• International Journal of Contents
• /
• v.12 no.2
• /
• pp.58-65
• /
• 2016

This paper describes design and development of a system that supports continuous creation of hazard maps by local residents in their daily life. We made an interview survey to design our system in a model traditional town in Saga, Japan. The results show that in spite of continuous efforts, many practical problems remain and residents feel unsafe. Based on these results, we designed and developed a unique ICT-based support system which contributes to community-based disaster prevention/reduction. The continuous resident participation and posting design are core concept for our sustainable community-based approach. Our system continues to support making a hazard map by integrating the community-based hazard information. Local residents register information about the spot (disaster types, a risk level, a photograph, comments, positional information) that can be dangerous in case of disaster. We have evaluated the usefulness and possibilities of our prototype system implemented as an iOS application.

• Wind and Structures
• /
• v.26 no.1
• /
• pp.45-56
• /
• 2018

Wind damage of urban trees arises to be a serious issue especially in the typhoon-prone areas. As a family of tree species widely-planted in Southeast China, the structural behaviors of Plane tree is investigated. In order to accommodate the complexities of tree morphology, a fractal theory based finite element modeling method is proposed. On-site measurement of Plane trees is performed for physical definition of structural parameters. It is revealed that modal frequencies of Plane trees distribute in a manner of grouped dense-frequencies; bending is the main mode of structural failure. In conjunction with the probability density evolution method, the fragility assessment of urban trees subjected to wind excitations is then proceeded. Numerical results indicate that small-size segments such as secondary branches feature a relatively higher failure risk in a low wind level, and a relatively lower failure risk in a high wind level owing to windward shrinks. Besides, the trunk of Plane tree is the segment most likely to be damaged than other segments in case of high winds. The failure position tends to occur at the connection between trunk and primary branches, where the logical protections and reinforcement measures can be implemented for mitigating the wind damage.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.55-70
• /
• 2020

This study aims to identify the influence of risk-inducing factors and safety inspection on the measures of reducing accidents among workers of building structures in small construction sites. The result can be summarized as follows: First, as for the influence of risk-inducing factors on human factors, preparation for work, disintegrating molds, taking follow-up measures, and keeping records, have statistically significant influences. Therefore, it can be said that safety inspection has a partial mediating effect in the relationship between risk-inducing factors and human factors. Second, as for the influence of risk-inducing factors on facility factors, preparation for work, and taking follow-up measures influenced significantly. This indicates that safety inspection has a partial mediating effect in the relationship between risk-inducing factors and facility factors. Third, as for the influence of risk-inducing factors on management factors, the installation of shores and risk assessment are found to have significant effects. This shows that safety inspection has a partial mediating effect in the relationship between risk-inducing factors and management factors. Fourth, the influence of risk-inducing factors on work factors was significant only in the installation of shores. This indicates that safety inspection has a completely mediating effect in the relationship between risk-inducing factors and work factors. Finally, in the relationship between risk-inducing factors and accident reduction measures, preparation for work, installation of shores, and taking follow-up measures showed significantly positive influences. In contrast, keeping records has a significant negative influence. Thus, safety inspection has a partial mediating effect in the relationship between risk-inducing factors and management factors.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2015.11a
• /
• pp.261-264
• /
• 2015

본 연구에서는 해안 침식의 원인 중 유역 개발로 인한 해안으로의 표사 공급원이 감소를 검토하고, 그에 따른 표사계의 미래 해안 침식률을 분석하였다. 우리나라 서해의 경우 유역 개발로 인해 하천으로부터의 표사 유입 차단은 심각한 수준이다. 아직 그 영향이 해안으로 완전히 파급되지 못하여 그로 인한 장기 해안 침식이 두드러지지 않고 있다. 또한 피해가 심각해지기 시작하면 돌이킬 수 없는 재앙이 될 측면도 많다. 따라서 본 연구에서는 금강유역을 연구대상지역으로 설정하여 유역 개발로 인한 표사 유입량 감소를 계산하여 주변 표사계 내 미래 해안의 침식률을 산정하였다. 이는 향후 유역개발로 인한 미래 침식 위험 지역의 판단과 침식 위험도 평가 도입시 유용하게 사용될 수 있을 것으로 기대된다.

• Journal of Korean Association for Spatial Structures
• /
• v.23 no.3
• /
• pp.57-69
• /
• 2023

In this study, in order to establish a strategy for developing an fire following earthquake risk assessment method that can utilize domestic public databases(building datas, etc.), the method of calculating the ignition and fire-spread among the fire following earthquake risk assessment methodologies proposed by past researchers is investigated After investigating and analyzing the methodology used in the HAZUS-MH earthquake model in the United States and the fire following earthquake risk assessment methodology in Japan, based on this, a database such as a domestic building data utilized to an fire following earthquake risk assessment method suitable for domestic circumstances (planned) was suggested.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.12
• /
• pp.157-166
• /
• 2019

