• 한국식품영양과학회지
• /
• 제44권9호
• /
• pp.1407-1413
• /
• 2015

본 연구는 '고운' 품종으로 제조한 감자가루 분산액의 농도(3, 4, 5, 6, 7%, w/w)에 따른 유변학적 및 페이스팅 특성에 대하여 평가하였다. 감자가루 분산액은 전단담화 거동(n=0.41~0.55)을 나타냈으며, 감자가루 농도가 증가함에 따라 점조도 지수(n), 겉보기 점도(${\eta}_{a,100}$), Casson 항복응력(${\sigma}_{oc}$)값이 증가하는 경향을 나타내었다. 또한 동적 점탄 특성 측정 결과에 의하면 감자가루 분산액은 약한 겔과 같은 거동을 보여주었으며 G'과 G" 값들은 감자가루 농도와 진동수(${\omega}$)가 증가함에 따라 증가하는 경향을 나타내었다. Cox-Merz 중첩원리는 감자가루 분산액에 잘 적용되지 않았다. RVA에 의한 페이스팅 특성은 감자가루 농도가 증가할수록 peak viscosity, trough viscosity, final viscosity, set back viscosity, break down viscosity 값이 유의적으로 증가하였다.

• 접착 및 계면
• /
• 제18권3호
• /
• pp.109-117
• /
• 2017

본 연구에서는 poly(N-vinyl carbazole) (PVK), poly(4-vinylpyridine) (PVP), PVK-b-PVP 블록 공중합체를 RAFT 중합법으로 합성하였으며, 이를 이용하여 ethanol, N-methyl-2-pyrrolidone (NMP), dichloromethane (DCM), tetrahydrofuran (THF)와 같은 비 수계 용매에서 그래핀 분산액을 제조하였다. 합성된 고분자의 화학적 구조는 양성자 및 탄소 핵자기 공명 분광기($^1H-$, $^{13}C-NMR$), 크기 배제 크로마토그래피 (size exclusive chromatography, SEC), 시차 주사 열량계 (differential scanning calorimetry, DSC)를 이용하여 분석하였으며, 그래핀 분산액의 분산 안정성은 Turbiscan을 이용하여 시간에 따른 터비스캔 안정성 지수(Turbiscan stability index, TSI)를 측정, 정량적으로 평가하였다. 용매, 고분자, 그래핀의 표면장력(${\sigma}$), 용해도 상수(${\delta}$)를 이용하여 물질간의 상호작용에 대하여 설명하였으며, 이를 바탕으로 용매와 그래핀간의 용해도와 표면장력의 차이가 분산안정성에 큰 영향을 미침을 확인하였다. 그래핀의 분산 안정성이 좋지 못한 ethanol 및 THF 용매 하에서 PVK-b-PVP를 사용하여 그래핀을 분산시킬 경우 낮은 TSI값을 효과적으로 유지할 수 있었으며, 그래핀을 잘 분산시킨다고 알려진 NMP에 비하여 DCM이 더 좋은 그래핀 분산안정성을 보임을 확인하였다.

• 폴리머
• /
• 제35권4호
• /
• pp.277-283
• /
• 2011

고체분산체는 난용성 약물의 용출률 개선을 위한 방법으로 주로 사용된다. 난용성 약물인 프란루카스트를 플라스돈 S-630과 함께 분무건조하여 고체분산체를 제조하였다. pH에 따른 프란루카스트 용해도 실험을 실시하여 높은 pH에서 약물의 용해도가 높게 나왔다. 입도 분석으로 고체분산체 내의 약물의 크기가 나노 크기로 작아진 것을 확인하였다. 표면전위를 측정하여 고체분산체가 음전하를 가지고 있는 것을 확인하였다. 주사전자현미경으로 고체분산체의 표면이 구형임을 확인하였고, 시차주사열량계와 X-선 회절 분석법을 통해 고체분산체가 무정형임을 확인하였다. 고체분산체의 용출특성을 알아보기 위해 인공장액(pH 6.8)에서 용출거동을 확인하였고, 대조실험을 위해 시판제인 오논$^{(R)}$캡슐을 사용하였다. 이 결과로 분무건조를 통한 고체분산제의 제조를 통해 난용성 약물의 용출특성을 확인하였고, 경구용 약제학적 형태를 가질 수 있는 것을 확인하였다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 제13회 정기총회 및 2002년도 동계학술발표회
• /
• pp.34-35
• /
• 2002

