• The Korean Journal of Food And Nutrition
• /
• v.3 no.1
• /
• pp.57-68
• /
• 1990

In order to obtain the fundamental informations on cellulase of Trichoderma viride QM 9414 for its production and utilization, some physico-chemical properties of the enzyme were reviewed. When T. viride QM 9414 was cultured on wheat bran medium, filter paper-disintegrating and carboxymethyl cellulose-saccharifying activity were increased with the cell growth, and thereafter CMC-saccharifying activity was kept on almost the same leved while filter-paper disintegrating activity was decreased sharply. And B-glucosidase was formed maximally on the late stationary phase of growth. The crude cellulase of cell-free extracts was purified by (NH4)2SO4 fractionation, Sephadex-G 200 column chromatography and DEAE Sephadex A-50 column chromatography. Filter paper-disintegrating, CMC-saccharifying and B-glucosidase activity were purified 10-fold, 47-fold and 38-fold, respectively. The crude enzyme was proved to be a complex of three different enzyme proteins which were showing filter paper-disintegrating, CMC-saccharifying and B-glucosidase activity. The optimal pH of the three enzyme components was alike pH 4.0, and the optimal temperature for CMC-saccharifying, filter paper-disintegrating and B-glucosidase activity were 4$0^{\circ}C$, 45$^{\circ}C$ and 5$0^{\circ}C$ respectively. The Km and Vmax values of CMC saccharifying activity for CMC were 0.485% and 3.10, and the Km and Vmax vallues of B-glucosidase for PNPG were 0.944$\times$10-3M and 0.097, respectively. The Km and Vmax values of filter paper-disintegrating activity for Avicel were determined to be 0.09% and 0.178, respectively. B-Glucosidase activity was competitively inhibited by glucose, and the Ki value for this enzyme was 3.54$\times$10-3M, CMC saccharifying activity was found to be greatly inhibited by cellobiose.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.5
• /
• pp.303-311
• /
• 2008

Highly hydrophobic lubricants including magnesium stearate may hinder water penetration into the tablet core resulting in delayed disintegration of fast disintegrating tablets. Alternative lubricants with equivalent lubricating properties may need to be incorporated into the tablet formulations. Sodium stearyl fumarate, glyceryl behenate and polyethylene glycol were evaluated regarding the tablet ejection energy, mechanical strength and disintegration time using Texture analyzer (TA). Resulting tablets were also compared with different particle sizes of granules and various compression forces. Among the tested lubricants, sodium stearyl fumarate was less sensitive to mixing time and also showed better or competitive tablet properties. During the experiments, TA was found to be very useful tool to investigate the tablet properties.

• Journal of Pharmaceutical Investigation
• /
• v.37 no.5
• /
• pp.275-280
• /
• 2007

A rapidly disintegration famotidine tablet formulation in the oral cavity was developed using microcrystalline cellulose (MCC) and low-substituted hydroxypropyl cellulose (L-HPC), or additionally cropovidone as an internal disintegrant. Effects of disintegrants on the disintegration time in vitro and hardness were evaluated. Average wetting time of the tablets prepared in scale-up manufacturing process was less than 15 sec. Among the formulations tested, the tablet prepared with crospovidone as an internal disintegrant and Emcocel $90M^{(R)}$ as an external disintegrant showed fastest disintegration. These results may suggest that crospovidone and Emcocel $90M^{(R)}$ possessed excellent wetting nature, which result in the rapid disintegration of tablet.

• Journal of ILASS-Korea
• /
• v.18 no.1
• /
• pp.1-8
• /
• 2013

In this paper an experimental study is presented to investigate the dynamic behavior of impacting droplet onto a liquid film. The main parameters are the droplet velocity and the thickness of the liquid film. Photographic images are presented to show the formation of crown, central jet and disintegrating droplet from the central jet. The emphasis is on presenting the time evolution of crown diameter, crown height, central jet height and the size of disintegrating droplet from the central jet. The diameter and height of crown are higher for faster droplet and thinner liquid film. On the other hand, the height of central jet are higher for faster droplet and thicker liquid film. The size of disintegrating droplet from the central jet heavily depends on the droplet velocity; Larger droplet is produced with faster falling droplets.

• Journal of Pharmaceutical Investigation
• /
• v.39 no.6
• /
• pp.445-449
• /
• 2009

According to the statistical data, stroke is about 13.9% of leading causes of death. Some herbal medicines including Paeonia lactiflora, Angelica gigas nakai and Prunus persica, etc., had been reported to be effective in preventing stroke and mBHT (Modified BoyangHwanoTang) was an advanced prescription used in Korean clinics. Orally disintegrating tablets (ODT) is useful for patients suffering from dysphagia, motion sickness, repeated emesis and mental disorders. Further, drugs exhibiting satisfactory absorption through the mucosa intended for immediate pharmacological action could be advantageously formulated in ODT. The aim of this study was to develop the most efficient ODT formulation of mBHT. Corresponding herbal medicines comprising mBHT were extracted with water for 3 hr at 95~$100{^{\circ}C}$ and then dried. mBHT extract was obtained with about 30% of yield. Subsequently, some pharmaceutical excipients such as spray-dried lactose, crospovidone, glyceryl behenate and/or cogrinded-treated arabia gum were used to achieve an immediate disintegration of mBHT ODT in oral cavity. The requirements of ODT with mechanical strength sufficient to stand the rigors of handling and capability of disintegrating within a few seconds in contact with saliva are indispensable. mBHT ODT prepared by the wet granulation method showed a disintegration time of below 30 sec.