Globally, various disasters such as typhoons, floods, earthquakes, fires, explosions have caused work to be halted. If there is a large-scale disaster at public institutions in charge of major national affairs and their works are interrupted, not only will there be property damage, but there will also lead to a decline in national credibility and direct and indirect impacts on the people. Therefore, it is necessary to ensure continuity of operation by minimizing the interruption period of critical operations due to disasters. Overseas advanced countries such as the United States and Japan developed guidelines for Continuity of Operation (COOP) to prevent unexpected work disruptions caused by disasters. Recognizing the necessity of COOP in South Korea, a relevant law has been newly established in 「the Framework Act on the Management of Disasters and Safety」 to enable public institutions to establish the COOP in response to this situation. In this study, the definition, the necessity and overseas cases of COOP were investigated and described. Using the templates developed by these results, operational impact analysis, risk assessment, operational continuity strategies and operational continuity procedures were applied to "A" City Hall in Gyeonggi-do province and those results were described. The objective of this study is to substantially contribute to the introduction of COOP to local governments through their pilot application and implications of COOP.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.2
• /
• pp.95-103
• /
• 2019

Safety and welfare of forestry is very poor because of poor working environment, decreasing workforce and budget, and aging. These have brought many accidents and casualties. The accident rate in the field of forestry were about 2.83 times higher than average of an entire industry and mortality rate were 1.84 times higher than it. The most reason among the mortality accident was caught in, under or between objects and struck by objects. In analysis of 60 serious accident cases, the number of occurrence s of caught in, under or between objects and struck by objects were the highest. We suggest education, engineering, environment, and enforcement methods which is first aid education and emergency response system, equipment of combined IoT technologies and sensors, and certification and career program on the basis of the results.

• Journal of the Korean Society of Safety
• /
• v.34 no.4
• /
• pp.111-118
• /
• 2019

Accidents occurring due to natural disasters in chemical process facilities where technologies are concentrated can cause secondary damage. The concept of the relationship between natural disasters and highly intensive technologies has evolved into the Natech (Natural Hazards Triggered Technological Disaster) research. Currently, the number of earthquakes is increasing all over the Korean peninsula. To assess the risk of Natech when an earthquake has occurred in South Korea, the Rapid Natech Risk Assessment Tool (RAPID-N) developed by the European Commission's Joint Research Center (EC JRC) was used in the present study. The RAPID-N can be used for Natech risk assessment based on mapping and can be utilized for sufficient preparation for reduction of the effects of Natech accidents. A total of 261 chemical facilities actually existing in Pohang were initially analyzed to select eight facilities and the Pohang earthquake that occurred in 2017 was implemented in the RAPID-N utilizing the shake map. High risk areas were selected through Natech risk assessments for the selected eight work places and countermeasures for the areas were suggested. High risk areas exist depending on the location, since the damage influence ranges could be overlapped and each chemical facility has an independent probability of Natech. Therefore, studies on Natech emergency plans and emergency evacuation routes should be actively conducted considering such high risk areas. The present study was conducted to demonstrate the feasibility of Natech risk assessment in South Korea through the RAPID-N. These findings can be used as a reference material to lay a foundation for Natech risk assessment and related policies in South Korea.

• Journal of the Korean Institute of Gas
• /
• v.25 no.5
• /
• pp.1-10
• /
• 2021

Semiconductor Photo Resist (PR) automation equipment uses a mixture of several flammable substances, and when it leaks during the process, it can lead to various accidents, therefore, risk assessment is necessary. This study analyzed the frequency of leakage of Acetone and PGMEA used in PR automation equipment and the frequency at which such leakage could lead to a fire accident through the frequency analysis method, and evaluated the need for additional risk reduction measures in the current facility. Based on the process leak data and ignition probability data of IOGP, leak frequency analysis and ignition probability were derived, and the frequency of actual fire accidents was analyzed by combining them. The frequency of material leakage in semiconductor PR process is 7.30E-03/year, and fire accidents can occur by acetone that exists above the flash point when the material is leaked, the frequency was calculated at the level of 1.24E-05/year. According to the UK HSE, for a major accident occurring with a frequency of 1.24E-05/year, it is defined as "Broadly Acceptable", a level that does not require additional measures for risk reduction when it causes 7 or less deaths, and due to the process operated by two people, no additional risk reduction are required.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.4
• /
• pp.33-43
• /
• 2023

The impact of prolonged rainfall, such as during the monsoon season or intense concentrated rainfall over a short period, can lead to mountainous disasters such as landslides and debris flows. These events, such as landslides and debris flows, cause both human and material damage, prompting the implementation of various measures and research to prevent them. In the context of researching debris flow disasters, numerical models for debris flows provide a relatively simple way to analyze the risk in a study area. However, since empirical equations are applied in these models, yielding different results and variations in input variables across models, the validation of numerical models becomes essential. In this study, a numerical model for debris flows was employed to compare and analyze the mitigation effects of facilities such as check dams and water channel work, aiming to reduce the damage caused by debris flows.