• 설비공학논문집
• /
• 제17권11호
• /
• pp.1060-1071
• /
• 2005

Passive gas dispersions over a 1/1000 scale terrain model at Eiffel type wind tunnel were reproduced by numerical simulation. Large eddy simulation was used to treat the sub-grid scale turbulences. The terrain features were represented by millions of point forces densely distributed over the solid surface using the virtual boundary method. The model simulations agreed very well with the experiments in a consistent fashion for all wind directions. The measured profiles of the wind speeds as well as the tracer gas concentrations were nicely simulated by the CFD model at most locations scattered over the model terrain. With scale factor adjusted and the thermal stratification effects incorporated, the CFD model was expected to provide reliable information on pollutant dispersions over the real complex terrains.

• 한국식품영양과학회지
• /
• 제23권5호
• /
• pp.822-826
• /
• 1994

Effects of concentration(6-9%, db) , heating temperature (80-95$^{\circ}C$), cooking time (10-50min) and heating method (continuous and instantaneous) on the apparent viscosity of cowpea sediment dispersions at 6$0^{\circ}C$ were investigated. The instantaneous heating resulted in higher apparent viscosity than continuous heating regardless concentrations and heating temperatures. The activation energy of the increase rate constant of the apparent viscosity was about 8 kcal/mole. The apparent viscosity of the cowpea sediment dispersion heated to 95$^{\circ}C$ and held for 20 min showed a linear relation with the 20 min height at 92.5$^{\circ}C$ by viscoamylograph.

• Macromolecular Research
• /
• 제15권1호
• /
• pp.22-30
• /
• 2007

High water vapor permeable coating materials were prepared by blending aqueous poly(vinyl alcohol) (PVA) solution with waterborne polyurethane-urea (WBPU) dispersions synthesized by prepolymer mixing process. Stable WBPU/PVA dispersions were achieved at PVA content below 30 wt%. As the water soluble polymer PVA content increased, the number and density of total micro-pores (tunnel-like/isolated micro-pores) formed after the dissolution of PVA in water increased, and the water vapor permeability of coated Nylon fabric also increased significantly. Using WBPU/water soluble polymer PVA blends as a coating material and then dissolving PVA in water was confirmed to be an effective method to obtain prominent breathable fabrics.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.201-206
• /
• 2002

The purpose of this study is to improve the anti-corrosive properties of coated reinforcing bar using polymer cement slurry. Poymer cement slurry are prepared with three types of polymer dispersions and corrosion inhibiting admixture. And tested for corrosion accelerating tests such as immersion in NaCl 10% solution NaCl 10% solution spray, high temperature and pressure steam in condition of 8cycles, carbonation before and after, penetration of NaCl solution. From the test results, it is concluded that the anti-corrosive properties are considerably improved by coating using polymer cement slurry at surface of reinforcing bar. And this trend is marked by adding of corrosion inhibiting admixture. The difference of the anti-corrosive properties is hardly recognized according to types of polymer dispersions. The anti-corrosive properties of coated reinforcing bar using polymer foment slurry are improved to a great extent compared to those of plain reinforcing bar accordiy to increasing content of chloride ion in cement concrete.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.230-230
• /
• 2006

Density functional theory (DFT) calculations using the B3LYP hybrid functional and the 6-311++G(d,p) basis set have been performed to predict the wavelength dispersion of optical absorbance and refractive indices for organic compounds and polymers in the range between the vacuum UV (${\sim}157\;nm$) and near-IR (${\sim}850\;nm$). The DFT calculations can reproduce the experimental dispersions of absorbance and refractive indices with high accuracy and low costs. The calculated dispersions demonstrate that the judicious introductions of $-F\;and\;-CF_{3}$ into alicyclic and heterocyclic compounds are effective in reducing the absorption at shorter wavelengths. In addition, the calculated Abbe numbers that represent the refractive index dispersion in the visble region are linearly proportional to the calculated refractive indices at 589 nm.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.133-134
• /
• 2006

In contrast to paints, the surface appearance of adhesive materials is of minor importance, because the adhesive is invisible between the two substrates. Therefore, the rheological properties needed to apply an adhesive dispersion by spray coating can be quite different. The influence of three different kinds of thickeners on the spraying behaviour of polyurethane adhesive dispersions was investigated. The associative thickener showed only minor changes, whereas the higher molecular weight soluble thickeners dramatically changed the spraying angle and the amount of overspray. Determination of the elongational viscosity by means of the CaBER rheometer proved to be of limited use for thickened dispersions.