• 마이크로전자및패키징학회지
• /
• 제24권1호
• /
• pp.57-65
• /
• 2017

모바일 기기 내부에 있는 전자부품들은 반도체 칩이나 그 밖의 여러 가지 재료로 구성되어 있다. 이러한 전자부품들은 매우 얇고, 구성된 재료들은 다양한 열팽창 계수를 가지고 있으므로 온도 변화나 외부 하중에 의해서 쉽게 굽힘이 일어난다. 그림자 무아레 방법은 비접촉으로 전체 영역에 걸친 면외변위를 측정하는 광학적 방법이지만 측정 감도를 $50{\mu}m/fringe$ 이내로 하기 어려워서 반도체 패키지의 굽힘변형을 측정하기에는 적당하지 않은 면이 있었다. 본 논문에서는 그림자 무아레 기법의 여러 실험조건들을 최적화하여 $25{\mu}m/fringe$의 향상된 감도를 갖는 측정 방법을 구현하였다. 또한 이로부터 위상이동에 의해 기록되는 4장의 그림자 무늬를 영상 처리하여 감도가 4배 향상된 그림자 무늬를 얻어내고 이를 스마트폰의 소형 전자부품들에 적용하여 온도변화에 따라 발생하는 굽힘 변위를 $5{\mu}m/fringe$의 고감도로 측정하였다.

• Geomechanics and Engineering
• /
• 제14권1호
• /
• pp.9-17
• /
• 2018

Brazilian splitting tests, uniaxial compression tests and triaxial compression tests are carried out on the coal samples cored from Shanxi group $II_1$ coal seam of Jiaozuo coal mine, Henan province, China, to obtain their property parameters. Considering the bedding has notable effect on the property parameter of coal, the samples with different bedding angles are prepared. The effects of bedding on the anisotropic characteristics of the coal seam are investigated. A geological geomechanical model is built based on the geology characteristics of the Jiaozuo coal mine target reservoir to study the effects of bedding on the fracture propagations during hydraulic fracturing. The effects of injection pressure, well completion method, in-situ stress difference coefficient, and fracturing fluid displacement on the fracture propagations are investigated. Results show bedding has notable effects on the property parameters of coal, which is the key factor affecting the anisotropy of coal. The hydraulic cracks trends to bifurcate and swerve at the bedding due to its low strength. Induced fractures are produced easily at the locations around the bedding. The bedding is beneficial to form a complicated fracture network. Experimental and numerical simulations can help to understand the effects of bedding on hydraulic fracturing in coalbed methane reservoirs.

• Journal of Biosystems Engineering
• /
• 제40권3호
• /
• pp.212-223
• /
• 2015

Purpose: Physical properties of Detarium microcarpum seeds were investigated as a function of moisture content to explore the possibility of developing bulk handling and processing equipment. Methods: Seed size, surface area, and 1,000-seed weight were determined by measuring the three principal axes, measuring area on a graph paper, and counting and weighing seeds. Particle and bulk densities were determined using liquid displacement and weight in a measuring cylinder, respectively. Porosity was computed from particle and bulk densities. Roundness and sphericity were measured using shadowgraphs. Angle of repose and static and kinetic coefficients of friction were determined using the vertical cylindrical pipe method, an inclined plane, and a kinetic coefficient of friction apparatus. Results: In the moisture range of 8.2%-28.5% (db), the major, intermediate, and the minor axes increased from 2.95 to 3.21 cm, 1.85 to 2.61 cm, and 0.40 to 1.21 cm, respectively. Surface area, 1,000-seed weight, particle density, porosity, and angle of repose increased from 354.62 to $433.19cm^2$, 3.184 to 3.737 kg, 1060 to $1316kg/m^3$, and 30.0% to 53.1%, respectively, whereas bulk density decreased from 647.6 to $617.2kg/m^3$. Angle of repose increased from $13.9^{\circ}$ to $28.4^{\circ}$. Static and kinetic coefficients of friction varied between 0.096 and 0.638 on different structural surfaces. Conclusions: Arithmetic mean, geometric mean, and equivalent sphere effective diameters determined at the same moisture level were significantly different from each other, with the arithmetic mean diameter being greatest. Surface area, 1,000-seed weight, particle density, porosity, and angle of repose all increased linearly with moisture content. Bulk density decreased linearly with moisture content. The coefficients of friction had linear relationships with moisture content. The highest values of static and kinetic coefficients of friction were observed on galvanized steel and hessian fabric, respectively, whereas the lowest values were observed on fiberglass.

