• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.521-523
• /
• 2007

기존의 PCS는 저 출력에서 효율과 전력 품질이 낮은 단점을 가지고 있다. 이로 인하여 발전 사업자용 태양광 발전 인버터로 사용 시 전력 생산량이 떨어지게 된다. 이를 개선하기 위해서, 한 대의 단일 PCS 내에서 두 대의 인버터 스택을 적용, 개별/병렬 운전하여 효율과 전력품질을 향상시키고자 하며, 향후 500kW급 인버터 개발에 기초 기술개발을 위하여 본 논문에서는 50kW급 계통 연계형 병렬 운전 PCS를 개발하였다.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1362-1364
• /
• 2003

Most of PV(Photovoltaic) inverters are utilizing voltage source type. Normally in this type, an input capacitor is connected at the input of a inverter to keep dc voltage constant. However, it does not seem to be well known how to determine the appropriate value of the capacitor. By developing non-linear transient analysis, the author suggest an approach to give a guideline. An Implicit trapezoidal formula was used to do this calculation.

• Proceedings of the KIEE Conference
• /
• 2004.11b
• /
• pp.5-8
• /
• 2004

최근 생활수준의 향상과 정보통신 산업의 급속한 발전으로 인하여 전세계적으로 전력품질에 대한 관심이 높아져, 각종 전력품질 개선장치로부터 최적 공급시스템에 이르기까지 다양한 각도에서 전력품질을 향상하기 위한 연구개발이 수행되고 있으며, 특히 정보통신기기 및 정밀제어기기 등의 보급증가로 전압품질에 대한 관심이 높아져가고 있다. 지금까지 배전계통의 전압관리는 배 전용변전소 ULTC(Under Load Tap Changer)와 고압배전선로의 주상변압기에 의해 조정되어 왔으며 최근에 고압배전선로의 전압강하가 5%를 초과하는 선로에 대한 효율적 전압관리를 위해 선로전압조정장치(SVR- Step Voltage Regulator)가 도입되고 있다. 그러나 배 전용변전소와 고압배전선로의 선로전압 조정장치가 서로 독립적으로 운용되고 있기 때문에 선로전압조정장치의 효율성이 떨어지고 있는 실정이다. 그러므로 본 논문에서는 배 전용변전소와 선로전압조정장치의 ULTC 송출전압의 최적 전압조정을 위한 협조운용 방안을 제시하고자 한다.

• Composites Research
• /
• v.35 no.1
• /
• pp.47-51
• /
• 2022

In order to efficiently control the heat generation of electronic devices, many research has been conducted on thermally conductive composite materials. In this study, milled carbon fiber was dispersed in four solvent to investigate the relationship of carbon fiber alignment according to dispersion by solvents, and carbon fiberreinforced composite material(CFRP) was manufactured using vacuum filtration. To evaluate the arrangement of CFRP the arrangement of the prepared specimen was observed under an optical microscope, and thermal conductivity was measured by Laser Flash Analysis. The Through-plane thermal conductivity of CFRP using NMP and Ethanol was 10.79 W/mK and 10.57 W/mK respectively, which were improved by 218% and 209% compared to the In-plane thermal conductivity. The high viscosity of the solvent greatly affects the shear of the fluid, and it seemed to determine the alignment of the filler.

• Textile Coloration and Finishing
• /
• v.33 no.4
• /
• pp.280-287
• /
• 2021

Generating electricity by using water in many energy harvesting system is due to their simplicity, sustainability and eco-friendliness. Evaporation-driven moist-electric generators (EMEGs) are an emergent technology and show great potential for harvesting clean energy. In this study, we report a transpiration driven electro kinetic power generator (TEPG) that utilize capillary flow of water in an asymmetrically wetted cotton fabric coated with carbon black. When water droplets encounter this textile EMEG, the water flows spontaneously under capillary action without requiring an external power supply. First carbon black sonicated and dispersed well in three different solvent system such as dimethylformamide (DMF), sodiumdedecylbenzenesulfonate (SDBS-anionic surfactant) and cetyltrimethylammoniumbromide (CTAB-cationic surfactant). A knitted cotton/PET fabric was coated with carbon black by conventional pad method. Cotton/PET fabrics were immersed and stuttered well in these three different systems and then transferred to an autoclave at 120 ℃ for 15 minutes. Cotton/PET fabric treated with carbon black dispersed in DMF solvent generated maximum current up to 5 µA on a small piece of sample (2 µL/min of water can induce constant electric output for more than 286 hours). This study is high value for designing of electric generator to harvest clean energy constantly.

