• 한국가스학회지
• /
• 제25권5호
• /
• pp.52-56
• /
• 2021

친환경적인 환경과 자동차산업의 발달로 내연기관자동차에서 완전연소를 통해 열효율을 높이고 배기가스를 점감하기 위한 연구를 활발하게 진행하고 있다. 특히 휘발유의 휘발성과 연소특성에 대한 이해로 엔진의 부하와 출력을 높이기 위한 연구가 진행되고, 경유 연료의 증류 및 연소특성을 토대로 매연이나 유해가스 저감과 최적의 효율을 구현하기 위한 연구가 진행 중이다. 따라서 본 연구에서는 한국 산업규격의 석유제품 증류시험방법에 대한 KS M ISO 3045의 내용을 토대로 국내에서 시판되고 사용되는 정유사 4사의 휘발유와 경유를 기반으로 증류실험을 진행하였다. 증류실험으로 증류량에 따른 증류온도와의 상관관계를 확인하고 증류된 연료의 비교를 통해 증류특성에 대한 분석을 실시하여 시험기준에 부합하는지에 대한 적합성을 확인하였다.

• 멤브레인
• /
• 제13권3호
• /
• pp.154-161
• /
• 2003

본 연구에서는 소수성 PTFE (Polytetrafluoroethylene) 분리막의 산소동위원소 분리특성을 확인하기 위해 물의 온도에 따른 수증기의 막 투과특성을 Air Cap Membrane Distillation (AGMD)과 Vacuum Enhanced Membrane Distillation (VEMD) 방법을 이용하여 각각 측정하였다. 투과된 수증기는 트랩에서 수거하여 투과플럭스 (permeation flux)를 측정하였고$ H_2^{16}O$와 $H_2^{18}O$의 성분비는 다이오드 레이저 흡수분광법을 이용하여 측정하였다. 분리막을 투과한 수증기에서 무거운 산소동위원소의 성분비가 감소함을 확인하였고 분리계수는 실험 조건에 따라 1.004~1.01로 측정되었다. 또한 분리막의 기공에 있는 공기가 산소동위원소의 분리에 미치는 영향을 확인하였고 기공내 공기가 없을 때 동위원소 분리계수가 증가함을 관찰하였다.

• 동력기계공학회지
• /
• 제18권5호
• /
• pp.11-15
• /
• 2014

Currently, there are active researches being conducted on a new combustion technology that can reduce emission quantity while enhancing vehicle performance as well as Improving fuel quality. In a gasoline engine that uses petroleum, high volatility makes it easy to jump spark ignition and prevent knocking phenomenon that occurs inside an engine. In a diesel engine that uses diesel fuel, high volatility reduces combustion residues and toxic gas and is therefore good for protecting the environment. Therefore, for fuel used in a vehicle, volatility is an important factor that influences not only engine performance but also environmental protection. This research conducted a distillation experiment using gasoline and diesel fuel for vehicles produced by domestic oil companies. The test was conducted in accordance with the method of distillation experiment described in KS M ISO3405. In addition, it used the result of analysis from the experiment to examine visual distillation characteristics of each fuel and developed a formula based on distillation temperature.

• 한국자동차공학회논문집
• /
• 제5권2호
• /
• pp.42-49
• /
• 1997

This experimental study was performed to find fuel property variations of the ultrasonic energy adding gasoline and improve the spray characteristics of the multipoint injector for EFI engine. The cause and effect of the characteristic improvement of the ultrasonic energy adding fuel was found out by the chemical structure analysis (NMR, IR), distillation and viscosity test. The results are obtained that the chemical property of gasoline organizition was changed aromatics to paraffins and branch index as the physical characteristics of gasoline were improved by ultrasonic energy. There were higher distillation and lower viscosity in ultrasonic energy adding gasoline.

• KSBB Journal
• /
• 제14권2호
• /
• pp.220-224
• /
• 1999

본 논문에서 회분식 반응 증류에 의한 lactic acid의 분리 특성을 연구하였다. 휘발성이 있는 lactate ester의 생성을 위한 lactic acid와 alcholo과의 반응에서, 반응에 의해 생성된 lactate ester의 휘발성이 높을 수록 증류탑으로 들어가는 lactate ester양은 증가하여 재비기에서 얻어진 lactic acid의 회수율은 증가 하였다. 부분응축기의 온도가 감소할수록 재비기로 모이는 lactate ester양은 증가하였고 재비기 내의 수화 반응에 의해 얻어지는 lactic acid의 양은 증가하였다 Lactic acid의 정제를 위한 lactate ester와 물과의 수화 반응은, 비록 증류탑 내에서 lactate ester와 물이 반응을 할 수 있으나, 증류탑 내에서의 체류시간이 짧기 때문에 대부분 재비기에서 이루어진다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.234-239
• /
• 1990

