• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.137-138
• /
• 2020

The purpose of this study is to evaluate the absorption ratio reduction of recycled coarse aggregate for concrete coated by polymer dispersions. The surface of recycled coarse aggregate is treated by polymer dispersion such as SBR and SAE with solid contents of 2%, 5% and 10%. From the test results, The minimum absorption ratio of the coated recycled coarse aggregate is 1.60 times smaller than that of uncoated recycle coarse aggregate. It is apparent that the absorption ratio of recycled coarse aggregate is much more improved by surface coating with polymer dispersions.

• Journal of The Korean Astronomical Society
• /
• v.34 no.1
• /
• pp.41-45
• /
• 2001

We tested the characteristics of the BOAO Medium Dispersion Spectrograph (MDS) such as the CCD capabilities, wavelength shift by gravity direction variation, slit illumination function and efficiency. Then we calculated the appropriate exposure time to obtain the given S/N ratio for several given magnitudes. Also the remaining problems to be improved were discussed.

• Proceedings of the Korean Statistical Society Conference
• /
• 2003.05a
• /
• pp.109-114
• /
• 2003

The concept of dispersion is intrinsic to the theory and practice of statistics. A formulation of the concept of dispersion can be obtained by comparing the probability of intervals centered about a location parameter, which is peakedness ordering introduced first by Birnbaum (1948). We consider statistical inference concerning peakedness ordering between two arbitrary distributions. We propose nonparametric maximum likelihood estimator of two distributions under peakedness ordering and a likelihood ratio test for equality of dispersion in the sense of peakedness ordering.

• Journal of the Korean Statistical Society
• /
• v.33 no.3
• /
• pp.303-312
• /
• 2004

The concept of dispersion is intrinsic to the theory and practice of statistics. A formulation of the concept of dispersion can be obtained by comparing the probability of intervals centered about a location parameter. This is the peakedness ordering introduced first by Birnbaum (1948). We consider statistical inference concerning peakedness ordering between two arbitrary distributions. We propose non parametric maximum likelihood estimators of two distributions under peakedness ordering and a likelihood ratio test for equality of dispersion in the sense of peakedness ordering.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.2
• /
• pp.218-225
• /
• 1999

Flow visualization study has been conducted to simulate the turbulent dispersion behavior of a crossflow jet physically under the conditions of various thermal stratification in a wind tunnel. A smoke jet with the constant ratio of the jet to freestream velocity is injected normally to the cross flow of the thermally stratified wind tunnel(TSWT) for flow visualization. The typical natures of the smoke dispersion under different thermal stratifications such as neutral, weakly stable, strongly stable, weakly unstable, strongly unstable and inversion layer are successfully reproduced in the TSWT. The Instantaneous velocity and temperature fluctuations are measured by using a cold and hot-wire combination probe. The time averaged dispersion behaviors, the centerline trajectories, the spreading angles and the virtual origins of the cross jet are deduced from the edge detected images with respect to the stability parameter. All the general characteristics of the turbulent dispersion behavior reveal that the definitely different dispersion mechanisms are inherent in both stable and unstable conditions. It is conjectured that the turbulent statistics obtained in the various stability conditions quantitatively demonstrate the vertical scalar flux plays a key role in the turbulent dispersion behavior.

• Journal of Powder Materials
• /
• v.25 no.5
• /
• pp.395-401
• /
• 2018

The improvement of dispersion stability for the primary polishing slurry in a CMP process is achieved to prevent defects produced by agglomeration of the slurry. The dispersion properties are analyzed according to the physical characteristics of each silica sol sample. Further, the difference in the dispersion stability is confirmed as the surfactant content. The dispersibility results measured by Zeta potential suggest that the dispersion properties depend on the content and size of the abrasive in the primary polishing slurry. Moreover, the optimum ratio for high dispersion stability is confirmed as the addition content of the surfactant. Based on the aforementioned results, the long-term stability of each slurry is analyzed. Turbiscan analysis demonstrates that the agglomeration occurs depending on the increasing amount of surfactant. As a result, we demonstrate that the increased particle size and the decreased content of silica improve the dispersion stability and long-term stability.

• Journal of the Korea Society for Simulation
• /
• v.28 no.3
• /
• pp.83-89
• /
• 2019

This research describes quantitative effects of initial dispersion conditions upon the dispersion randomness of Magnus rotor bomblets. Ratios of the missile spin rate to the missile velocity, a, flight path angles, ${\gamma}$ and altitudes, h, were changed to investigate their effects on dispersion randomness. Dispersion was analyzed through calculation of 6 degree of freedom motion equation with aerodynamic coefficients from wind tunnel experiments. In order to analyze the randomness, regression analysis is adopted to calculate the coefficient of determination. The optimized ratio of the missile spin rate to the missile velocity and flight path angle were obtained and the dispersion altitudes had more effect on the dispersion diameter and had less effect on dispersion than other parameters.

• Journal of ILASS-Korea
• /
• v.20 no.2
• /
• pp.101-106
• /
• 2015

Gas leakage and dispersion in the underground LNG power plant can lead to serious fire and explosion accident. In this study, computational fluid dynamics simulation was applied to model the dynamic process of gas leakage and dispersion phenomena in a closed space. To analyze the risk assessment factor, such as the flammable volume ratio, transient simulations were carried out for different scenarios. The simulation results visualized the gas distribution with time in the closed space. The flammable volume ratio was introduced for quantitative analysis the fire/explosion probability.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.1011-1016
• /
• 2001

The purpose of this study is to find out the effect of polymer glass transition temperature on mechanical properties of polymer latex-modified mortars in comparison with ordinary cement mortar. The Polymer latex-modified mortars are prepared with 5, 10, 15 and 20% of polymer cement ratio respectively, and properties of modified mortars such as air content, compressive, flexural and tensile strengths are tested. The test results indicate that the types of polymer dispersion and the polymer-cement ratio are very important factors to characterize the properties of polymer-modified mortars, and also the glass transition temperature of polymer dispersions has an important effect on the performance of polymer-modified mortars. The modifying effects of two kinds of polymer dispersion, St/BA-1 and SBR, are evaluated.

• Proceedings of the KIEE Conference
• /
• 2008.05a
• /
• pp.185-186
• /
• 2008

Use of the carbon nanotube is superior to general powder state materials of dispersion property. Because its ratio of diameter and length(aspect ratio) is very large, it has been known as a type of ideal nano-reinforcement composite. It used solution mixing method for specimen fabrication. To research dispersion property, we used FE-SEM(Field Emission Scanning Electron Microscope) and AFM(Atomic Force Microscope). As a result, this tendency confirms new conductivity network in which the carbon nanotube between carbon black constitute molecules shows a bond by similar constructive property.