• 한국전산구조공학회논문집
• /
• 제17권2호
• /
• pp.183-192
• /
• 2004

본 논문에서는 수직으로 시추된 해양 파일에 대한 새로운 동적 해석절차가 제안되고 전형적 설계문제에 의하여 검증된다. 해수에 잠긴 파일의 구조는 물론 해양파도와 조류에 의한 힘도 유한요소법에 의해서 정식화되고 모델링된다. 유한요소 방정식에 적합한 파력을 구하기 위해서 여러 가지 파도이론 가운데서도 Airy의 파도이론이 시험되고 선정되었다. 조류의 후방와류에 기인한 횡방향 양력은 Strouhal 진동수와 적절한 양력계수를 가진 간단한 조화함수에 기초한다 파일에 대한 고유진동수 해석과 주파수 응답해석은 정식화 결과를 NASTRAN에 입력하여 계산되었다. 여기서 제안된 절차에 의해 얻어진 동적 변위와 응력의 결과는 기본설계해석 단계로서 해양파일의 파력과 조류 양력에 의한 동적거동을 구할 수 있으며 설계에 응용될 수 있음을 보여준다

• Geomechanics and Engineering
• /
• 제21권4호
• /
• pp.357-369
• /
• 2020

Different from the conventional planar fracture and simplified Newton model, for power-law slurries with a lower water-cement ratio commonly used in grouting engineering, flow model in geological rough fractures is built based on ten standard profiles from Barton (1977) in this study. The numerical algorithm is validated by experimental results. The flow mechanism, grout superiority, and water plugging of pseudo plastic slurry are revealed. The representations of hydraulic grouting properties for JRCs are obtained. The results show that effective plugging is based on the mechanical mechanisms of the fluctuant structural surface and higher viscosity at the middle of the fissure. The formulas of grouting parameters are always variable with the roughness and shear movement, which play a key role in grouting. The roughness can only be neglected after reaching a threshold. Grouting pressure increases with increasing roughness and has variable responses for different apertures within standard profiles. The whole process can be divided into three stationary zones and three transition zones, and there is a mutation region (10 < JRCs < 14) in smaller geological fractures. The fitting equations of different JRCs are obtained of power-law models satisfying the condition of -2 < coefficient < 0. The effects of small apertures and moderate to larger roughness (JRCs > 10.8) on the permeability of surfaces cannot be underestimated. The determination of grouting parameters depends on the slurry groutability in terms of its weakest link with discontinuous streamlines. For grouting water plugging, the water-cement ratio, grouting pressure and grouting additives should be determined by combining the flow conditions and the apparent widths of the main fracture and rough surface. This study provides a calculation method of grouting parameters for variable cement-based slurries. And the findings can help for better understanding of fluid flow and diffusion in geological fractures.

• Advances in aircraft and spacecraft science
• /
• 제8권4호
• /
• pp.345-372
• /
• 2021

The analysis of nonlinear vibrations, buckling, post-buckling, flutter boundary determination and post-flutter behavior of a homogeneous curved plate assuming cylindrical bending is conducted in this article. Other assumptions include simply-supported boundary conditions, supersonic aerodynamic flow at the top of the plate, constant pressure conditions below the plate, non-viscous flow model (using first- and third-order piston theory), nonlinear structural model with large deformations, and application of mechanical and thermal loads on the curved plate. The analysis is performed with constant environmental indicators (flow density, heat, Reynolds number and Mach number). The material properties (i.e., coefficient of thermal expansion and modulus of elasticity) are temperature-dependent. The equations are derived using the principle of virtual displacement. Furthermore, based on the definitions of virtual work, the potential and kinetic energy of the final relations in the integral form, and the governing nonlinear differential equations are obtained after fractional integration. This problem is solved using two approaches. The frequency analysis and flutter are studied in the first approach by transferring the handle of ordinary differential equations to the state space, calculating the system Jacobin matrix and analyzing the eigenvalue to determine the instability conditions. The second approach discusses the nonlinear frequency analysis and nonlinear flutter using the semi-analytical solution of governing differential equations based on the weighted residual method. The partial differential equations are converted to ordinary differential equations, after which they are solved based on the Runge-Kutta fourth- and fifth-order methods. The comparison between the results of frequency and flutter analysis of curved plate is linearly and nonlinearly performed for the first time. The results show that the plate curvature has a profound impact on the instability boundary of the plate under supersonic aerodynamic loading. The flutter boundary decreases with growing thermal load and increases with growing curvature.

• Structural Engineering and Mechanics
• /
• 제86권2호
• /
• pp.167-180
• /
• 2023

This work applies a four-known quasi-3D shear deformation theory to investigate the bending behavior of a functionally graded plate resting on a viscoelastic foundation and subjected to hygro-thermo-mechanical loading. The theory utilizes a hyperbolic shape function to predict the transverse shear stress, and the transverse stretching effect of the plate is considered. The principle of virtual displacement is applied to obtain the governing differential equations, and the Navier method, which comprises an exponential term, is used to obtain the solution. Novel to the current study, the impact of the viscoelastic foundation model, which includes a time-dependent viscosity parameter in addition to Winkler's and Pasternak parameters, is carefully investigated. Numerical examples are presented to validate the theory. A parametric study is conducted to study the effect of the damping coefficient, the linear and nonlinear loadings, the power-law index, and the plate width-tothickness ratio on the plate bending response. The results show that the presence of the viscoelastic foundation causes an 18% decrease in the plate deflection and about a 10% increase in transverse shear stresses under both linear and nonlinear loading conditions. Additionally, nonlinear loading causes a one-and-a-half times increase in horizontal stresses and a nearly two-times increase in normal transverse stresses compared to linear loading. Based on the article's findings, it can be concluded that the viscosity effect plays a significant role in the bending response of plates in hygrothermal environments. Hence it shall be considered in the design.

