• Journal of Trauma and Injury
• /
• 제23권1호
• /
• pp.53-55
• /
• 2010

A thyroid cartilage fracture is a rare entity and can be overlooked easily. Such cases are difficult to diagnose, and assessment and treatment guidelines are difficult to determine. CT of the neck region may be useful when acute airway intervention is not required or when more information regarding the neck's anatomy is required for management decisions. We describe a case of a thyroid cartilage fracture with displacement. In the emergency department (ED), neck CT and fiberoptic nasopharyngoscopy were used to assess the status of the patient's (a male) vocal chords immediately. He remained unable to phonate continuously. After an immediate assessment, we decided to use steroid and conservative therapy. The patient had a good recovery and was without symptoms one month after injury. There is no question that early surgical repair of neck injuries affords the best results for airway and voice patency in most cases however, we suspect that surgical repair is not needed in all cases. Early recognition and an accurate therapy plan for a thyroid fracture with displacement are essential. Therefore, the emergency physician's immediate and careful decision based on endoscopy and neck CT is important for the patient's long-term recovery.

• International Journal of Concrete Structures and Materials
• /
• 제11권2호
• /
• pp.365-375
• /
• 2017

An experimental evaluation of crack propagation and post-cracking behavior in steel fiber reinforced concrete (SFRC) beams, using full-field displacements obtained from the digital image correlation technique is presented. Surface displacements and strains during the fracture test of notched SFRC beams with volume fractions ($V_f$) of steel fibers equal to 0.5 and 0.75% are analyzed. An analysis procedure for determining the crack opening width over the depth of the beam during crack propagation in the flexure test is presented. The crack opening width is established as a function of the crack tip opening displacement and the residual flexural strength of SFRC beams. The softening in the post-peak load response is associated with the rapid surface crack propagation for small increases in crack tip opening displacement. The load recovery in the flexural response of SFRC is associated with a hinge-type behavior in the beam. For the stress gradient produced by flexure, the hinge is established before load recovery is initiated. The resistance provided by the fibers to the opening of the hinge produces the load recovery in the flexural response.

• Journal of Oral Medicine and Pain
• /
• 제46권1호
• /
• pp.14-19
• /
• 2021

Various conditions such as pain or effusion of temporomandibular joint, degenerative condylar resorption, and articular disc displacement can be a cause of malocclusion. However, the reasons of occlusal changes are ambiguous in some patients. Unexpected occlusal change in patients with or without temporomandibular disorder (TMD) symptom was mostly caused by masticatory muscular disorders. This article reports two cases of recovery of occlusal relationship in TMDs patients after stabilization splint therapy. Stabilization splint therapy could be useful in certain conditions of occlusal changes in TMD.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제42권5호
• /
• pp.259-264
• /
• 2016

Objectives: We evaluated and recorded post-traumatic and postoperative neurosensory deficits of the inferior alveolar nerve (IAN) in mandibular fracture in order to identify associated risk factors. Materials and Methods: This was a prospective cohort study composed of 60 patients treated for mandibular fracture. The primary study variable was the change between the post-traumatic IAN neurosensory examination score and the score after fracture reduction. Risk factors were categorized as demographic, anatomic, fracture displacement, and treatment. Appropriate descriptive and bivariate statistics were computed. Results: Sixty patients with unilateral mandibular fracture reported within 24 hours of injury were evaluated over a one-year period. A post-traumatic neurosensory deficit was observed in 52 patients (86.7%), the percentage of which was reduced to 23.3% over the follow-up period. Abnormal postoperative neurosensory scores were significantly higher in angle fracture cases (33.3%) compared to body fracture cases (11.1%). When recovered and non-recovered neurosensory scores were compared by fracture location, 88.9% of body fracture cases showed significant recovery compared to 66.7% of mandibular angle fracture cases. Cases with less than 5 mm fracture displacement showed statistically significantly higher neurosensory recovery scores (90.6%) compared to those with more than 5 mm fracture displacement (60.7%). Conclusion: Use of a miniplate with mono-cortical screws does not play a role in increasing IAN post-traumatic neurosensory deficit. Early management can reduce the chances of permanent neurosensory deficit. Mandibular fracture displacement of 5 mm or more and fracture location were found to be associated with an increased risk of post-traumatic IAN neurosensory score worsening.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 춘계학술발표대회 논문집
• /
• pp.18-21
• /
• 2003

