• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.525-525
• /
• 2013

Low temperature plasma diagnosis is one of the big issues in laboratory scale or processing industry. One of the most powerful techniques of plasma diagnostics is the use of the scattering of electromagnetic radiation from the plasma. Electron temperature and density are important parameters for understanding the information of plasmas in the plasma processing industry. Laser scattering experiments on plasma can provide a substantial amount of information about plasma parameters such as the electron density ne, the electron temperature Te, and the neutral density nn and temperature Tn. Thomson scattering spectroscopy is used several method, in accordance with detector type. Commonly, Thomson scattering is used several notch filter to separate expanded wavelength. Since using a spectrometer with surface relief grating or notch filter, the system of the measurement will be complicated and bigger. In this study, using VPHG (Volume Phase Holographic Grating) in order to install the simple and cheap system. VPHG has the advantage of the system installation, because it can be Transmission Type. The diffraction efficiency and dispersion angle of VPHG is higher than the surface relief grating relatively. For a wavelength and bandwidth selection, Using a slit or mask to select a rejection wavelength instead of notch filter.

• 한국분말재료학회지
• /
• 제25권4호
• /
• pp.322-326
• /
• 2018

The hydrogen reduction behavior of $MoO_3-CuO$ powder mixture for the synthesis of homogeneous Mo-20 wt% Cu composite powder is investigated. The reduction behavior of ball-milled powder mixture is analyzed by XRD and temperature programmed reduction method at various heating rates in Ar-10% $H_2$ atmosphere. The XRD analysis of the heat-treated powder at $300^{\circ}C$ shows Cu, $MoO_3$, and $Cu_2MoO_5$ phases. In contrast, the powder mixture heated at $400^{\circ}C$ is composed of Cu and $MoO_2$ phases. The hydrogen reduction kinetic is evaluated by the amount of peak shift with heating rates. The activation energies for the reduction, estimated by the slope of the Kissinger plot, are measured as 112.2 kJ/mol and 65.2 kJ/mol, depending on the reduction steps from CuO to Cu and from $MoO_3$ to $MoO_2$, respectively. The measured activation energy for the reduction of $MoO_3$ is explained by the effect of pre-reduced Cu particles. The powder mixture, hydrogen-reduced at $700^{\circ}C$, shows the dispersion of nano-sized Cu agglomerates on the surface of Mo powders.

• 한국수산과학회지
• /
• 제36권6호
• /
• pp.749-756
• /
• 2003

Hydroacoustic and open-closing zooplankton net survey were conducted to understand the characteristics of the sound scattering layer (SSL) and to estimate the density of an euphausiid (Euphausia pacifica) in the SSL, in the northwestern part of the East China Sea. The survey was carried out during July 6-9 2002 at 8 sampling stations for zooplankton. The virtual echogram technique was used to identify E. pacifica from all acoustic scatters. Mean volume backscattering strength difference $(MVBS_{120kHz-38kHz})$ and target strength equation for E. pacifica were derived from the Distorted-wave Born Approximation (DWBA) model. Although vertical migration of the SSL is similar to the general pattern, dispersion at night shows some differences. Estimated mean density using acoustic data ranged from $20.4-221.4\;mg/m^3$ over the whole depth, and $87.1-553.5\;mg/m^3$ in the SSL. The density using the zooplankton net ranged from $0.2-362.4\;mg/m^3$ and was not related to net deploying method. The results from the acoustic and net survey suggest that E. pacifica might be an important zooplankton community in the northwestern part of the East China Sea.

