• Progress in Medical Physics
• /
• v.23 no.3
• /
• pp.145-153
• /
• 2012

In this study, we quantify the residual motion artifact in 4D-CT scan using the dynamic lung phantom which could simulate respiratory target motion and suggest a simple one-dimension theoretical model to explain and characterize the source of motion artifacts in 4DCT scanning. We set-up regular 1D sine motion and adjusted three level of amplitude (10, 20, 30 mm) with fixed period (4s). The 4DCT scans are acquired in helical mode and phase information provided by the belt type respiratory monitoring system. The images were sorted into ten phase bins ranging from 0% to 90%. The reconstructed images were subsequently imported into the Treatment Planning System (CorePLAN, SC&J) for target delineation using a fixed contour window and dimensions of the three targets are measured along the direction of motion. Target dimension of each phase image have same changing trend. The error is minimum at 50% phase in all case (10, 20, 30 mm) and we found that ${\Delta}S$ (target dimension change) of 10, 20 and 30 mm amplitude were 0 (0%), 0.1 (5%), 0.1 (5%) cm respectively compare to the static image of target diameter (2 cm). while the error is maximum at 30% and 80% phase ${\Delta}S$ of 10, 20 and 30 mm amplitude were 0.2 (10%), 0.7 (35%), 0.9 (45%) cm respectively. Based on these result, we try to analysis the residual motion artifact in 4D-CT scan using a simple one-dimension theoretical model and also we developed a simulation program. Our results explain the effect of residual motion on each phase target displacement and also shown that residual motion artifact was affected that the target velocity at each phase. In this study, we focus on provides a more intuitive understanding about the residual motion artifact and try to explain the relationship motion parameters of the scanner, treatment couch and tumor. In conclusion, our results could help to decide the appropriate reconstruction phase and CT parameters which reduce the residual motion artifact in 4DCT.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.5
• /
• pp.500-510
• /
• 2008

Statement of problem: Recently researches about WC/C (Tungsten Carbide/Carbon) or TiN (Titanium Nitride) coating on abutment screws are going on. It decreases friction coefficient, resistance against corrosion and withdrawal of physical fragility when the coating is applied to the metal surfaces. It is reported that coated abutment screws improved abrasion, adaptability and detorque force. Purpose: This study is about the effects of coated abutment screws on loosening of screw and for the purpose of solving the loosening phenomenon of abutment screws which is clinical problem. Material and methods: Detorque force and surface changes are compared when 10 times of repeated closing and opening are applied to both uncoated titanium abutment screws (Group A) and coated abutment screws with WC/C (Group B) and TiN (Group C). Each group was made up of 10 abutment screws. Results: 1. Before repeated closing and opening, Somewhat rough surface with regular direction was observed in Group A. Coated granules were observed in group B and group C and overall coated layer appeared in regular and smooth form. 2. Before repeated closing and opening, The coated surface showed bigger and thicker size of coated granules in Group C than Group B. 3. After repeated closing and opening, abrasion and deformation of abutment screw surface was observed in Group A and Group B. Exfoliation phenomenon was observed in Group B. 4. Group A showed biggest range of decrease when the weight changes of abutment screws were measured before and after repeated closing and opening. Group C showed less weight changes than Group B but there was no statistical difference between two groups. 5. Group B and Group C showed higher average detorque force than Group A and there was statistical difference. 6. Group A showed more prominent decrease tendency of average detorque force than Group B and Group C. Conclusion: Coated abutment screws with WC/C or TiN did not show prominent surface changes than uncoated titanium abutment screws even though they were repeatedly used. And they showed excellent resistance against friction and high detorque force. Thus it is considered that adaptation of WC/C or TiN coating on abutment screws will improve the screw loosening problem.