A neural controller for process control was proposed that combines a simple feedback controller with a neural network. This control was applied to distillation control. The feedback error learning technique was used for on-line learning. Important characteristics on neural controller were analyzed. The proposed neural controller can cope well with strong interactions, significant time delays, sudden changes in process dynamics without any prior knowledge of the process. It was shown that the neural controller has good features such as fault tolerance, interpolation effect and random learning capability

• Membrane and Water Treatment
• /
• 제7권4호
• /
• pp.367-375
• /
• 2016

Although the bucky paper (BP) made from carbon nanotubes (CNTs) possesses beneficial characteristics of hydrophobic nature and high porosity for membrane distillation (MD) application, weak mechanical strength of BP has often prevented the stable operation. This study aims to fabricate the BP with high mechanical strength to improve its MD performance. The strategy was to increase the purity level of CNTs with an assumption that purer CNTs would increase the Van der Waals attraction, leading to the improvement of mechanical strength of BP. According to this study results, the purification of CNT does not necessarily enhance the mechanical strength of BP. The BP made from purer CNTs demonstrated a high flux ($142kg/m^2{\cdot}h$) even at low ${\Delta}T$ ($50^{\circ}C$ and $20^{\circ}C$) during the experiments of direct contact membrane distillation (DCMD). However, the operation was not stable because a crack quickly formed. Then, a support layer of AAO (anodic aluminum oxide) filter paper was introduced to reinforce the mechanical strength of BP. The support reinforcement was able to increase the mechanical strength, but wetting occurred. Therefore, the mixed matrix membrane (PSf-CNT) using CNTs as filler to polysulphone was fabricated. The DCMD operation with the PSf-CNT membrane was stable, although the flux was low ($6.1kg/m^2{\cdot}h$). This result suggests that the mixed matrix membrane could be more beneficial for the stable DCMD operation than the BP.

• 한국태양에너지학회 논문집
• /
• 제34권5호
• /
• pp.23-31
• /
• 2014

This study was accomplished to get the foundation design data of VMD(Vacuum Membrane Distillation) system for Solar Thermal VMD plant. VMD experiment was designed to evaluate thermal performance of VMD using PVDF(polyvinylidene fluoride) hollow fiber hydrophobic membranes. The total membrane surface area in a VMD module is $5.3m^2$. Experimental equipments to evaluate VMD system consists of various parts such as VMD module, heat exchanger, heater, storage tank, pump, flow meter, micro filter. The experimental conditions to evaluate VMD module were salt concentration, temperature, flow rate of feed sea water. Salt concentration of feed water were used by aqueous NaCl solutions of 25g/l, 35g/l and 45g/l concentration. As a result, increase in permeate flux of VMD module is due to the increasing feed water temperature and feed water flow rate. Also, decrease in permeate flux of VMD module is due to increasing salinity of feed water. VMD module required about 590 kWh/day of heating energy to produce $1m^3/day$ of fresh water.

• 한국식품저장유통학회지
• /
• 제13권5호
• /
• pp.623-628
• /
• 2006

꽃향유로부터 정유물을 추출하여 천연향료로 개발하기 위하여 수증기증류법으로 추출하고 추출공정의 최적 조건을 반응표면 분석법으로 얻고자 하였다. 수증기증류법의 추출조건에 따른 꽃향유 추출물의 품질특성으로 수율과 총페놀화합물, 전자공여능과 주요 향기성분으로 estragole 과 thymol, beta-caryophyllene의 함량을 분석하였다. 추출온도가 추출시간보다 더 큰 영향을 주는 것으로 나타났으며, 각 품질 특성에 대하여 수립된 예측모델식이 모두 유의성이 높아 각 변수의 예측이 가능함을 보였다. 실험구간내에서 능선분석을 통하여 최대점과 추출조건을 예측하였으며 품질특성 값을 최대로 하는 제한 조건으로 얻어진 최적 추출조건은 $108^{\circ}C$와 2.1시간이었다.

• 한국멀티미디어학회논문지
• /
• 제25권7호
• /
• pp.895-902
• /
• 2022

Building segmentation using satellite imagery such as EO (Electro-Optical) and SAR (Synthetic-Aperture Radar) images are widely used due to their various uses. EO images have the advantage of having color information, and they are noise-free. In contrast, SAR images can identify the physical characteristics and geometrical information that the EO image cannot capture. This paper proposes a learning framework for efficient building segmentation that consists of a teacher-student-based privileged knowledge distillation and deformable convolution block. The teacher network utilizes EO and SAR images simultaneously to produce richer features and provide them to the student network, while the student network only uses EO images. To do this, we present objective functions that consist of Kullback-Leibler divergence loss and knowledge distillation loss. Furthermore, we introduce deformable convolution to avoid pixel-level noise and efficiently capture hard samples such as small and thin buildings at the global level. Experimental result shows that our method outperforms other methods and efficiently captures complex samples such as a small or narrow building. Moreover, Since our method can be applied to various methods.