• Journal of the Korean Society for Railway
• /
• v.20 no.4
• /
• pp.458-465
• /
• 2017

The railway signaling system, which controls the course of trains and the distance between trains, is a safety critical system of the railway system because derailment or collision of trains can occur if unsafe failure is generated by any fault. The international standards of reliability, availability, maintainability, and safety of railway applications require that the safety of functions be guaranteed in safety critical systems; system reliability and safety are quantitatively estimated and demonstrated by the failure rates of devices. The development of technology has accelerated the development of railway signaling systems. Existing devices, which have already been verified as to their safety, are applied with special user requirements to reflect the new operation scenario. It is found that the reliability and safety of the devices are different depending on individual application. Therefore, the reliability of the railway signaling system must be considered while complying with the international standards; this requires that the initial failure rate be estimated and demonstrated using fault data gathered over several years. This paper shows a method for demonstrating the initial estimated failure rate and suggests a fault data collection method and an overall process that is based on probability.

• Journal of Internet of Things and Convergence
• /
• v.6 no.2
• /
• pp.65-72
• /
• 2020

The study aims to measure and analysis the spatial equity of Medical welfare facilities for older persons and services, and, based on this, to seek the plan to secure the fairness. To this end, the research was carried out by converging the studies of geography and regional development for the equity of social welfare studies and space arrangement on types and functions of Medical welfare facilities for older persons. The main results of the study showed that, first, in case of the spatial arrangement(desire-to-service), Medical welfare facilities for older persons are located in all areas of cities(Si) and counties(Gun) but mostly existing in cities. Second, in case of the equity of regional distribution of Medical welfare facilities for older persons, it can say the equity in Gun is higher than Si, comparing the regions of Si and Gun. Third, in case of spatial equity of sanatorium for older persons, the spatial equity of care facilities for older persons showed statistical difference depending on the time required to reach the facility, but no difference on distance. This study made various suggestions based on the results of the above research, and suggested the necessity of convergence studies grafting technologies such as AI and the Internet of Things.

• Geophysics and Geophysical Exploration
• /
• v.18 no.1
• /
• pp.1-8
• /
• 2015

To estimate the shear-wave velocity (${\nu}_s$ beneath the OTVZ seismic station on Ngauruhoe volcano in New Zealand, we calculated receiver functions (RFs) using 127 teleseismic data ($Mw{\geq}5.5$) with high signal-to-noise ratios recorded during November 11, 2011 to September 11, 2013. The genetic inversion algorithms was applied to 21 RFs calculated by the iterative time-domain deconvolution method. In the 1-D ${\nu}_s$ model derived by the inversion, the Moho is observed at a 14 km depth, marked by a ${\nu}_s$ transition from 3.7 km/s to 4.7 km/s. The average ${\nu}_s$ of the overlying crust is 3.4 km/s, and the average ${\nu}_s$ of a greater than 9-km thick low-velocity layer (LVL) in the lower crust is 3.1 km/s. The LVL becomes thinner with increasing distance from the station. Another LVL thicker than 10 km with ${\nu}_s$ less than 4.3 km/s is found in the upper mantle. Those LVLs in the lower crust and the upper mantle and the relatively thin crust might be related to the magma activity caused by the subducting Pacific plate.

• Journal of Agricultural Extension & Community Development
• /
• v.3 no.1
• /
• pp.141-155
• /
• 1996

