• 한국지반신소재학회논문집
• /
• 제1권1호
• /
• pp.43-51
• /
• 2002

본 연구에서는 차수재의 차수성를 결정짓는 벤토나이트 팽윤재를 이용하여 증류수, 침출수, 바닷물 및 3% NaCl 용액등의 반응물에 대한 자유팽윤도를 측정하였으며 Poly(acrylic acid)와 PVA(polyvinyl Alcohol), SCMC(Sodium Carboxymethyl Cellulose)를 각각 첨가한 벤토나이트의 자유팽윤도의 변화를 비교 평가하였다. 또한 바닷물에서의 토목섬유점토차수재의 투수계수를 측정하였으며 바닷물이 차수성에 어떤 영향을 미치는지 확인하였다. 벤토나이트의 평균 자유팽윤도는 증류수>침출수>바닷물 순으로 감소하였다. 바닷물에서와 3% NaCl 용액에서의 자유팽윤도 값은 근소한 차이를 보였다. Poly(acrylic acid)가 첨가된 벤토나이트는 모든 반응물에서 팽윤성 향상을 나타내었고 PYA가 첨가된 벤토나이트는 증류수를 제외한 반응물에서는 팽윤성 향상을 보이지 않았다. SCMC가 첨가된 벤토나이트의 팽윤성은 3% NaCl 용액에서 다소 자유팽윤도가 떨어지나 전반적으로 팽윤성이 향상되었다.

• Restorative Dentistry and Endodontics
• /
• 제17권1호
• /
• pp.95-103
• /
• 1992

The purpose of this study was to evaluate the effect of the dentin pretreatment on the marginal leakage of a glassionomer cement. 1n this study, 60 molars with sound and healthy crown portion were used. The dentin surface of these teeth were exposed and polished with 600 grit silicon carbide paper. Square - shaped cavities were prepared on the flattened dentin surfaces and these were divided into 4 groups according to the dentin pretreatment procedures. Group I : Dentin pretreatment with distilled water as a control group. Group II : Dentin pretreatment with 5% sodium hypochlorite solution. Group III : Dentin pretreatment with Ketac conditioner. Group IV : Dentin pretreatment with 40% polyacrylic acid. The degrees of dye penetration in the cavity walls were assessed using a stereoscope at ${\times}40$ magnification according to the maximum dye penetration. The results were analyzed by using Mann - Whitney U test. The results were as follows : 1. All groups showed varying depth of dye penetration. 2. Distilled water group showed the most severe marginal leakage when compared with the other groups(P<0.05). 3. 40% polyacrylic acid group showed the least amount of marginal leakage compared with the other groups (P<0.05). 4. There were significant differences between Goup I(distilled water) and Group IV (40% polyacrylic acid)(P<0.05), but there were no significant differences among Group I(distilled water), Group II(sodium hypochlorite), Group III(Ketac conditioner) (P>0.05).

• 조명전기설비학회논문지
• /
• 제18권2호
• /
• pp.44-48
• /
• 2004

수표면을 전극으로 사용한 무성방전형 오존발생기를 제안하고 수중의 전도도 변화가 수표면 방전에 미치는 영향을 실험적으로 조사하였다. 수표면 방전에 중요한 영향을 줄 수 있는 요소로 방전공간내의 이온과 수중의 이온 및 극성분자등이 있다. 본 연구에서는 전도도를 변화시켜 수중에 존재하는 이온의 수를 조절함으로써 방전특성을 변화시키고자 하였다. 이를 위해 증류수내에 각각 다른양의 NaCl을 투입함으로써 전도도를 변화시켰고 이때의 전류-전압특성과 오존발생특성을 비교 조사하였다. 결과적으로 순수한 증류수를 사용한 경우보다 NaCl을 투입한 경우 안정된 방전을 발생시킬 수 있었고 투입하는 NaCl의 양을 늘여감에 따라 방전개시전압을 낮출 수 있었다.

• 한국의류학회지
• /
• 제42권2호
• /
• pp.269-277
• /
• 2018

This study extracted Artemisia capillaris Thunberg with distilled water and ethanol to investigate its antioxidant effect. We then investigated the possibility of producing nanofibers by an electrospinning process by adding the extracts to polyvinyl alcohol (PVA). The electrospinning method used a PVA concentration of 12wt.%, an applied voltage of 10kV, and a tip-to-collector distance of 15cm. Total polyphenol and total flavonoid contents were measured to verify the antioxidant activity of Artemisia capillaris Thunberg extracts (ACEs). The total polyphenol content of the distilled water extract and the ethanol extract were measured as 218.47 and 271.26mg/g, respectively, and the total flavonoid content of the distilled water extract and the ethanol extract were measured as 141.68 and 34.98mg/g, respectively. As the content of the ACEs in the PVA nanofibers increased, the Diameters of the nanofibers and the uniformity of the diameters decreased. The electrospinning process was fabricated in a relatively uniform form without beads, and the diameters of the nanofibers that were produced ranged from 340 to 390nm. The results of FT-IR, XRD and DSC analyses confirmed that the ACEs were well mixed with the PVA molecules and were electrospun.

