum welding temperature, ambient temperature, etc. The methodology is illustrated through a very simple example of two perpendicular plates fillet-welded to each other. Two steps comprise the methodology: establishment of a weld-distortion database, and tolerance analysis using the database. To establish the database, thermo-elasto-plastic finite element analyses are conducted to compute the weld distortion for all combinations of discrete values of major welding parameters. In the second step of tolerance analysis, the weld distortion retrieved from the database is used in addition to the dimensional tolerances of the parts. As a result of such an analysis, sensitivities of the assembly's dimensional variations to the part tolerances and weld distortion are obtained, which can be help improve the dimensional quality of the assembly.

• 한국항공우주학회지
• /
• 제35권9호
• /
• pp.761-770
• /
• 2007

본 연구에서는 압력 왜곡과 유동각 왜곡을 모사하기 위하여 삼각날개를 이용한 와류 발생장치를 설계하였다. 삼각날개는 목표한 와류코어 위치와 압력왜곡율(DC90), 와류각을 만족하기 위해 후퇴각 $65^{\circ}$를 사용하였으며, 와류의 분포 영역을 넓히기 위해 삼각날개 전단면에 $45^{\circ}$ 와동 플랩을 적용하였다. 제작된 와류 발생장치는 시뮬레이션 덕트를 적용한 유동 왜곡 시험에서 전압력 왜곡율의 설계 요구조건을 만족하였으며, 시험 결과로부터 검증된 전산유체해석 결과를 이용하여 와류코어 위치와 와류각의 목표 성능을 확인하였다.

• 한국인터넷방송통신학회논문지
• /
• 제18권4호
• /
• pp.49-53
• /
• 2018

파라볼라 오프셋 안테나는 여러 통신 신호 송수신을 위하여 사용된다. 파라볼라 오프셋 안테나의 기본적인 구조는 급전혼을 지지하기 위한 지지대 및 RF 장치들이 파라볼라 안테나 하단에 위치한다. 하지만 지지대 및 RF 장치들로 인하여 안테나 이득 패턴 상에서 부엽이 증가하게 된다. 지지대 및 RF 장치와 같은 부속 장치의 위치에 따라서 부엽 왜곡이 일어나는 각도가 달라진다. 본 논문에서는 이를 광선 추적 기법을 이용하여, 이득 패턴 부엽 왜곡 증가하지 않는 회피 구역을 지정하는 방법을 소개한다. 광선 추적 기법을 이용해 회피구역에 대한 벡터를 생성하며, 생성한 벡터를 이용하여 3D로 이루어진 구역을 지정한다. 또한 회피 구역 내에 부속 장치가 존재할 때와 아니할 때를 시뮬레이션을 통하여 비교한다. 이러한 비교를 통하여 부엽에 대한 목표 각도를 설정한 뒤 목표 각도 이내의 부엽을 조절할 수 있는 방법을 소개한다.

• 한국측량학회지
• /
• 제7권2호
• /
• pp.45-51
• /
• 1989

랜즈왜곡은 상의 위치를 변화시키므로 이에 대한 보정은 사진측량의 정확도 향상에 중요한 의미를 지니고 있다. 본 연구는 기준점 성과와 space resection의 과정없이 단사진으로 보정계수 결정이 가능한 plumb line method를 이용하여 거리에 따른 측정용, 비측정용 카메라의 렌즈왜곡 보정계수를 구하고 이를 실제 피사체의 3차원 위치해석에 적용, 정확도 향상을 기하고자 함에 목적이 있다. 그 결과, 측정용 카메라는 큰 차이를 보이지 않으나 비측정용 카메라는 방사방향, 접선방향 왜곡 보정계수가 촬영거리에 따라 면하므로 촬영거리에 따른 보정계수 적용이 바람직하며, 비측정용 카메라에 이를 적용하였을 경우 오차가 약 30%∼76%까지 현저히 감소되었다.

• 한국해양공학회지
• /
• 제33권2호
• /
• pp.153-160
• /
• 2019

Welding often results in welding distortion during the assembly process. The welding distortion of thin-plate structures such as the living quarters of ships and offshore installations is a more significant problem than in the case of thick-plate structures. Pre-stressing/heating and fairing, which are additional works to mitigate and control welding distortion, are inevitable, and the construction planning is accordingly delayed. In order to prevent welding distortion and minimize the additional work during the assembly process, increasing the plate thickness and/or the number of stiffeners may be a simple solution, but it may give rise to problems related to cost and weight. In this study, the welding distortion control effect of the type of stiffeners on the door openings of various living quarter structures was investigated using an experimental method and a finite element method. The results showed the feasibility of mitigating and controlling the welding distortion, and the optimum selection of the type of stiffeners was confirmed.

• 전자공학회논문지
• /
• 제50권6호
• /
• pp.131-137
• /
• 2013

광각 카메라는 단 초점 렌즈를 장착하여 넓은 시야의 이미지를 처리하는데, 렌즈의 광학 문제로 인해 이미지에 베럴 왜곡(barrel distortion)이 발생한다. 본 논문에서는 베럴 왜곡을 실시간 디지털 신호처리를 통해 보정하기 위한 낮은 복잡도의 프로세서 구조를 제시하고 이를 실제 구현하여 유효성을 검증하였다. 제안하는 왜곡 보정 프로세서는 하드웨어 복잡도를 낮추기 위해서, 좌표 위치 보정에 필요한 계산을 점증적(incremental)으로 수행한다. 또한, 높은 보정 속도를 달성하기 위해 파이프 라인 구조로 설계하였다. 설계된 보정 프로세서는 $0.11{\mu}m$ complementary metal-oxide semiconductor(CMOS) 공정을 사용하여 14.3K의 논리 게이트로 구현되었다. $2048{\times}2048$ 픽셀 영상에 대하여, 최대 314MHz의 동작 주파수로 초당 74.86번의 속도로 보정이 가능하다.

• 전력전자학회논문지
• /
• 제18권2호
• /
• pp.161-168
• /
• 2013

This paper presents an algorithm of a compensation of the grid current distortion caused by the grid voltage unbalance and distortion in 3-phase bi-directional DC to AC inverter. Usually 3-phase grid system has unbalance and distortion because of connecting 1-phase and non-linear load with 3-phase load using same input node. Controlling 3-phase inverter by general method under the unbalanced and distorted grid voltage, the grid current has distortion. This distortion of the grid current cause the grid voltage distortion again. So, it need to control the grid current balanced and non-distorted, even the grid voltage gets unbalanced and distorted. There are some complex method to compensate the gird current distortion. it suggest simple method to solve the problem. Simulation and experiment is used to validate the proposed algorithm.