• Korean journal of applied entomology
• /
• v.24 no.1 s.62
• /
• pp.1-6
• /
• 1985

The data on the striped rice, borer populations, collected in the four years from 1973 to 1976, was reanalyzed to study the characteristics in the aggregation pattern of the insect larvae in the paddy fields. The distribution pattern of the larvae was well fitted to the negative binomial model in both the first and the second generation. With reference to the Green's coefficient of dispersion estimated, the aggregation of the larvae was categorized into three phases: initial high aggregation, changing, and dispersed stable phase. Except the changing phase, each phase in each generation could be defined by a common k. The phase-change was initiated by the larval dispersal between hills of the rice plants: the larvae of the third stage and those of the fifth stage, for the first and second generation, respectively. The characteristics of the aggregation pattern were stable in the second generation. In the first genaration, the pattern was more or less variable, indicating that the life system of the insect in the first generation was more susceptible to the variations of the external physical factors than that in the second generation.

• Journal of Broadcast Engineering
• /
• v.18 no.2
• /
• pp.215-224
• /
• 2013

With the rising popularity of smart-phones, the supply of Internet protocol television is largely increased and it causes the wireless communication network load to be increased. To overcome such an overloading problem, 3GPP is now working on the standardization of MBMS since LTE Release 6 specification. MBMS has good performance in bandwidth efficiency by sharing the same bandwidth with the mulitple MBMS users having the same content. According to the proposed algorithm, in heterogeneous networks having a dispersed Single-cell MBMS where 3GPP network and Wi-Fi network are mixed, if the number of MBMS users, who are belonging to cells supporting a dispersed Single-cell MBMS, is more than a specified threshold, the MBMS priority policy is operated. Otherwise, the Wi-Fi priority policy is executed. As the simulation results show both the increase of total available bandwidth ratio and the decrease of network usage cost, it is confirmed that the proposed scheme allows the network efficiency to be maximized.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.6
• /
• pp.573-583
• /
• 2005

Fugitive dust, which is emitted in the ambient air without first passing through a stack or duct designed to control flow, is frequently generated by means of wind erosion from storage yards at Pohang Steel Wokrs. The size distribution of fugitive dust is mostly in the range of coarse particulate which is deposited as soon as emitted and less harm to human health; however $20\%$ of fugitive dust contains PM 10 known as one of most harmful airborne pollutant. Consequently, effective control and reduction of fugitive dust is strongly requested by the local society, but it is not easy so far because the generation and dispersion of fugitive dust highly depends on meteorological conditions, and it being occurred for irregularity. This research presented a fugitive dust control system for each meteorological condition by providing statistical prediction data obtained from a statistical analysis on the probability of generating the threshold velocity at which the fugitive dust begins to occur, and the frequency occurring by season and by time of the wind direction that can generate atmospheric pollution when the dispersed dust spreads to adjacent residential areas. The research also built a fugitive dust detection system which monitors the weather conditions surrounding storage yards and the changes in air quality on a real-time basis and issues a warning message by identifying a situation where the fugitive dust disperses outside the site boundary line so that appropriate measures can be taken on a timely basis. Furthermore, in respect to the spraying of water to prevent the generation of fugitive dust from the storage piles at the storage yard, an advanced statistical meteorological analysis on the weather conditions in Pohang area and a case study of fugitive dust dispersion toward outside of working field during $2002\∼2003$ were carried out in order to decide an optimal water-spraying time and the number of spraying that can prevent the origin of fugitive dust emission. The results of this research are expected to create extremely significant effects in improving surrounding environment through actual reduction of the fugitive dust produced from the storage yard of Pohang Steel Works by providing a high-tech warning system capable of constantly monitoring the leakage of fugitive dust and water-spray guidance that can maximize the water-spraying effects.

