• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.231-234
• /
• 2000

Vertically aligned carbon nanotubes were synthesized on Ni-coated Si substrates using microwave plasma-enhanced chemical vapor deposition. The grain size of Ni thin films was varied with the RF power density during the RF magnetron sputtering process. It was found that the diameter, growth rate, and density of carbon nanotubes could be controlled systematically by the grain size of Ni thin films. With decreasing the grain size of Ni thin films, the diameter of the nanotubes decreased, whereas the growth rate and density increased. High-resolution transmission electron microscope images clearly demonstrated synthesized nanotubes to be multiwalled. The number of graphitized wall decreased with decreasing the diameter. Field emission properties will be further presented.

• 인포메이션 디스플레이
• /
• 제5권1호
• /
• pp.25-30
• /
• 2004

Poly-Si TFT(Thin Film Transistor) technology are reviewed and discussed. Poly-Si TFTs fabricated on glass using low-temperature process were studied extensively for the application to LCD (Liquid Crystal Display) as well as to OLED(Organic Light Emitting Diode) Display. Currently, one of the application targets of the poly-Si TFT is emphasized on the highly functional SOG(System on Glass). Improvement of device characteristics such as an enhancement of carrier mobility has been studied intensively by enlarging the grain size. Reduction of the voltage and shrinkage of the device size are the trend of AM FPD(Active Matrix Flat Panel Display) as well as of Si LSI, which will arise a peculiar issue of uniformity for the device performance. Some approaches such as nucleation control of the grain seed or lateral grain growth have been tried, so far.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1642-1645
• /
• 2007

The brightness of LED changes according to the current flowing through LEDs. The current mirror was used to drive LEDs effectively. The reference current of the current mirror was usually controlled by the resistor but the size of this resistor is very large and this resistor consumes too much power for high power LED backlight driving. The reference current of the current mirror LED driver was controlled by using flyback converter at small size with low power consumption in this paper. The concept of active current source was presented.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1224-1227
• /
• 2009

When evaluating the quality of images and displays, it is important to combine the characteristics as perceived by the human visual system and measured by equipment using subjective and objective methods, respectively. In the case of objective methods, the quality of a display is measured using colorimetric or radiometric devices according to existing standards covering the color temperature, gamut size, gamma characteristic, and device characterization. Meanwhile, subjective methods assess the quality of an image using the human visual system based on a comparison with a reference or counterpart using such metrics as the sharpness, noise, contrast, saturation, and color accuracy. Objective and subjective methods are usually used together in comparison, as ultimately it is observers watching images on a display. In addition to existing objective methods, a new image quality metric is also introduced as regards the JPEG compression ratio that is reflected in the relationship between the gamut size and the color fidelity in CIELAB color space.

• 반도체디스플레이기술학회지
• /
• 제17권2호
• /
• pp.41-46
• /
• 2018

This paper proposes a new method for the number recognition on dot matrix LED display. The proposed method uses morphological processing that dilates dots of numbers and connects the dots into strokes. The size of numbers is normalized using horizontal projection because the gaps of dots are different according to the size of numbers. The numbers are segmented by connected component analysis and finally, template matching method recognizes the segmented numbers. The proposed method is implemented using C language in Raspberry Pi system with a camera module for a real-time image processing. Experiments were conducted by using various dot matrix LED displays. The results show that the proposed method is successful for the number recognition on dot matrix LED display.