• Journal of Ginseng Research
• /
• 제34권1호
• /
• pp.23-29
• /
• 2010

This study examined the biological characteristics of the insect and examined potential cultural controls using peduncle topping methods. Ginseng stem fungus gnat eggs hatched after 5 days; ecdysis lasted 3-4 weeks, and after 5 days pupation, adults emerged. Adults deposited eggs 1-2 days after emerging, and the entire life cycle lasted 32-40 days. The fungus gnats laid eggs $327\times220{\mu}m$ in size on cut planes of stems, but not on intact stem parts that had not been topped or wounded. Analyses of major weather data for the experimental areas and weather data for the past 30 years acquired from the Korea Meteorological Administration revealed that fungus gnat dispersion was prevalent under highly humid conditions and in areas with thick and frequent fogging. Among the topping times examined, fungus gnat damage to ginseng was lowest when topping occurred in late May. Among the five different topping methods evaluated on experimental ginseng farms, the cumulative fungus gnat damage to ginseng was low (0.8%) under partial peduncle topping (removal of peduncle with lateral fruit remaining) and removal of only flower buds (0.6%), with fungus gnat control effects of 82% and 86%, respectively, compared to conventional topping (removal of peduncle about 5 cm above its base). No fungus gnat damage to ginseng was observed under the no-topping treatment. These results suggest that partial topping of peduncles, while letting lateral fruits remain, is a potentially environmentally friendly method of controlling the ginseng stem fungus gnat.

• Elastomers and Composites
• /
• 제47권3호
• /
• pp.238-245
• /
• 2012

천연 흑연으로부터 Graphene oxide(GO)를 합성한 후 diisocyanatodicyclohexylmethane($H_{12}MDI$)를 이용하여 GO의 표면을 기능화하였고, hydrazine monohydrate에 의한 환원을 통해 isocyanate-graphene sheet(i-RGO)를 얻었다. 폴리우레탄과 적합한 나노복합체를 형성하기 위하여 GO, i-RGO, 천연흑연 및 열적환원된 graphene을 서로 비교분석하였으며, i-RGO가 가장 적합한 나노충전제로 선정되었다. 선정된 i-RGO의 함량에 따른 폴리우레탄의 물성 향상을 확인하기 위하여 충전제의 함량을 다르게 하여 PU/i-RGO 나노복합체를 합성하였다. 물성 평가에서, i-RGO의 함량이 증가할수록 열적 안정성, 경도 및 접촉각(발수력)이 향상되었는데, 이는 i-RGO의 물성 특성 및 가교점 작용에 기인한 것으로 판단되었다. 다만, 인장강도와 신장률의 경우 함량이 4 wt%를 넘어갈 경우 오히려 물성이 감소하는 것을 확인할 수 있었는데, 이는 과량의 가교점 형성이 원인인 것으로 해석되었다.

• 폴리머
• /
• 제37권5호
• /
• pp.579-586
• /
• 2013

용액 삽입법을 이용하여 다양한 함량의 사포나이트(SPT) 점토를 포함한 폴리(비닐 알코올)(poly(vinyl alcohol), PVA) 나노 복합체 필름을 제조하였다. SPT를 0에서 10 wt%까지 첨가한 PVA 나노 복합체 필름들의 열적 특성, 모폴로지, 광학 투명성 및 기체 투과성에 대해 조사하였다. 특히 5 wt% SPT 포함한 PVA 복합체 필름이 매우 우수한 열적 특성과 기체 차단성을 나타내었다. 5 wt% SPT 포함된 복합체 필름을 연신율에 따라 150에서 250%까지 이축 연신하였고, 이축 연신율에 따른 점토 분산성, 광학적 특성 및 기체 투과성에 대한 조사를 하였다. 다양한 비로 이축 연신한 PVA 나노 복합체 필름은 우수한 광학 투명성과 산소 차단성을 보였다.

• 한국정보통신학회논문지
• /
• 제18권7호
• /
• pp.1757-1763
• /
• 2014

채널당 속도 10 Gb/s 인 8개의 NRZ 포맷을 가지는 파장다중화 광신호를 장거리 전송 링크에 적용시켜 720 km 를 전송하였다. 반복되는 링크구간은 80 km 단일모드광섬유, 완전 구간보상을 위한 분산보상광섬유, 어븀첨가 광섬유 증폭기들로 구성되었다. 전송 링크 구현을 위해 반복루프 실험 방법이 적용되었고 반복루프의 구조에 따른 신호 성능 차이가 조사되었다. 파장별 이득 평탄화는 고가의 평탄화 필터를 사용하지 않고 증폭기들의 이득 기울기를 서로 역으로 배치하여 구현하였다. 720 km 전송 후에 평균적인 OSNR 값은 22 dB 였고, 채널별로 OSNR 값의 최고 편차는 9.7 dB 였다. 이득 편차의 주원인은 Hole burning 효과에 의한 것임을 광스펙트럼 조사를 통해 확인했으며, 이득평탄화 필터 없이도 560 km 전송이 가능함을 확인했다.

