• International journal of advanced smart convergence
• /
• 제5권2호
• /
• pp.24-37
• /
• 2016

This paper proposes to increase the efficiency of energy in nodes, which rapidly drops during the transmission of the Low Energy Adaptive Clustering Hierarchy (LEACH), through the use of dual-hop layered application in the sensor field. Along with introducing the dual-hop method in the data transmission, the proposed single-hop method for short-range transmission and multi-hop transmission method between the cluster heads for remote transmission were also introduced. Additionally, by introducing a partial multi-hop method in the data transmission, a single-hop method for short range transmission method between the cluster heads for remote transmission was used. In the proposed DL-LEACH, the energy consumption of the cluster head for remote transmission reduced, as well as increased the energy efficiency of the sensor node by reducing the transmission distance and simplifying the transmission route for short-range transmission. As compared the general LEACH, it was adapted to a wider sensor field.

• 한국시뮬레이션학회논문지
• /
• 제14권3호
• /
• pp.33-42
• /
• 2005

One of the imminent problems to be solved within wireless sensor network is to balance out energy dissipation among deployed sensor nodes. In this paper, we present a transmission relay method of communications between BS (Base Station) and CHs (Cluster Heads) for balancing the energy consumption and extending the average lifetime of sensor nodes by the fuzzy logic application. The proposed method is designed based on LEACH protocol. The area deployed by sensor nodes is divided into two groups based on distance from BS to the nodes. RCH (Relay Cluster Head) relays transmissions from CH to BS if the CH is in the area far away from BS in order to reduce the energy consumption. RCH decides whether to relay the transmissions based on the threshold distance value that is obtained as a output of fuzzy logic system, Our simulation result shows that the application of fuzzy logic provides the better balancing of energy depletion and prolonged lifetime of the nodes.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2005년도 춘계학술대회 논문집
• /
• pp.5-9
• /
• 2005

One of the imminent problems to be solved within wireless sensor network is to balance out energy dissipation among deployed sensor nodes. In this paper, we present a transmission relay method of communications between BS (Base Station) and CHs (Cluster Heads) for balancing the energy consumption and extending the average lifetime of sensor nodes by the fuzzy logic application. The proposed method is designed based on LEACH protocol. The area deployed by sensor nodes is divided into two groups based on distance from BS to the nodes. RCH (Relay Cluster Head) relays transmissions from CH to BS if the CH is in the area far away from BS in order to reduce the energy consumption. RCH decides whether to relay the transmissions based on the threshold distance value that is obtained as a output of fuzzy logic system. Our simulation result shows that the application of fuzzy logic Provides the better balancing of energy depletion and Prolonged lifetime of the nodes.

• Journal of Korean Neurosurgical Society
• /
• 제50권1호
• /
• pp.30-35
• /
• 2011

Objective : Morphometric data for the sympathetic ganglia (SG) of the upper thoracic spine was investigated to identify the exact location of the SG in order to reduce normal tissue injury in the thoracic cavity during thoracoscopic sympathectomy. Methods : In 46 specimens from 23 formalin-fixed adult cadavers, the authors measured the shortest distance from the medial margin of the T1, T2 and T3 SG to the most prominent point and medial margin of the corresponding rib heads, and to the lateral margin of the longus colli muscle. In addition, the distance between the most prominent point of the rib head and the lateral margin of longus colli muscle and the width of each SG were measured. Results : The shortest distance from the medial margin of the SG to the prominent point of corresponding rib head was on average 1.9 mm on T1, 4.2 mm, and 4.1 mm on T2, T3. The distance from the medial margin of the SG to the medial margin of the corresponding rib head was 4.2 mm on T1, 5.9 mm, and 6.3 mm on T2, T3. The mean distance from the medial margin of the SG to the lateral margin of the longus colli muscle was 6.7 mm on T1, 8.8 mm, 9.9 and mm on T2, T3. The mean distance between the prominent point of the rib head and the lateral margin of the longus colli muscle was 4.8 mm on T1, 4.6 mm, and 5.9 mm on T2, T3. The mean width of SG was 6.1 mm on T1, 4.1 mm, and 3.1 mm on T2, T3. Conclusion : We present morphometric data to assist in surgical planning and the localization of the upper thoracic SG during thoracoscopic sympathectomy.

• Anatomy and Cell Biology
• /
• 제57권2호
• /
• pp.194-203
• /
• 2024

The anatomical variations of coracobrachialis muscle (CBM) are of great clinical importance. This study aimed to elucidate the morphological variations, innervation patterns and musculocutaneous nerve (MCN) relation to CBM. Upper limbs of fifty cadavers (30 males and 20 females) were examined for proximal and distal attachments, innervation pattern of CBM and its relation to MCN. Four morphological types of CBM were identified according to number of its heads. The commonest type was the two-headed (63.0%) followed by the single belly (22.0%), three-headed (12.0%) and lastly four-headed (3.0%) type. Moreover, an abnormal insertion of CBM was observed in four left limbs (4.0%); one inserting into the medial humeral epicondyle, the second into the upper third of humeral shaft, the third one in the common tendon of biceps, and the fourth one showing a bifurcated insertion. Also, four different innervation patterns of CBM were identified including MCN (80.0%), lateral cord (14.0%), lateral root of median nerve (4.0%), and median nerve itself (2.0%). The course of MCN was superficial to the single belly CBM (19.0%) and in-between the heads in the other types (71.0%). Measurements of the length and original distance of CBM muscular branches originating from MCN revealed no sex or side significant difference. Awareness of the anatomic variations, innervation patterns, and MCN relation of CBM is imperative in recent diagnostic and surgical procedures to obtain definite diagnosis, effective management and good outcome.