• 한국지진공학회논문집
• /
• 제28권4호
• /
• pp.183-191
• /
• 2024

Accurate seismic vulnerability assessment requires high quality and large amounts of ground motion data. Ground motion data generated from time series contains not only the seismic waves but also the background noise. Therefore, it is crucial to determine the high-pass cut-off frequency to reduce the background noise. Traditional methods for determining the high-pass filter frequency are based on human inspection, such as comparing the noise and the signal Fourier Amplitude Spectrum (FAS), f² trend line fitting, and inspection of the displacement curve after filtering. However, these methods are subject to human error and unsuitable for automating the process. This study used a deep learning approach to determine the high-pass filter frequency. We used the Mel-spectrogram for feature extraction and mixup technique to overcome the lack of data. We selected convolutional neural network (CNN) models such as ResNet, DenseNet, and EfficientNet for transfer learning. Additionally, we chose ViT and DeiT for transformer-based models. The results showed that ResNet had the highest performance with R² (the coefficient of determination) at 0.977 and the lowest mean absolute error (MAE) and RMSE (root mean square error) at 0.006 and 0.074, respectively. When applied to a seismic event and compared to the traditional methods, the determination of the high-pass filter frequency through the deep learning method showed a difference of 0.1 Hz, which demonstrates that it can be used as a replacement for traditional methods. We anticipate that this study will pave the way for automating ground motion processing, which could be applied to the system to handle large amounts of data efficiently.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권2호
• /
• pp.138-145
• /
• 2017

본 연구는 고강도 철근이 배근된 철근콘크리트 전단벽체 실험체에 대하여 균열의 발생에서부터 철근의 항복과 콘크리트의 파쇄에 이르는 전반적인 거동 특성과 함께 내진성능 평가 예측을 위한 합리적인 해석적 방안을 마련하는 것을 목표로 한다. 1.0의 일정한 형상비를 갖으며 각 방향으로 철근비와 항복강도, 배근상세, 콘크리트 설계 강도, 단부형상 및 단부 횡구속 후프(Hoop) 여부 등을 주요 변수로 갖는 총 8개의 실험체를 검증 대상으로 선정하여 기존에 저자 등에 의해 새로이 수정된 구성관계식을 적용한 비선형 유한요소해석 프로그램(RCAHEST)을 통한 해석을 수행하였다. 실험과 해석으로부터의 최대 하중 및 이에 대응되는 변위에 대한 평균과 변동계수는 각각 1.05와 8% 및 1.17과 19% 정도로 예측하였다. 모든 실험체에 대한 파괴모드와 파괴시까지의 전반적인 거동 특성 역시 비교적 적절히 예측하고 있음을 확인하였으며 이러한 연구결과들은 향후, 고강도 철근의 적용과 관련된 국내외 설계기준에의 적용을 위한 기초자료로 활용될 수 있을 것으로 기대된다.

• 한국지반공학회지:지반
• /
• 제14권5호
• /
• pp.129-142
• /
• 1998

본 연구에서는 파괴강도이내의 일정하중 상태에서 장기적으로 진행되는 연약지반의 침하특성을 파악하기 위하여 Creep 변형성분을 고려한 구성방정식을 유도하고, 유한요소해석 프로그램을 개발하여 이를 바탕으로 토공구조물의 장기적인 변형을 합리적으로 예측함으로서 연약지반상 토공구조 물의 설계 및 시공관리에 기여하고자 하였다. 점성토의 탄.소성거동을 표현하기 위해 Modified Cam Clay모델이 사용되었으며, Creep변형을 계산하는데 있어서는 체적 Creep요소를 고려할 경우 2차 압밀계수 C,를 적용하였고, 축차 Creep요소를 고려할 경우 Singh & Mitchel Creep경험식을 통한 m, a, A 상수를 이용한 것으로 개발된 프로그램의 신뢰성을 검증하기 위하여 이론해 및 실험치와 비교하였고, 적용된 각 상수들의 민감도 를 분석한 결과, 개발된 프로그램은 적용성이 좋은 것으로 판단되었다. 또한 국내외 2개의 현장에 적용한 결과, 제방의 변형해석에 있어 Creep을 고려하지 않은 경우보다 Creep을 고려한 경우가 오차가 적게 나타나고 체적 Creep만을 고려한 경우는 약간 과소평가되 고 축차 Creep까지 고려한 경우는 약간 과대평가됨을 알 수 있었다. 따라서 Creep정수를 얻기 위한 실험기의 개발, 적정 토질정수의 선택 등 향후에도 지속적인 연구가 요구된다.