• 한국전기전자재료학회논문지
• /
• 제31권7호
• /
• pp.455-461
• /
• 2018

Boron nitride (BN) nanofibers were fabricated using BN nanoparticles (70 nm) by electrospinning. Morphologies such as the diameter and density of the BN nanofibers are strongly influenced by the viscosity and dispersion state of the precursor solution. In this study, the precursor solution was prepared by ball milling BN nanoparticles and polyvinylpyrrolidone (PVP, Mw~1,300,000) in ethanol, which was electrospun and then calcined to produce BN fibers. High-quality BN nanofibers were well fabricated at a BN concentration of 15 wt% with their diameters in the range of 500 nm to 800 nm; the viscosity of the precursor solution was $400mPa{\cdot}S$. The calcination of the as-electrospun BN fibers seemed to be completed by holding them at $350^{\circ}C$ for 2 h considering the TGA data. The morphologies and phases of the BN fibers were investigated by scanning electron microscopy (SEM) and X-ray diffractometry (XRD), respectively; Fourier transform infrared (FT-IR) was also used for structure analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2038-2040
• /
• 2000

The main objective of this paper is to design and test a new type of polymer ZnO surge arrester for AC power system of railroad vehicles. Metal oxide surge arrester for most electric power system applications, electric train and subway are now being used extensively to protect overvoltage due to lightning. Surge arresters with porcelain housing must not have explosive breakage of the housing to minimize damage to other equipment when subjected to internal high short circuit current. When breakdown of ZnO elements in a surge arrester occurs due to flashover, fault short current flows through the arrestor and internal pressure of the arrester rises. The pressure rise can usually be limited by fitting a pressure relief diaphragm and transferring the arc from the inside to the outside of the housing. However, there is possibility of porcelain fragmentation caused by the thermal shock, pressure rise. etc. Non-fragmenting of the housing is the most desired way to prevent damage to other equipment. The pressure change which is occurred by flashover become discharge energy. This discharge energy raises to damage arrester housing and arrester housing is dispersed as small fragment. Therefore, the pressure relief design is requested to obstruct housing dispersion. The main research works are focused on the structure design by finite element method, pressure relief of module, and studies of performance of surge arrester for electric railway vehicle.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권10호
• /
• pp.894-898
• /
• 2016

Solution plasma is a unique method which provides a direct discharge in solutions. It is one of the promising techniques for various applications including the synthesis of metallic/non-metallic nanomaterials, decomposition of organic compounds, and the removal of microorganism. In the context of nanomaterial syntheses, solution plasma has been utilized to produce carbon nanoparticles and metallic-carbon nanoparticle systems. The main purpose of this study was to synthesize nickel nanoparticles embedded in a matrix of carbon particles by solution plasma in one-step using waste vegetable oil as the carbon source. The experimental setup was done by simply connecting a bipolar pulsed power generator to nickel electrodes, which were submerged in the waste vegetable oil. Black powders of the nickel nanoparticles-embedded carbon (NiNPs/Carbon) particles were successfully obtained after discharging for 90 min. The morphology of the synthesized NiNPs/Carbon was investigated by a scanning electron microscope, which revealed a good dispersion of NiNPs in the carbon-particle matrix. The X-ray diffraction of NiNPs/Carbon clearly showed the co-existence of crystalline Ni nanostructures and amorphous carbon. The crystallite size of NiNPs (through the Ni (111) diffraction plane), as calculated by the Scherrer equation was found to be 64 nm. In addition, the catalytic activity of NiNPs/Carbon was evaluated by cyclic voltammetry in an acid solution. It was found that NiNPs/Carbon did not show a significant catalytic activity in the acid solution. Although this work might not be helpful in enhancing the activity of the fuel cell catalysts, it is expected to find application in other processes such as the CO conversion (by oxidation) and cyclization of organic compounds.