• Proceedings of the Korean Professional Engineer Association Conference
• /
• 1996.12a
• /
• pp.76-102
• /
• 1996

북한은 전력부족난과 전기품질의 저하로 인하여 주요 생산기업에 지장을 주고 있으며, 노후 발전소의 성능저하도 함께 진행되고 있는 것으로 추정된다. 이에 대한 적절한 대책이 없는 한 그 상황은 더욱 악화될 전망이다. 한반도 에너지 개발기구(KEDO)가 추진하고 있는 경수로 원자력 발전기가 6～7년 후에 준공된다고 해도 이처럼 불안정한 전력계통에 병입되어 원활한 운전이 가능할런지 기대하기 곤란하다. 이러한 실정에서 \circled1 전력부족으로 주파수가 저하될 때 우선 순위가 낮은 부하를 제한하는 자동 부하제한 방식을 포함한 자동 주파수 제어 계통개선 \circled2 기존발전소 성능과 이용을 향상을 위한 재가동(Repowering) 등의 리 엔지니어링 \circled3 가스터빈 복합화력과 열병합발전(Co-generation) 등과 같이 건설기간이 짧고 비용이 적게 들며 송전 설비 건설도 불필요한 분산형 전원의 건설 \circled4 수력발전소와 조력발전소의 건설 \circled5 양수발전 등 전력에너지 저장설비의 개발 \circled6 송전전압격상과 배전방식개선 및 종합전력정보시스템 구축 \circled7 남ㆍ북한 전력계통 내지는 동북아시아 전력계통을 연계하는 평화망사업(Peace Network Project)등의 추진이 경수로 사업에 선행되어야 한다. 특히 러시아, 중국, 한국, 일본의 발전 에너지원 분포와 년간 부하곡선을 고려할 때 동북아시아 전력계통의 연계는 관련국 상호간에 에너지 환경과 경제적 측면에서 상당한 이득과 안정성을 강화해 줄 것이며, 기술발전과 평화공존에 크게 기여 할 것이다. 이를 위하여 관련국의 전력계통연계 전문가들이 참여하는 남\ulcorner북한전력 계통연계연합회(Co-Pia ; Co-rea Power Systems Interconnection Association)와 동북아지역전력 계통연합회(Near Pia=North-Eastern Asia Region Power Systems Interconnection Association)의 구성을 제안하는 바이다. 주요용어(Key Words): 자동주파수 제어(AFC), 리엔지니어링(Re-Engineering), 분산형 전원(Dispersed Generation System), 전력저장(Power Storage), 부하조절기(Load Conditioner), 수요관리(DSM) 연계(Interconnection), 인터시스템(Intersystem), 통합자원계획(IRP), 안전성 강화(Security Enhancement), 전력시장개방(Electricity Free Maket), 통일비용(Unification Expense, Unification Cost), 남ㆍ북한전력계통연계연합회(Co-Pia), 동북아지역전력 계통연계연합회(Nea,-Pia).

• Journal of the Korean Society for Railway
• /
• v.13 no.5
• /
• pp.493-499
• /
• 2010

The next generation domestic high speed railway system is a power dispersed type and uses vector control method for motor speed control. Nowadays, inverter driven induction motor system is widely used. However, recently PMSM drives are deeply considered as a alternative candidate instead of an induction motor driven system due to their advantages in efficiency, noise reduction and maintenance. In this paper, the maximum torque control approach is presented for the IPMSM drives with reluctance torque. The applied control method uses maximum torque control per ampere technique. Simulation programs based on Matlab/Simulink are developed. Finally the designed system is verified by simulation and their characteristics are analyzed by the simulation results.