• Advances in materials Research
• /
• v.9 no.2
• /
• pp.109-114
• /
• 2020

The purpose of this study was to observe the trend of compounds release from acrylic resin oral prosthesis when used for drug delivery as well as a restoration. In this study, 10 specimens of heat-cured polymethylmethacrylate material were prepared and loaded with methylene blue biological stain. The specimens were then submerged in vials with 5 ml distilled water for 24 hours. The extraction procedure continued for 4 days, each day the specimens were immersed in another 5 ml distilled water vial. All extracted solutions were analyzed by visible light spectroscopy for absorbance comparison. The statistical results showed that the absorbance values were significantly different in the first day of extraction than the following days. However, there was no statistical difference among the 2^nd, 3^rd and 4^th days of extraction. Biological stain loading to acrylic resin at the mixing stage, and then after extraction in distilled water, showed a burst release during the first day followed by a constant release during the following few days.

• Korean Journal of Agricultural Science
• /
• v.49 no.3
• /
• pp.389-396
• /
• 2022

The purpose of this study was to investigate the safety of Houttuynia cordata Thunb extract (HCE) in Institute of Cancer Research (ICR) mice, to determine the effects of the extract on the growth performance and colony count, and to establish the optimal concentration of HCE. In total, 60 five-week-old male ICR mice with an average initial body weight (BW) of 27.24 ± 0.44 g were used in a four-week experiment. Mice were randomly allotted to four treatment groups (five replications per group, three mice per cage): 1) a control (CON) group fed with normal distilled water; 2) treatment group 1 (T1) fed with normal distilled water containing 0.05% HCE; 3) treatment group 3 (T3) fed with normal distilled water containing 0.1% HCE; and 4) treatment group 3 (T3) fed with normal distilled water containing 0.2% HCE. BW, feed intake (FI), and water intake were measured on the first, fourteenth, and eighteenth days. T2 showed a significant improvement (p < 0.05) in the feed conversion ratio (FCR) over the experimental period. However, water intake levels did not show significant differences among the groups. In the large intestine and feces, E. coli and Lactobacillus levels were significantly improved (p < 0.05) in the HCE treated group compared to the CON group. Supplying HCE via the drinking water improved the growth performance and colony count in ICR mice. Based on results of this study, utilizing HCE in livestock species is expected to be safe and feasible.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.6
• /
• pp.948-955
• /
• 1995

To investigate the antimicrobial activities of mustard seed(Brassica juncea), a series of solbents were examined for extraction of antimicrobial substances from mustard seed and then antimicrobial substances were identified by simultaneous distillation extraction(SDE) and GC-MS methods. Water and methanol extracts of mustard seed showed antimicrobial activitries against experimental strains while those from hexane extract almost was not observed. The distilled components of mustard seed by SDE method showed strong antimicrobial activities, methanol extract of residues fraction exhibited a little, and water layer with the exception of distilled components showed no antimicrobiol activities. The 30 varieties of distilled components including 3 types of isothiocyanate such as 3-isothiocyanate-1-propene, 4-isothiocyanate-1-butene, and 3-isothiocyanatoethyl benzene were identified from mustard seed.

• Journal of the East Asian Society of Dietary Life
• /
• v.17 no.3
• /
• pp.384-392
• /
• 2007