The purpose of this study was to investigate the sole of local newspaper for community development in Korea. Specific objectives of the study were : 1) to identify the role of local newspaper in community development, 2) to analyze problems and situations on local newspapers in Korea, and 3) to suggest desirable roles of local newspaper for the community development. To attain the above objectives, this study was carried out through literature review, contest analysis of selected local newspapers, and the questionnaire survey of selected readers of local newspaper. The data were collected from 267 readers of local newspaper who participated in the farmers` training session in the Rural Development Administration, by using questionnaires developed by the researcher, and total of 263 questionnaires were analyzed. The statistical techniques used for the study were frequence, percentile, standard deviation utilizing the $SPSS/PC^+$. The major findings of the study were as follows : 1. The major roles of functions of local newspapers identified in this study were summarized as to reinforce the community consciousness, to form community opinion, to watch and to monitor community environment, to provide education and entertainment, and to contribute to the conveyance and promotion of community culture. 2. The general characteristic of local newspaper readers surveyed were; a) average distance from town to their village was 9.3 Km, b) average age was 29 years, c) about 75% of them were senior high school graduates, and d) about 96% of them participated in group activities. 3. About 45% of the respondents used television or radio for their moor sources of local news were TV or radio, while about 31% respondents used immunity newspaper for their moor sources of local news. About 67% of the respondents kept their readership over two years, and about 40% of them read community newspaper regularly at their home. 4. The results of content analysis showed drat the local newspapers were dealing with articles on cultural affairs, community consciousness, administrative and civic affairs, however, there were not enough educational news, and various kinds of general news in the community. 5. Survey also showed the most needed news were ; 1) political news including administrative and civic affairs, 2) economic news including sales and distribution, 3) social news including social problems on environmental pollution and community development works, 4) educational news including technology and information, 5) cultural news including guide to cultural and historical sites and local brief news. 6. In the evaluation of local newspaper, the readers were generally positive in valued roles of local newspaper in community relations, community development, promoting community cohesion and understanding of community members, and about 40% of the respondents were positive in predicting the bright future perspectives of local newspapers. 7. In the readers` evaluation of local newspaper, readers responded that local newspapers were very closely related to the community and residents, reflecting the current concerns of local population and recognizing the value of community media, and the contents of local newspaper were positively related to daily lives of community residents and opinions of overall community.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.214-214
• /
• 2003

During a model test of Hutton TLP, a "ringing" response was first observed about 20 years ago. This phenomenon is a resonant build up over the time of wave period and this burst-like motion can cause the extreme load on the TLP tether. It is often detected in the large and steep irregular waves but the generation mechanism leading to the "ringing" is not yet well understood. According to the research since then, the higher order harmonic components may account for the "ringing" on the floating offshore structures. The main purpose of the present research is, thus, to measure the higher harmonic forces exerted on a vertical truncated circular column and to compare them with available data. A vertical truncated cylinder with a diameter of 3.5inch and a draft of 10.5inch is used as a test structure, which is a scaled model of ISSC TLP column. The cylinder is installed at a distance of 45ft from the wave maker in order to avoid parasitic waves created in the wave flap. Attached to the upper part of the cylinder are two force gages to measure the horizontal (surge) and vertical (heave) forces on the cylinder. The incoming waves are Stokes waves with a slope ranging from 0.06 to 0.24. The forces and waves are measured for 60 seconds with a sampling rate of 50 Hz. Among the recorded data, the first 10 waves are excluded because of transient behavior of the waves and the next The horizontal and vertical forces are analyzed up to 5th order harmonics. The horizontal forces are then compared to the values from the theoretical model called "FNV model". In addition, force transfer functions are also investigated. Major findings in this research are below. 1) The first order forces measured are slightly larger than the theoretical values of "FNV model" 2) The "FNV model" considerably overpredicts the second order forces. 3) The larger the amplitude and more extreme the wave slope, the smaller the predictions are compared to the experimental. 4) The higher harmonic forces are significantly smaller than the first harmonic force for all wave parameters. 5) The normalized forces vs. waves slopes are almost constant in the lower harmonics but vary a lot in the higher harmonics. 6) The trend of forces is more nonlinear in the horizontal forces than in the vertical forces as the wave slope increases. 7) The part of the results above is also observed by other researchers and confirmed again through the present work.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.3
• /
• pp.541-550
• /
• 2014

This paper describes a multi-scale user interaction based tiled display visualization system using multiple input devices for monitoring and analyzing Geostationary Ocean Color Imager (GOCI) observation satellite imagery. This system provides multi-touch screen, Kinect motion sensing, and moblie interface for multiple users to control the satellite imagery either in front of the tiled display screen or far away from a distance to view marine environmental or climate changes around Korean peninsular more effectively. Due to a large amount of memory required for loading high-resolution GOCI satellite images, we employed the multi-level image load technique where the image was divided into small tiled images in order to reduce the load on the system and to be operated smoothly by user manipulation. This system performs the abstraction of common input information from multi-user Kinect motion and gestures, multi-touch points and mobile interaction information to enable a variety of user interactions for any tiled display application. In addition, the unit of time corresponding to the selected date of the satellite images are sequentially displayed on the screen and multiple users can zoom-in/out, move the imagery and select buttons to trigger functions.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.6
• /
• pp.49-54
• /
• 2006

The X-ray unit developed by this study is to diagnose emergency cases which is too far from a hospital and to classify the patients. We have to use the X-ray in a ambulance or the scene of an accident where we cannot use the AC220 outlet because of the distance from a hospital as well. The X-ray unit developed has a characteristics as follows. First of all, as the unit has a condenser in itself where there is no electric supply, we can use the X-ray inspector in a mountain area or a island. Second, we can detect by digital detector the information taken by X-ray from DC 12[V] electricity and store as a form of file. A control circuit can secure the reliability of the X-ray unit by using the Pic16F84A X-ray and provide various functions. The X-ray unit which suits remote emergency system can be efficiently used for the emergent cases who is too far from a doctor and a hospital or in the situation where it is difficult to diagnose, transcribe and treat simultaneously.