• 대한의생명과학회지
• /
• 제23권4호
• /
• pp.388-394
• /
• 2017

Recently, coffee is the most popular beverage for modern people. A great number of substances are found in coffee beans and have been studied for many years such as aliphatic and aromatic compounds. However, studies on the physiological activity of coffee extracts are insufficient. This study was performed to determine the contents of caffeine and chlorogenic acid in coffee extracts according to the solvent and to investigate the physiological activity of coffee extracts. Coffee extracts were extracted by ultrasonication method with various types of solvents including distilled water, ethanol, and other organic solvents under $50^{\circ}C$ and $80^{\circ}C$. The contents of caffeine and chlorogenic acid in coffee extracts were determined by Liquid Chromatography-Mass Spectrometry (LC-MS). Also, cytotoxic and antioxidative effects of coffee extracts were evaluated with MTT and DPPH assays to analyze the physiological activity. As a result, it was confirmed that caffeine and chlorogenic acid contents were extracted in distilled water with the highest rate. Antioxidative activity was observed below 10-fold dilute of coffee extracts, however cytotoxicity was not observed. In conclusion, distilled water was the best solvent for extracting caffeine and chlorogenic acids from coffee bean with ultrasonication and these coffee extracts are less cytotoxic in human skin cell lines and have antioxidant effect.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.171-176
• /
• 2004

Electro chemical corrosion tests were conducted on two structural steels, SS400 and SM490A, in various solutions with different pH values, All materials showed typical active corrosion behaviors in the solutions, and corrosion potential and current density were measured from the slopes obtained from the Tafel curves using linear polarization method. Corrosion potential increased in the acidic region and then decreased depending on the pH values of the solutions. All materials showed the fast corrosion rate in artificial acid rain(pH=4.7), but the slower corrosion rate was observed in NaOH solution(pH=12.0) for SS400 and in distilled water(pH=7.0) for SM490A, respectively, which is thought to come from the difference in chemical composition of two alloys. Generally homogeneous corrosion occurred in acid rain condition, and almost no corrosion was observed in distilled water in both alloys. NaOH solution produced more corrosion than distilled water, and more corrosion had progressed in SS400 than in SM490A in $3.5\%$ NaCl solution.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.732-737
• /
• 2000

The purpose of this study is to compare the SMD(Sauter mean diameter) with different vibrant plates. Each vibrant plates have different surface roughness. Also liquid film thickness are measured for explanation how to concern atomization. Ultrasonic waves is used for vibration. Immersion liquid method is used for the measure of SMD and also liquid film thickness is measured using of point needle method. Distilled water and gasoline fuel are used to liquids. Supplied liquid flow rates are $18{\sim}296cc/min$. Centerline average roughness of vibrant plates are 0.5, 2.0, 4.7, $9.5\;{\mu}m$ and diameter of vibrant plate is 60mm. In result, good atomization of liquid is obtained in widen flow rates. The mean droplet size is increased in orders of 4.7, 2.0. 9.5, $0.5\;{\mu}m$ surface roughness. Distilled water has a big mean droplet size than gasoline fuel in low flow rate. Above the 78cc/min flow rates, distilled water has a small mean droplet size than gasoline fuel. Liquid films changes are measured with ultrasonic power. Also, cavitation effect on sprays is observed.

• 대한기계학회논문집A
• /
• 제24권7호
• /
• pp.1841-1846
• /
• 2000

To examine the effect of acid fog on the corrosion fatigue behavior in structural steel, fatigue tests under acid fog atmosphere were carried out in comparison with distilled water. The corrosive c omponents contained in acid fog pile up the corrosion products on crack face and show a crack branching and crack tip blunting. Therefore, due to these workings crack growth rate was reduced by decreasing the effective stress range in crack tip rather than under distilled water. Also the effect of sulfuric acid, which is the main component of acid fog, and testing speed on fatigue crack growth were examined. It was found that corrosion behavior was remarkably dependent upon pH and Hz rather than components of acid fog. According as pH and testing speed decrease below a specific value, crack growth was accelerated in comparison with distilled water. This reveals that due to liquid having strong acidity and slow speed of test the crack face dissolution was promoted, so crack closure was disturbed in the process of stress descent.

• 생약학회지
• /
• 제47권1호
• /
• pp.18-23
• /
• 2016

This study was conducted to investigate the tyrosinase inhibitory and melanin production inhibitory activity of the distilled water extract of Dendropanax morbifera leaf (DMW) and the fermented extract by Lactobacillus plantarum (DMF). DMF was prepared by inoculation of L. plantarum after the extraction procedure with distilled water. Fermentation for 48 hours at $37^{\circ}C$ is the most effective condition in this study. In DPPH radical scavenging ability, $SC_{50}$ values of the fermented DMF was $37.9{\mu}g/ml$ as a result of more effective than DMW extract ($52.6{\mu}g/ml$). Moreover, tyrosinase inhibitory activity of DMF showed higher activity than DMW. In nontoxic concentration range, DMF showed strong melanin production inhibitory effect in ${\alpha}$-melanocyte stimulating hormone-stimulated B16F10 cell. As a result, the fermentation of the distilled water extract of D. morbifera leaf by L. plantarum could be applicable to functional materials production for skin-whitening agents.

• 한국염색가공학회지
• /
• 제25권4호
• /
• pp.327-336
• /
• 2013

The purpose of this study was to evaluate the color image of the natural-dyed silk fabrics. The dye was extracted from pine needle by boiling pine needle with ethanol at $78^{\circ}C$ for 3hours and distilled water at $100^{\circ}C$ for 2hours. The 100% silk fabric was dyed of extract in pH 5 at $90-100^{\circ}C$ for 1 hr. As mordants used were compounds of Al, Sn, Fe, and Cr, color image of pine-needle dyed silk fabrics was classified into 5 factors (pure, gentle, sophisticate, comfortable, pastorale) and the factor pure is most important one of those. Most cheerful image in pure factor was from the fabrics dyed with ethanol extract and then, none and Cr mordanting. Dignified image was from the fabrics dyed with ethanol extract and then, Cu or Fe mordanting. In production, products dyed with ethanol extracts was preferred to those dyed with distilled water extracts. Color image and preference of the silk fabrics dyed with pine needles extracted was affected by extraction solvents and mordants.