The effect of interface bonding strength on the recovery force of SMA wire reinforced polymer matrix composites was investigated by pullout test. Firstly, the recovery forces and transformation temperatures of various prestrained SMA wires were measured and 5% prestrained SMA wires were prepared for the reinforcements of composites. EPDM incorporated with 20vol% silicon carbide particles(SiCp) of 6, 12, $60{mutextrm{m}}$ size were used as matrix. Pullout test results showed that the interface bonding strength increased when the SiCp size decreased due to the increase of elastic modulus of matrix. Cyclic test of composites was performed through control of DC current at the constant displacement mode. The abrupt decrease of recovery force during cycle test at high current was occurred by thermal degradation of matrix. This was in good agreement with temperature related in the thermal degradation of matrix. The hysteresis of recovery force with respect to the temperature was compared between wire and composite and the hysterisis of composites was smaller than the wire due to less thermal conduction.

• 한국농공학회논문집
• /
• 제51권5호
• /
• pp.51-58
• /
• 2009

The total recovery ratio test on undisturbed clay soil sampling in the field and the finite element method analysis on modified static state of penetration process were conducted for the purpose of deciding the most important factor among the shape factors of thin wall tube. The adhesion between tube wall and soil did not decrease although internal clearance ratio of tube increased within the little change of tube area ratio. The most part of disturbance occurred in the tip of sampling tube during the penetration. The longitudinal displacement was larger than the lateral displacement because soil was confined laterally after being entered into tube, and also the longitudinal displacement was larger in the upper part of the sample tube than in the lower part.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.272-276
• /
• 1996

This study deals with the speed control of an overcentered variable-displacement hydraulic motor on a constant pressure network, which is noted for its high system efficiency fast dynamic response and energy recovery capability. The speed control characteristics of the conventional cascade PI controller are largely affected by load-torque disturbances. To obtain robust speed control despite torque disturbances, the load torque is estimated by an observer based on a mathematical model and compensated for by a feedforward loop. It is shown by experiment that robust speed control may be obtained with the proposed controller. The experimental data agree fairly well with the theoretical analysis.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제2B권3호
• /
• pp.100-108
• /
• 2002

A simple sustain driver employing an energy recovery function is proposed as a highly efficient driver of a plasma display panel. The proposed driver uses dual resonance in the sustaining mode operation: a main resonance between an inductor and an external capacitor to produce alternative pulses and a sub-resonance between an inductor and a panel to recover the energy consumption by the capacitive displacement current of the PDP. The operational principle and design procedure of the proposed circuit are presented with theoretical analysis. The operation of the proposed sustain driver is verified through simulation and experiments based on a 7.5-inch-diagonal panel with a 200 KHz operating frequency.

• 유공압시스템학회:학술대회논문집
• /
• 유공압시스템학회 2010년도 춘계학술대회
• /
• pp.116-125
• /
• 2010

In this study, a novel hydraulic energy-regenerative system was presented from its proposal through its modeling to its control. The system was based on a closed-loop hydrostatic transmission and used a hydraulic accumulator as the energy storage system in a novel configuration to recover the kinetic energy without any reversion of the fluid flow. The displacement variation in the secondary unit was reduced, which widened the uses of several types of hydraulic pump/motors for the secondary unit. The proposed system was modeled based on its physical attributes. Simulation and experiments were performed to evaluate the validity of the employed mathematical model and the energy recovery potential of the system. The experimental results indicated that the round trip recovery efficiency varied from 22% to 59% for the test bench.

• 한국생산제조학회지
• /
• 제24권4호
• /
• pp.414-420
• /
• 2015

In this study, the linear quadratic Guassian loop transfer recovery (LQG/LTR) control technique was combined with an integrator and applied to an inchworm having piezoelectric actuators for precise motion tracking. The piezoelectric actuator showed nonlinear response characteristics, including hysteresis, due to its ferroelectric characteristics and the residual displacement phenomenon. This paper proposes a feedback control scheme using the LQG/LTR controller with an integrator to improve the ability to track the response to complex input signals and to suppress the phenomenon of hysteresis and residual vibration. Experimental results show that the developed feedback control system for an inchworm can track the various motion contours quickly without residual vibration or overshoot.