• Nuclear Engineering and Technology
• /
• 제51권6호
• /
• pp.1681-1688
• /
• 2019

In accordance with ASME Boiler and Pressure Vessel (B&PV) Code Sec.XI Appendix. G, a postulated crack is located at the beltline of a reactor pressure vessel because the neutron flux at the beltline is higher than elsewhere. This means that the distance between the core and the semi-spherical bottom head is longer than the distance between the core and the cylindrical beltline. However, several Small and Medium sized Reactors have bottom heads with diverse shapes, including dished or semi-elliptical shapes, to satisfy the requirement and performance. So, the aim of this paper is to evaluate the effect of crack location on Pressure-Temperature limit curve. To do this, two types of postulated crack location, such as beltline and semi-elliptical bottom head, were adopted to derive the Pressure-Temperature limit curve. Also, parametric studies for neutron flux, crack shape and so on were performed. As a result, core critical temperature of semi-elliptical bottom head is found to higher than that of beltline even when they have same values of thickness and neutron flux. This result will be useful to enhance the understanding of Pressure-Temperature limit curve.

• 한국인터넷방송통신학회논문지
• /
• 제15권5호
• /
• pp.139-145
• /
• 2015

본 논문은 무선 센서 네트워크의 계층형 라우팅 프로토콜 중 대표적인 알고리즘인 LEACH(Low Energy Adaptive Clustering Hierarchy)의 원거리 전송 시의 에너지 효율이 급감하는 현상을 개선하기 위하여 DL-LEACH(Dual-hop Layered LEACH) 프로토콜을 제안한다. 이는, 데이터 전송에 듀얼 홉(dual hop : 싱글 홉 + 멀티 홉) 방식을 도입하여 근거리 전송에서는 부분적 싱글 홉 방식을, 원거리 전송에는 클러스터 헤드 간의 멀티 홉 전송 방식을 도입하였다. 제안된 DL-LEACH는 듀얼 홉 전송 방식을 사용하여 원거리 전송의 경우에는 클러스터 헤드의 에너지 소모를 줄이고, 근거리 전송의 경우에는 전송 루틴을 단순화하고 전송 거리를 줄여 센서 노드의 에너지 효율을 증가시켰다. 그러므로 일반적인 LEACH에 비교하여 넓은 센서 필드에 적합하다. 제안된 방법을 시뮬레이션을 통하여 검증하였다.

• 설비공학논문집
• /
• 제28권7호
• /
• pp.269-274
• /
• 2016

This paper aims to suggest the water curtain installation guideline for prevention of fire spread. The water curtain systems play a role in preventing fire spread which is caused by fire flames and radiation heat release from a fire source. The radiation attenuation ratio is affected by the water droplet size, vertical distance from the nozzle and flow rate. This study suggests the water curtain installation guideline as follows : (1) Investigation of a reference store array (2) Calculation of the number of drencher heads (3) Review of the relationship between droplet size and attenuation factor depending on the height of the drencher head (4) Review of a drencher head array and spray overlapping. The reference traditional market in which a fire compartment is installed using a water curtain can be predicted to have a radiation attenuation ratio of 50%.

• 경영과학
• /
• 제26권3호
• /
• pp.55-65
• /
• 2009

The objective of this paper is to propose an ant colony optimization (ACO) for clustering design in wireless sensor network problem. This proposed ACO approach is designed to deal with the dynamics of the sensor nodes which can be adaptable to topological changes to any network graph in a time. Long communication distances between sensors and a sink in a sensor network can greatly consume the energy of sensors and reduce the lifetime of a network. We can greatly minimize the total communication distance while minimizing the number of cluster heads using proposed ACO. Simulation results show that our proposed method is very efficient to find the best solutions comparing to the optimal solution using CPLEX in 100, 200, and 400 node sensor networks.

• International Journal of Internet, Broadcasting and Communication
• /
• 제7권1호
• /
• pp.23-29
• /
• 2015

Energy constraints of wireless sensor networks are an important challenge. Data Transmission requires energy. Distance between origin and destination has an important role in energy consumption. In addition, the location of base station has a large impact on energy consumption and a specific method not proposed for it. In addition, a obtain model for location of base station proposed. Also a model for distributed clustering is presented by cluster heads. Eventually, a combination of discussed ideas is proposed to improve the energy consumption. The proposed ideas have been implemented over the LEACH-C protocol. Evaluation results show that the proposed methods have a better performance in energy consumption and lifetime of the network in comparison with similar methods.