• 펄프종이기술
• /
• 제29권3호
• /
• pp.51-59
• /
• 1997

Dissolving pulp is a low yield(30∼35%) bleached chemical pulp that has a high cellulose content (95% or higher) suitable for use in cellulose derivatives such as rayon, cellulose acetate. This research was studied for dissolving pulp preparation as the raw material of viscose rayon from commertial pulps. (TMP, CP, DIP) In the change of pulp(cellulose) characteristics after sodium hypochlorite and solvolysis treatment. the following results were obtained In the case of sodium hypochlorite pretreatment, we have obtained pulp that high purity cellulose, but degree of polymerization was inclined to decrease less than 170∼240. Comparing sodium hypochlorite pretreatment and solvolysis pretreatment, solvolysis pretreatment is superior to sodium hypochlorite process for making dissolving pulp. We think that the low degree of polymerization of cellulose because of increasing degradation of cellulose during delignification treatment.

• Journal of the Korean Wood Science and Technology
• /
• 제25권4호
• /
• pp.68-74
• /
• 1997

This research was studied dissolving pulp for rayon production, which is not KP, SP methods but steam explosion and oxygen alkali treatment. The variation of characterization in wood cellulose after steam explosion and oxygen alkali treatment this follows. In the oxygen alkali treatment of exploded pine wood, yield of dissolving pulp was lower than steam-exploded oak wood, and we have obtained dissolving pulp that high purity cellulose, but degree of polymerization was inclined to decrease less than 200. In the case of steam-exploded oak wood, degree of polymerization was higher than steam-exploded pine wood but purity of cellulose was lower than its.

• Journal of the Korean Wood Science and Technology
• /
• 제25권4호
• /
• pp.45-50
• /
• 1997

This research was studied for dissolving pulp preparation as the raw material of viscose rayon from woody biomass by solvolysis pretreatment. In the change of pulp characteristic after solvolysis pretreatment, the following results were obtained. In the case of solvolysis pretreatment, we have obtained pulp that high purity cellulose, and degree of polymerization was inclined to decrease less than 440 on the phosphoric acid as catalyst. Comparing phosphoric acid and formic acid as catalyst in the solvolysis pretreatment, using on formic acid catalyst is superior to phosphoric acid catalyst for making dissolving pulp.

• 펄프종이기술
• /
• 제47권5호
• /
• pp.23-32
• /
• 2015

In this study, chemical and physical changes of dissolving pulps which have similar viscosity by dry milling and fractionation were investigated. We used two types of dissolving pulp made from wood and cotton linter fiber, respectively. Dry milling was executed by knife cutter and pulp powders were fractionated by sieve shaker into 4 grades. We analyzed fiber properties, crystallinity index, viscosity, molecular weight of pulp sheet and powders. It was found that poly-dispersity index of cotton linter pulp was smaller than that of wood pulp, meaning that cotton pulp has more narrow molecular weight distribution. It was assumed that these were related to exposure times to chemical treatment which cut cellulose chains not evenly. At least 4 times of chemical treatments for wood pulp were executed and only two times of chemical treatments for cotton linter pulp were done. After dry milling average molecular weight and crystallinity index of cotton linter pulp powders were reduced and these were related to fines content and shape of pulp powders.

• Journal of the Korean Wood Science and Technology
• /
• 제21권1호
• /
• pp.59-64
• /
• 1993

The purpose of this study is to investigate the preparation of the carboxymethylcellulose from recycled fiber, especially on the reactivity of carboxymethylation. Using a deinked pulp and a dissolving pulp. Green's method is adapted to the carboxymethylation. We conformed that the carboxymethyl group is led for recycled fiber by FT-IR analysis. The recycled fiber is more reactive than the dissolving pulp because the recycled fiber had been defiberated and pretreated with alkali. It suggests that deinking process is in accordance with pretreatment of CMC process. Therefore, it may be possible to prepare CMC from the recylced fiber economically.