• Applied Biological Chemistry
• /
• v.12
• /
• pp.99-105
• /
• 1969

The yield of cellulase derived from Trichoderma $(O_2-1)$ was remarkably varied with various concentration of ethanol and acetone in purification of the enzyme. In the purification with ethanol of ${\beta}-glucosidase$, the best result was obtained in the concentration of 60% and, of CMCase and of filter paper disintegrating enzyme 80%. And in the purification with acetone of ${\beta}-glucosidase$, filter paper disintegrating enzyme, and CMCase, in the concentration of 60%, 80%, and 90% respectively, was shown the best yield. The activities of crude Cellulase preparation could be seperated into few of fractions by column chromatography with Silica gel, Cellulose powder, and gauze. Most of CMCase, avicelase, and ${\beta}-glucosidase$ were eluted, but most of filter paper disintegrating enzyme and the rest of enzymes mentioned the above were absorbed, and were eluted with water. Therefore, it was considered that CMCase is different from filter paper disintegrating enzyme in properties. The relative activity of CMCase was different from that of avicelase in the peak of elusion part. And it was considered that filter paper disintegrating enzyme and cellulose powder saccharifying enzyme was seperated respectively as absorption part and non absorption part. The auther came to the conclusion that at least there were more than three sorts of cellulase in Trichoderma $(O_2-1)$ cellulase preparation.

• Journal of Pharmaceutical Investigation
• /
• v.41 no.1
• /
• pp.51-57
• /
• 2011

The objective of this study was to enhance the utilitization of Ibuprofen (IBU) by introducing the fast-disintegrating tablet (FDT) form. Presently, IBU is being widely used as a tablet or syrup form. But in contrast to these two formulations, IBU as FDT is not only convenient but also increases the control over the time release of the drug, noted by using Alginate beads. This study was carried out with Sodium Alginate and IBU at the ratios of 1:0, 1:0.5, 1:1, and 1:2 in order to produce a series of beads with different ratios. During the drying process of the beads, talc was added in beads to compare the effects with and without the talc. The final product was scanned with SEM imaging to determine the difference in the surface of the beads. The parameters assessed were the diameter, content assay, dissolution test and effectiveness of time-release. Direct compression method was used to prepare FDT containing IBU bead. The properties of FDT, such as hardness, disintegration time, were investigated. The dissolution profiles of FDT were tested using KP dissolution apparatus 1 (basket method). The results suggest addition of talc and drying the beads made the surface smooth and less vulnerable to clutter into chunks. The size of beads was less than 300 ${\mu}m$ which did not create a sandy feeling in the mouth. Thus, the beads formulation model made the sustained release of the drug possible, the hardness of FDT (1.25~1.50 $Kg/cm^2$) was acceptable and all the values of dissolving period were less than 30 seconds. The dissolution profile of FDT was same as that of IBU bead. The efficient dissolution profile and low price of IBU bead containing Sodium Alginate, the FDT formulation prepared from IBU bead can save the expenses and can improve the convenience of application of this drug.

• Korean Journal of Food Science and Technology
• /
• v.54 no.3
• /
• pp.327-333
• /
• 2022

An orally disintegrating film (ODF) based on hyaluronic acid (HA) containing vitamin D was developed. The vitamin D content in the ODF was set based on the adequate intake (AI) of vitamin D from 0 to 10 AI (0, 1, 4, 7, and 10AI). The control (0AI) had the highest thickness and showed the longest disintegration time among the samples. The moisture content of the ODFs was significantly lower in those with vitamin D compared to the control. As the amount of vitamin D increased, the water vapor permeability (WVP) of the ODFs decreased, and the opacity significantly increased. The tensile strength was higher in the films containing vitamin D compared to the control films. However, the elongation at the break showed no significant difference among the films. The vitamin D content in the film was reduced by 25.7-44.2% during processing compared to the amount that was originally added. Based on the above results, a new and convenient vitamin D delivery system, an ODF, could be successfully produced.

• The Korean Journal of Emergency Medical Services
• /
• v.24 no.2
• /
• pp.89-97
• /
• 2020

Purpose: In this study we aimed to manufacture and evaluate an oral disintegrating film containing ibuprofen. Methods: Optimal oral ventilation was manufactured using ibuprofen 3g, polyvinyl alcohol #500 4.2g, HPMC K 100M 1.6g, glycerol 4g, TWEEN #20 0.3g, PEG #20 0.3g, citric acid 0.5g, sucralose 0.1g, ethamol 10mL, and distilled water 30mL. Results: Film mass ranged from 110 to 130mg in all prescriptions, showing general uniformity while the water content ranged from 6 to 12%. Measurement of ibuprofen content in all manufactured film solutions averaged 100.12% (98.0-102.0%). The elution test predicted the time taken from the body and the film agent of all prescriptions was released 100% within 5 minutes to confirm the rapid elution. Conclusion: Based on the results of all test, prescription E was proved to be the most suitable.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.10a
• /
• pp.413-420
• /
• 2011