The primary objective of this study was to determine the effects of a water-distilled extract with 15 kinds of Korean medicinal herb on antioxidant activity, antimicrobial activity against Helicobacter pylori, and lipid metabolism. The water-distilled extract (WE) and fermenting water-distilled extract (FE) of medicinal herbs were utilized in order to make functional beverages. The EDA (electron donating activity), SOD-like ability, and RAE (relative antioxidant efficacy) of WE averaged 24.47, 50.35, and 1.57%, respectively, but the EDA, SOD-like ability, and RAE of FE was retardeded by 12.01, 35.72, and 1.55%, respectively. The antimicrobial activity against Helicobacter pylori of WE averaged 12.84 mm as a diametric clear zone, and was significantly (p<0.05) higher than those measured in the WE and control. Serum triglyceride contents, total serum cholesterol contents, and serum LDL-cholesterol contents of the WE group were significantly (p<0.05) lower than those of the control group. The liver total-cholesterol contents and liver triglycerides of WE group were significantly (p<0.05) lower than those of the control group. The plasma TBARS value of the WE group was significantly (p<0.05) lower than that of the control group. The sensory evaluation, taste, and smell of FE were more desirable than those of WE, but the color of WE was more desirable. According to the above results, the water distilled extracts (WE) of 15 kinds of medicinal herb are supposed to be effective with regard to antioxidant activity and lipid metabolism, but the antimicrobial activity against Helicobacter pylori was increased as the result of fermentation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.3
• /
• pp.363-371
• /
• 2003

This study is mainly concerned with phenomenon of cavitation-erosion on the several materials and corrosive liquids which were applied with vibrator(suggested by ASTM G 32, 20KHz, 50$mu extrm{m}$). The maximum erosion rate by cavitation erosion in both of distilled water and sea water appeared to be proportioned to their hardness and tensile strength. Cavitation weight loss and rate of cast iron in sea water condition were greater(approximately 3 times) than that in distilled water condition, however in case of stainless steel and brass the cavitation weight loss of composite materials were not so different in both of their conditions. Cavitation weight loss of composite materials were shown as below on this test, Duratough DL : Weight loss in sea-water condition were greater (approximately 2.3 times) than it's distilled water condition. The main tendency of cavitation erosion for metals appeared that small damaged holes causing by cavitation erosion was observed with radial pattern. On the other hand, the tendency for composites appeared that small damaged holes were observed randomly.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.5
• /
• pp.465-472
• /
• 1994

To improve the germination performance of rice seeds under suboptimal temperature, osmopriming with PEG-6000 was examined. Optimal PEG-6000 concentration to improve germination was 20% PEG-6000 solution, and rice cultivars used in this experiment were Sinunbongbyeo, Gancheokbyeo, Dongjinbyeo. The water content of seeds after soaking for 60 hours in the PEG solution is similar to that of seeds after soaking for 24 hours in the distilled water. Germination performance of the soaked seeds in the PEG solution was higher than that of the soaked seeds in the distilled water or the control, especially under suboptimal temperatures. Electrical conductivity of the soaked seeds in the PEG solution was lower than that of the soaked seeds in the distilled water or the control, and total dehydrogenase activity of the soaked seeds in the PEG solution was higher than that of the soaked seeds in the distilled water or the control. SDS-PAGE results of soluble protein from the embryos of seeds primed differently showed darker band in the seeds soaked in the PEG solution than the seeds soaked in the distilled water or the control at the 68 KD region. Also, band patterns of peroxidase and esterase of embryos soaked in the PEG solution were darked than that of embryos soaked in the distilled water or the control at the Rf 0.94 and Rf 0.87, respectively.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.379-390
• /
• 1998

In endodontic treatment, calcium hydroxide has been used as intracanal medicament. Although calcium hydroxide should be removed thoroughly before permanent root canal filling, no effective method for its removal has been reported. Because of irregularity of root canal walls, root curvatures and anatomic variations, it is insufficient to remove calcium hydroxide from the canal wall only by mechanical instrumentation Considering the chemical effects of irrigants on calcium hydroxide, $Ca^{++}$ dissolving effect from two calcium hydroxide products is investigated, using dis- tilled water, NaOCl, citric acid and EDTA. Vitapex$^{(R)}$ 0.1g and calcium hydroxide 0.03g were dissolved in distilled water, 5% NaOCl, 50% citric acid and 17% EDTA respectively, at 1, 3, 5, 10min. time interval. The solution was filtered using filter paper(pore size $5{\mu}m$) and $Ca^{++}$ concentration was determined by ion chromatography. The result were as follows : 1. Distilled water, NaOCl, citric acid and EDTA abstracted more $Ca^{++}$ from calcium hydroxide than Vitapex$^{(R)}$ except NaOCl 1, 5, 10 time interval. 2. EDTA and citric acid abstracted more $Ca^{++}$ from Vitapex$^{(R)}$ and calcium hydroxide than distilled water or NaOCl. The overall result support the view that water-based calcium hydroxide product is easily removed than oil-based calcium hydroxide product and EDTA, citric acid are more effective in $Ca^{++}$ elution than NaOCl or distilled water.