• 펄프종이기술
• /
• 제36권4호
• /
• pp.41-48
• /
• 2004

To make a basepaper for multipurposed seed paper, old news print (ONP) and mixed office waste paper (MOW), modified and unmodified with a commercial cellulase, were investigated. Each handsheet was applied with different chemicals such as insecticides, germicides and herbicides. The interactions behaviors of chemicals used with base papers were evaluated by means of the contents of chemicals impregnation and dissolving behaviors in water and soil. The ONP and MOW treated with the cellulase had higher impregnation and dissolving capacities in both water and soil than untreated ONP and MOW. However, the modified ONP showed lower impregnation and dissolving capacities compared to the modified MOW. The content of impregnation of chemicals would be affected with the degree of microfibrils produced by the modification treatment. Otherwise, dissolving capacities of chemicals depend on the affinity of the residual lignin in the paper.

• 펄프종이기술
• /
• 제42권5호
• /
• pp.24-30
• /
• 2010

Papermaking technology has drastically improved over the last 20 years to face new challenges. Because environmental regulations have become increasingly strict, papermaking systems have had to accommodate elevated recycled pulp content and an increased use of recycled process water. Process water in papermaking systems has become more dirtier and reduced polymer efficiency. Amphoteric PAM demonstrated a higher degree of stability in a high conductivity environment compared to cationic PAM. This was illustrated by the improved retention performance, particularly the ash retention. This amphoteric polymer can be used for board or newsprint production using recycled pulp, especially for the systems where polymer dissolving water is high in conductivity and degradation of cationic functional groups of cationic PAM can occur.

• 펄프종이기술
• /
• 제45권1호
• /
• pp.6-12
• /
• 2013

TFormic acid-hydrogen peroxide (or performic acid) pulping process needs milder reaction condition than other chemical pulping process. Two-step formic acid-hydrogen peroxide pulping process can produce the chemical pulp with similar pulp yield and lignin content compared with soda-anthraquinone process. Formic acid-hydrogen peroxide pulp can be produced less xylan content than other alkaline pulps, which favor for dissolving pulp production. Formic acid-hydrogen peroxide pulp showed better response beating than soda-anthraquinone(AQ) pulps with reaching target freeness with less beating. Also, formic acid-hydrogen peroxide pulp had better tensile index at similar freeness level compared with soda-AQ pulps.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2003년도 추계학술발표논문집
• /
• pp.148-153
• /
• 2003

The influence of sizing, fiber and pigment type on coating penetration, using commercial paper and two types of handsheets as the base paper which were prepared from thermomechanical pulp(TMP) and hardwood bleached kraft pulp(KP) sized internally with alkyl ketone dimmer(AKD), was studied in terms of characteristics of coating holdout. Laboratory rod draw down coater was used for surface sizing and coating application. Characterization of coating penetration was done by measuring the roughness of the backside of coating layer. The backside of the coating was exposed by dissolving the fibers in a solution of cupriethylenedimine(CED). Data show that internal sizing of base paper is effective and surface sizing is more effective to prevent coating penetration. Comparing between the two types of base papers, backside roughness of coating layer of TMP sheet is much larger and sizing is more effective to reduce coating penetration than those of KP sheet. With regard to pigment type, clay is more effective than calcium carbonate for better coating holdout.

• 펄프종이기술
• /
• 제45권6호
• /
• pp.17-23
• /
• 2013

The reduction of metal ion from the cotton linter for the preparation of NMMO (N-methylmorpholine N-oxide)-based dissolving pulp was investigated. The NMMO-based dissolving pulp was usually used for the manufacture of high quality fabrics, and need to have high alpha cellulose content and high brightness. NMMO, which is environmentally friendly, and reusable after recovering process, is very sensitive to the metal ions such as Cu, Fe, Mg, and Cr. Electron beam, sulfuric acid, acetic acid, and ozone treatment before bleaching were used and the concentration changes of the metal ions were compared to that of EDTA, a chelating agent. It was found that both acid treatments (sulfuric and acetic acid) were very effective and comparable to EDTA treatment at the same dosage in metal ion reduction, but electron beam and ozone treatment were not. The sulfuric acid treatment turned out to be effective in metal ion reduction, and most inexpensive.