• 정보처리학회논문지C
• /
• 제15C권3호
• /
• pp.191-198
• /
• 2008

최근 우리 사회는 인터넷과 네트워크의 발전에 따라 자유롭게 정보를 공유하거나 습득하게 되었다. 그러나 인터넷의 발전으로 인해서 그에 대한 역기능도 나타나게 되었다. 대표적인 역기능이 바로 인터넷 공격이다. 인터넷 공격은 여러 분야에서 많은 피해를 주는데, 특히 경제적인 측면에서의 그 피해는 어마어마하다. 특히 기업의 경우는 이런 경제적인 피해에 민감하다. 그러나 국내에서는 이런 인터넷 공격으로 인한 경제적인 피해를 산정하는 모델에 관한 연구가 미비하다. 따라서 본 논문에서는 인터넷 공격으로 인한 경제적인 측면의 피해를 산출하는 하나의 모델을 제시하고 그 모델의 기준에 따라 가상적인 인터넷 공격의 경제적인 피해를 산정할 것이다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제22권2호
• /
• pp.23-26
• /
• 1999

The Zygomatic arch is structurally protruded and is easily fractured. The classic management of zygomatic arch fracture has been mentioned the Keen, Lothrop, Dingman and Ailing and threaded K-wire. All of the above methods have advantages and disadvantages. To minimize the disadvantages, we performed threaded K-wire for the first time using C-arm image intensifier. The subjects were 16 patients with Knight North group II (Zygomatic arch fracture). Among them the C-arm was used in 12 patients and the operator used sensitivity general method in 4 patients and confirmed the operation by mobile X-ray equipment. In conclusion, both groups were satisfied surgically and cosmetically. Using the C-arm, actual image at the time operation was clear and satisfied, the surrounding tissue damage was minimized and at was more accurately completed. The operation time was shortened by 30 to 60 minutes proving it to be an efficient method. We suggest though that further studies be needed to evaluate the radiation effect on these patients.

• 전력전자학회논문지
• /
• 제12권5호
• /
• pp.378-385
• /
• 2007

AC PDP(Plasma Display Panel)는 소비전력이 크고 유지구동전압이 높다는 단점이 있다. 이런 단점을 개선하기 위하여 에너지 회수회로를 설치하고 유지구동전압을 낮춘 회로가 제안되었다. 그러나 이 회로는 방전유지 구간 시작 시점에서 패널의 전압이 방전유지구동전압보다 낮기 때문에 스위칭소자들이 하드 스위칭 동작을 하는 단점이 있다. 본 논문에서는 CIM(Current Injection Method)을 이용하여 미리 인덕터에 전류를 흘려주어 방전유지 구간 시작 시점에서도 스위칭소자들이 영전압 스위칭동작을 하여 전 구간에서 영전압 스위칭 또는 영전류 스위칭동작을 할 수 있는 새로운 구동방식을 제안한다. 그리고 회로를 해석하여 CIM 구간을 설계하고 시뮬레이션과 실험을 통하여 유용성을 입증하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.129-136
• /
• 2005

The deterministic analysis method has generally used to evaluate the slope stability and it evaluates the slope stability with decision value that is a representative value of design variables. However, one of disadvantages in the deterministic approach is there is not able to consider the uncertainty of soil strength properties, even though it is the biggest influential parameter of the slope stability. On the other hand, the limit state design(LSD) can take a consideration of uncertainties and computes both the reliability index and the probability of failure. LSD method is capable of overcoming the disadvantages of deterministic method and evaluating the slope stability more reliably. In this study, both the mean value and standard deviation of the internal land's representative soil strength properties applied to process the LSD method. The major purpose of this study is to gauge the general applicability of the limit state design in soil slope and to weigh the comparative validity of the proposed partial safety factor. In order to reach the aim of this study, the partial safety factor and resistance factor which totally satisfied the slope's overall safety factor were calculated by the load and resistance safety factor design (LRFD).

• 한국세라믹학회지
• /
• 제34권5호
• /
• pp.473-482
• /
• 1997

Titanium carbide(TiC) has a poor sinterability due to the strong covalent bond. Thus, it is generally fabricated by either hot pressing or pressureless-sintering at elevated temperature by the addition of sintering aids such as nickel(Ni), molybdenum(Mo) and cobalt(Co). However, these sintering methods have the following disadvantages; (1) the complicated process, (2) the high energy consumption, and (3) the possibility of leaving inevitable impurities in the product, etc. In order to reduce above disadvantages, we investigated the optimum conditions under which dense titanium carbide bodies could be synthesized and sintered simultaneously by high pressure self-combustion sintering(HPCS) method. This method makes good use of the explosive high energy from spontaneous exothermic reaction between titanium and carbon. The optimum conditions for the nearly full-densification were as follows; (1) The densification of sintered body becomes high by increasing the pressing pressure from 400kgf/$\textrm{cm}^2$ upto 1200 kgf/$\textrm{cm}^2$. (2) Instead of adding the coarse graphite or activated carbon, the fine particles of carbon black should be added as a carbon source. (3) The optimum molar ratio of carbon to titanium (C/Ti) was unity. In reality, titanium carbide body which were prepared under optimum conditions had relatively dense textures with the apparent porosity of 0.5% and the relative density of 98%.