• Restorative Dentistry and Endodontics
• /
• v.17 no.1
• /
• pp.104-114
• /
• 1992

The purpose of this study was to evaluate the shear bond strength of glass ionomer cement(Ketacfil, ESPE, Co.) against dentin surface which had been treated with surface conditioning agents(distilled water, 5% sodium hypochlorite solution, Ketac - conditioner, 40% polyacrylic acid). In this study, 60 human molars with sound and healthy crown portion which were previously extracted for orthodontic or periodontal problem. The dentin surfaces of these teeth were exposed with wet trimmer and polished with 150 - grit and 600 - grit silicon carbide paper and the teeth were divided into four groups(15 teeth per group) according to the following surface conditioning methods. Group I : Surface treatment with distilled water as control group. Group II : Surface conditioning with 5% sodium hypochlorite solution. Group III : Surface conditioning with Ketac conditioner. Group IV : Surface conditioning with 40% polyacrylic acid. The shear bond strengths were measured by Autograph(Shimatzu Co. Japan). The result of the evaluations were then subjected to statistical analysis using one - way analysis of variance and Duncan test and the results were as follows : 1. The shear bond strength accrding to the dentin surface conditioning conditions was highest in Ketac conditioner group, with measurements of $44.44{\pm}0.74(kg/cm^2)$ and lowest in the distilled water group, with measurements of $28.84{\pm}0.88(kg/cm^2)$. 2. Statistically significant differences were found between surface conditioning with 5% sodium hypochlorite solution group or Ketac conditioner group and distilled water group(P<0.01). 3. Also, statistically significant difference was found between surface conditioning with distilled water group and 40% polyacrylic acid group(P<0.05). 4. Overall difference in statistical significance between the groups was not found (P<0.05). 5. Fractured dentin surface treated with conditioning solutions showed cohesive fracture. 6. Distilled water group and 5% sodium hypochlorite solution group removed the smear layer less effectively. 7. Conditioning dentin with Ketac conditioner and 40% polyacrylic acid resulted in the removal of a significant amount of the smear layer without removing the tubular plugs and dissolving the peritubular dentin.

• Composites Research
• /
• v.26 no.3
• /
• pp.165-169
• /
• 2013

This work presents the tensile properties and water uptake behavior of plasma treated abaca fibers reinforced epoxy composites. The composites were prepared by vacuum assisted resin transfer molding. The effects of treatment on tensile properties and sorption characteristics of abaca fiber composites in distilled water and salt solution at room temperature were investigated. The tensile strength of the composites increased with plasma treatment. With plasma treatment, an improvement of 92.9% was obtained in 2.5 min exposure time in plasma. This is attributed to high fiber-matrix compatibility. Less improvement on tensile properties of hybrid treatment of sodium hydroxide and plasma was obtained. However, both treatments reduced overall water uptake in distilled water and salt solution. Hydrophilicity of the fibers decreased upon plasma and sodium hydroxide treatment, which decreases water uptake.

• Food Science and Preservation
• /
• v.10 no.3
• /
• pp.326-332
• /
• 2003

Deep seawater is pumped up about 200 m water depth, which has characteristics of rich nutrients, low temperature and cleanness. This study was performed to investigate the effect of deep seawater and deep seawater salt on the yeast growth of fermented bread. The rate of increase in volume of groups added with deep seawater and deep seawater salt was higher than that of groups added with distilled water. The pore pattern of groups added with deep seawater was more regular than that of groups added with distilled water. In sensory property, the bread added with distilled water and deep seawater salt has the highest score (6.56) in overall acceptability.