• Resources Recycling
• /
• v.13 no.2
• /
• pp.39-46
• /
• 2004

The amount of electric furnace dust has been steadily increasing due to the increase of iron scraps which are usually recycled by electric furnace melting process. To date, this electric furnace dust has usually been treated by landfilling, however, because of shortage of landfill sites and heavy metal leaching more desirable treatment schemes are urgently needed. Among several possible schemes for the proper treatment of electric furnace dust, its recycling can be said to be most desirable. In present study, the triboelectrostatic separation of zinc and zinc-containing components from electric furnace dust was attempted based on its physicochemical properties such as particle shape, size distribution, and chemical assay. The dust was found to be mixed with spherical and non-spherical shaped particles and its major component materials were $ZnFe_2$$O_4$, ZnO, Fe, Zn, and FeO. The content of zinc-containing components in the entire dust was observed to be in the range of 15～30 wt%, which reasonably justified that zinc is recyclable. The triboelectrostatic characteristic of each component material was found to be different each other since their work functions were different, and based on this characteristic zinc and zinc-containing component could be flirty separated from the dust. After selecting a proper tribo-elec-trification material, the separation features of zinc and zinc-containing component were examined by taking the distance of electrodes, electric field strength, and scavenging as the experimental variables. The highest zinc-content obtained under the optimal separating condition was found to be up to 50wt%.

• Journal of Technology Innovation
• /
• v.17 no.2
• /
• pp.131-158
• /
• 2009

We examine the effects of environmental or organizational factors on the performance of TLOs(technology transfer offices) in the PRIs(Public research institutes) using SFA(Stochastic Frontier Analysis), a technique for estimating the efficiency of DMUs(decision making units). In SFA, independent variables are assumed to determine the efficient production technique(production frontier) or affect the efficiency of DMUs. Previous researchs show that input variables such as number of personnel, R&D expenditure affect the production frontier while environmental or organizational variables affect the efficiency. We tried to estimate various types of models to find out whether environmental or organizational variables affect output variables differently from the previous research. Main empirical findings are as follows. First, R&D expenditure tends to increase all output variables considered. Second, environmental factors such as type of institutions and location of institutions affect the level of outputs. Third, organizational factors such as reward system for technology transfer also appear to affect the output variables. Fourth, environmental or organizational variables affect the production frontier directly rather than affect the efficiency of DMUs. Lastly, the efficiency of each DMU appear to be 1 or near to 1. Since almost all DMUs are equally efficient, it may not be effective to evaluate technology transfer activities of PRIs by efficiency criteria. We believe that this research should be complemented by additional data. More general types of production function need to be considered, and new techniques with concepts like output distance functions need to be developed to analyse multiple outputs simultaneously.

• Journal of Korean Ophthalmic Optics Society
• /
• v.14 no.1
• /
• pp.115-119
• /
• 2009

Purpose: This study has been conducted to know the relation among accommodative amplitude, response, and facility. Methods: 61 subjects were students without any ocular diseases and presbyopia in a university, Korea. After far distance visual acuity was fully corrected, the amplitude was measured through Push-Up test, the response was measured through Jackson crossed cylinder ${\pm}$0.25D and the facility was measured through +2.00/ -2.00D flipper. Results: The relation among accommodative facility, response and amplitude had not indicate significant level in monocular and binocular. In binocular, 12 eyes (19.6%) had a difference in amplitude, 9 eyes (14.7%) had a difference in response, 2 eyes (3.2%) had a difference in facility from norm which would be expected from their age. 4 eyes (6.5%) had difference in both amplitude and response. 2 eye (3.2%) had difference in both amplitude and facility. In all three of the amplitude, response, facility had not difference. Conclusions: The evaluation of accommodative functions and a patients accommodative dysfunction is examined all facets of amplitude, response, and facility.