• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1547-1550
• /
• 2008

We are suggesting a new index to represent the performance of PDP, such as Specific Performance Index (SPI) that includes luminous efficacy and panel reflectance. High Xe gas mixture and low panel capacitance are well known as key factors to improve luminous efficacy of PDP [1]. However, higher driving voltage and longer discharge time lag is an obstacle when applying these technologies. Modified cell design, new materials and driving waveform enable us to overcome these obstacles. High efficient phosphor is also a key material to improve luminous efficacy. Phosphors coated with pigment are used to reduce panel reflectance. High performance 50-inch HD PDP with luminous efficacy of 2.3 lm/W has been developed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.330-332
• /
• 2009

Highly stable bottom gate thin film transistors(TFTs) with a zinc indium tin oxide(Zn-In-Sn-O:ZITO) channel layer have been fabricated by rf-magnetron co-sputtering using a indium tin oxide(ITO:90/10), a tin oxide and a zinc oxide targets. The ZITO TFT (W/L=$40{\mu}m/20{\mu}m$) has a mobility of 24.6 $cm^2$/V.s, a subthreshold swing of 0.12V/dec., a turn-on voltage of -0.4V and an on/off ratio of >$10^9$. When gate field of $1.8{\times}10^5$ V/cm was applied with source-drain current of $3{\mu}A$ at $60^{\circ}C$, the threshold voltage shift was ~0.18 V after 135 hours. We fabricated AM-OLED driven by highly stable bottom gate Zn-In-Sn-O TFT array.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.696-699
• /
• 2004

Of the emissive display technologies, field emission displays using pasted carbon nanotubes offer several advantages over other competing cathode materials such as low driving voltage, possible large-area and low-cost processes. In this study, formulation of carbon nanotube paste and its electron field emission properties are characterized. Also the effects of additive powders and surface morphology on electron emission are reported.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.284-289
• /
• 1995

This paper presents a haptic display of a cooperative work between the networked multiple users. Excluding the possibility of large timedelay among the users, it is presented the way of configuring individual haptic display systems including the computation of interaction forces, joint driving forces of haptic devices and simulation of the virtual objects. A haptic display system is developed consisting of two haptic display devices operated by two remote users and experimental results to show the validity of the proposed method are also presented.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1152-1154
• /
• 2007

The distributions of mercury (Hg) in the bulb of a mercury vapor lamp are significantly affected by its turn-off conditions. Most of mercury should be attached to the electrodes before ignition by a proper turn-off condition. In the present study, the effect of the transient profiles of lamp cooling after turn-off on the distribution of Hg was investigated.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1155-1158
• /
• 2007

To reduce acoustic noise level of an AV projector, primary noise sources of AV projector were analyzed. Based on the analyzed result, methods to control each source are presented and tried. Structure-borne noise can be controlled by anti vibration design of mounting system, and air-borne noise by reducing flow resisitvity.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.13-16
• /
• 2008

Mobile phones are evolving into a platform for internet access. In order to display web pages in handsets, WVGA and around 3-inch displays are strongly recommended. Low power consumption, compactness and narrow boarder area are essential. The general requirements for WVGA solution and the design factors to reduce the power consumption and boarder area discussed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1649-1651
• /
• 2008

A novel configured S-IPS LCD has been developed introducing a new compensation film with an anti-reflective layer. This new technology provides wide viewing characteristics as well as excellent visibility under bright indoor lighting or natural lighting.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.837-840
• /
• 2008

This paper studies the current regulator of LED Backlighting system for LCD. The proposed regulator and a typical regulator are introduced. To find out the characteristics of two regulators, Prototype samples of LED Backlighting system are made. Both the proposed regulator and a typical regulator are compared with electrical, thermal and optical characteristics each viewpoint.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.50-53
• /
• 2005

An analysis on the viewing parameters of floating display system based on integral imaging is introduced. A floating display system based on integral imaging is a three-dimensional display system which can display three-dimensional moving pictures with impressive feeling of depth. The analysis given in this paper will optimize the design of the floating display system for the specific application.