• 한국전자파학회논문지
• /
• 제21권11호
• /
• pp.1229-1234
• /
• 2010

차세대 이동 통신에서는 고품질, 고속 통신의 멀티미디어 서비스를 요구한다. 이러한 서비스를 만족시키기 위해서는 강력한 오류 정정 기법이 사용된다. ARQ(Auto Repeat Request) 기법은 전송 효율적인 측면, 그리고 FEC(Forward Error Correction) 기법은 높은 신뢰도면에서 취약한 단점을 가지고 있다. 이러한 단점을 서로 보완한 H-ARQ(Hybrid Auto Repeat Request) 시스템이 현재 연구 중에 있다. 따라서 본 논문에서는 cross layer를 이용한 H-ARQ 시스템을 분석하였다. Cross layer coding 기법과 H-ARQ type, 채널 환경에 따라 적합한 H-ARQ 방식을 BER 성능과 전송 효율 분석을 통해 제안한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.852-855
• /
• 2003

Gas-Assisted Injection Molding(GAIM) process, that can be used to provide a hollow shape in a molding, is a variant of the conventional injection molding process. GAIM has many advantages such as reduction of material, sink mark. warpage. and lower injection pressure. Thus, GAIM has been widely applied in the industry to make moldings with a hollow channel such as handles, TV frames and so on. On the other hand, GAIM has some disadvantages such as slow cooling time and flow marks. In the disadvantages, hot gas core causes slow cooling of a molding and the overflow. which is to prevent flow mark. is waste of materials. To solve these problems, we developed a new GAIM system that we called RGIM(Reverse Gas Injection Molding). The RGIM has two special units; one is the overflow buffer, which is used for reduction of a material, and the other tile air unit, which is used for faster cooling of a molding. We conducted an experiment and simulation to verify the efficiency of the RGIM system. Through experiments and simulation, we confirmed the effectively operating of the RGIM system and extracted the optimum process conditions.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.229-233
• /
• 2012

Proton exchange membrane fuel cell (PEMFC) is the most promising energy source for the robot applications because it has unique advantages such as high energy density, no power drop during operating, and easy to make compact size. However, PEMFC has intrinsic disadvantages which are delay to start up and difficulty to correspond drastic load changes. These disadvantages can be compensated by hybrid operating with a Li-poly battery. This study is focus to build and understand the hybrid system for the robot system. In this study, we build the PEMFC hybrid system using EOS-320 PEMFC stack, Li-poly battery and G-Philos FDX1-250BU dc-dc converter. The hybrid system is accurately monitored by CAN and RS485. The system was studied under two conditions such as non-loaded and loaded operating conditions. The results show that the system has delay to start up without hybrid operating and it can be compensated with the hybrid operating.

• 한국발생생물학회지:발생과생식
• /
• 제21권1호
• /
• pp.1-10
• /
• 2017

The use of human mesenchymal stem cells (hMSCs) in cell-based therapy has attracted extensive interest in the field of regenerative medicine, and it shows applications to numerous incurable diseases. hMSCs show several superior properties for therapeutic use compared to other types of stem cells. Different cell types are discussed in terms of their advantages and disadvantages, with focus on the characteristics of hMSCs. hMSCs can proliferate readily and produce differentiated cells that can substitute for the targeted affected tissue. To maximize the therapeutic effects of hMSCs, a substantial number of these cells are essential, requiring extensive ex vivo cell expansion. However, hMSCs have a limited lifespan in an in vitro culture condition. The senescence of hMSCs is a double-edged sword from the viewpoint of clinical applications. Although their limited cell proliferation potency protects them from malignant transformation after transplantation, senescence can alter various cell functions including proliferation, differentiation, and migration, that are essential for their therapeutic efficacy. Numerous trials to overcome the limited lifespan of mesenchymal stem cells are discussed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.771-774
• /
• 2000

RP techniques have inherent disadvantages caused by their working principles: stair-stepped surface of parts due to layer-by-layer stacking of layers, low build speed caused by line-by-line solidification to finish one layer, and post processing to improve surface finish, etc. The objective of this study is to propose a new RP technique, variable deposition manufacturing (VDM), which can make up for the disadvantages of the existing RP techniques, and to develop an apparatus to implement the technique. The proposed process can greatly reduce the building time and improve the surface finish of parts generated. The experiments are carried out to obtain the range of temperature of molten material to maintain its fluidity and to investigate the effect of gas cooling on the preservation of the slopes. Based on the results, some simple shapes such as a line-shape. an S-shape, and a circle-shape were fabricated from Ethylene Vinyl Acetatecopolymer (EVA). In order to examine the applicability of VDM to more general shapes, a tensile specimen and a yo-yo shape were manufactured by the proposed RP method using EVA material as the first trial approach. The present basic study has shown the possibility of a practicable utilization of the proposed VDM process to prototyping of a general three-dimensional shape.