• 한국HCI학회논문지
• /
• 제14권1호
• /
• pp.45-52
• /
• 2019

자율주행 자동차 내 인포테인먼트(infotainment) 서비스에 대한 요구가 증가할 것으로 예측되면서 디스플레이 역할이 커질 것으로 기대되고 있다. 특히 센터페시아 디스플레이의 활용도가 증대될 것이라고 전망되며, 디스플레이의 크기 확대 및 위치 변화가 예상되기 때문에 사용자 경험 관점에서 연구가 선행되어야 한다. 하지만 자율주행 자동차 디스플레이의 크기 및 위치에 대해 사용자 의식을 파악한 연구는 미비한 실정이다. 본 논문에서는 자율주행 단계별로 센터페시아 디스플레이 크기 및 위치에 대한 선호도를 제시하는 것이며, 이를 위해 본 연구는 주행 시뮬레이터를 활용한 실험 후 설문조사 및 회상적 발성사고법(Retrospective Think-aloud)을 통한 인터뷰를 진행하였다. 조사 결과, 자율주행 2단계에서는 '상단 위치 가로형 디스플레이(12.5인치)'에 대한 선호도가 높게 나타났으며, 자율주행 3단계에서는 '세로형 디스플레이(17인치)'에 대한 선호도가 자율주행 2단계와 비교하여 통계적으로 유의미하게 높은 것으로 나타났다. 본 연구는 양산되지 않은 자율주행 자동차 디스플레이를 대상으로 주행 시뮬레이터를 활용하여 사용자의 선호도를 제시한 연구로 중요한 의미를 지닌다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.779-782
• /
• 2004

Establishing and maintaining optimum lamp operating temperature is critically important in backlight systems for large area displays. The information presented in this paper is based upon work completed for a tiled 37.5" AM LCD, plus projections for a 37.5", 42" & 50" monolithic display. Due to the size of the units, a requirement for highly collimated light and a requirement for high brightness, >550 nits at the display surface, significant wattage is required which generates high heat levels in the backlight display assembly and potentially, at the display rear surface. Uniformity of illumination becomes an important element in the system design because of the large area involved.

• 대한인간공학회지
• /
• 제33권3호
• /
• pp.191-202
• /
• 2014

Objective: This study is conducted on the differences between flat and curved displays with respect to location of focused points, posture and satisfaction as well as preferred tilt angles. Background: In order to avoid physical and eye fatigue caused by misplayed sitting posture, many studies have asserted that the display requires appropriate location, size and tilt angle as well as curvature. However, most studies have focused on the work environment and the results are varied in the extent. Method: Eye height data in sitting posture were collected from 30 participants. Participants selected the most comfortable viewing angle within the range from $0^{\circ}$ to $12^{\circ}$ while watching videos for both curved and flat display. Then, physical and eye fatigue and overall satisfaction were subjectively evaluated. Lateral diagram describing viewing display condition was set and used to develop linear models for expecting the preferred tilt angle. Results: Due to sitting in the natural viewing posture rather than upright, the eye height is lowered to about 4.6 centimeters, on average, for both displays showing no significant differences. In contrast, preferred angles for the two displays are significantly different and this can be interpreted that curvature vary the points focused. Two linear models as functions of sitting eye height are developed to expect preferred tilt angle for each display. Based on the result of overall satisfaction evaluation, curved display is statistically better than flat display. Conclusion: The results show that flat and curved displays are significantly different expect for the viewing posture. However, reasons for preferring curved display are not accurately factorized and the linear models are limited in the experiment condition such as size of display, distance between display and viewer and other physical environmental factors. Further studies on curved displays under more various conditions are required. Application: This study can contribute to use of the curved display in various way.

• 기술혁신학회지
• /
• 제5권3호
• /
• pp.396-411
• /
• 2002

This is an analysis of international mobile displays industry. There has been severe competition in market and technology. In technology, There has been competition between Japan, USA and Korea. On the other hand, there has been competition in the products market between Korea, Japan and Taiwan. Recently Korea has catched-up Japan in mid-size display industry. The response of Japanese firms are as follows: technological collaboration with Taiwanese firms in mid-size and concentration in small and large size displays. New competition, however, has started, since new technologies such as TFT-LCD and OELD have been used in products.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1615-1618
• /
• 2005

In this paper, implementation of object-based multiview 3D display using object segmentation and adaptive disparity estimation is proposed and its performance is analyzed by comparison to that of the conventional disparity estimation algorithms. In the proposed algorithm, firstly we can get segmented objects by region growing from input stereoscopic image pair and then, in order to effectively synthesize the intermediate view the matching window size is selected according to the extracted feature value of the input stereo image pair. Also, the matching window size for the intermediate view reconstruction (IVR) is adaptively selected in accordance with the magnitude of the extracted feature value from the input stereo image pair. In addition, some experimental results on the IVR using the proposed algorithm is also discussed and compared with that of the conventional algorithms.