• Korean Security Journal
• /
• no.21
• /
• pp.75-94
• /
• 2009

Since mechanical security systems are mostly composed of electronic, information and communication devices, they have effects in the aspects of overall social environment and crime-oriented environment. Also, the importance is increasing for wireless recognition of RFID and tracing function, which will be usefully utilized in controlling the incomings and outgoings of people/vehicles or allowance, surveillance and control. This is resulting from the increase in the care for the elderly according to the overall social environment, namely, the aging society, and the number of women entering, as well as the increase in the number of heinous crimes. The purpose of this study is to examine the theoretical considerations on ubiquitous sensor network and present a direction for securities companies for their development by focusing on the technological and application areas. To present strategies of response to a new environment for security companies, First, a diversification strategy is needed for security companies. The survival of only high level of security companies in accordance with the principle of liberal market competition will bring forth qualitative growth and competitiveness of security market. Second, active promotion by security companies is needed. It is no exaggeration to say that we are living in the modern society in the sea of advertisements and propaganda. The promotional activities that emphasize the areas of activity or importance of security need to be actively carried out using the mass media to change the aware of people regarding security companies, and they need to come up with a plan to simultaneously carry out the promotional activities that emphasize the public aspect of security by well utilizing the recent trend that the activities of security agents are being used as a topic in movies or TV dramas. Third, technically complementary establishment of ubiquitous sensor network and electronic tag is needed. Since they are used in mobile electronic tag services such as U-Home and U-Health Care, they are used throughout our lives by forming electronic tag environment within safe ubiquitous sensor network based on the existing privacy guideline for the support of mobile electronic tag terminal commercialization, reduction in communication and information usage costs, continuous technical development and strengthening of privacy protection, and the system of cooperation of academic-industrial-research needs to be established among the academic world and private research institutes for these parts.

• Journal of Korea Water Resources Association
• /
• v.47 no.5
• /
• pp.459-468
• /
• 2014

Groyne to control the direction and velocity of flow in rivers is generally installed for the purpose of protecting riverbanks or embankments from erosion caused by running water. In particular, as interest in river restoration and natural river improvement increases, groynes are proposed as a key hydraulic structure for local flow control and riparian habitat establishment. Groynes are installed mainly in groups rather than as individual structures. In case of groynes installed as a group, flow around the groynes change according to spacing in between the groynes. Therefore, groyne spacing is regarded as the most important factor in groyne design. This study aimed at examining changes of flows around and within the area of groynes that take place according to the spacing of groynes installed in order to propose the optimal spacing for upward groynes. To examine flow characteristics around groynes, this study looked at flows in main flow area and recirculation flow area separately. In main flow area, it examined the impact of flow velocity increasing as a result of conveyance reduction that is exerted on river bed stability in relation to changes in the maximum flow velocity according to installation spacing. As a factor causing impacts on scouring and sedimentation within the area of groynes, recirculation flow in the groyne area can lead problems concerning flow within the area and stability of embankment. As for recirculation area, an analysis was conducted on the scale of rotational flow and the flow around embankment that exerts impacts on stability of the embankment. In addition, a comparative analysis was carried with reference to changes of the central point of rotational flow that occur within the area of groynes. As a result of compositely examining the results, the appropriate installation spacing is proposed as min. four times-max. six times considering a decrease in flow velocity according to the installation of upward groynes, river bed stability and stability of embankments against counterflow within the area of groynes.

• Journal of Radiation Protection and Research
• /
• v.39 no.1
• /
• pp.21-29
• /
• 2014

A new cold neutron triple-axis spectrometer (Cold-TAS) was recently constructed at the 30 MWth research reactor, HANARO. The spectrometer, which is composed of neutron optical components and radiation shield, required a redesign of the segmented monochromator shield due to the lack of adequate support of its weight. To shed some weight, lowering the height of the segmented shield was suggested while adding more radiation shield to the top cover of the monochromator chamber. To investigate the radiological effect of such change, we performed MCNPX simulations of a few different configurations of the Cold-TAS monochromator shield and obtained neutron and photon intensities at 5 reference points just outside the shield. Reducing the 35% of the height of the segmented shield and locating lead 10 cm from the bottom of the top cover made of polyethylene was shown to perform just as well as the original configuration as radiation shield excepting gamma flux at two points. Using gamma map by MCNPX, it was checked that is distribution of gamma. Increased flux had direction to the top and it had longer distance from top of segmented shield. However, because of reducing the 35% of the height, height of dissipated gamma was lower than original geometry. Reducing the 35% of the height of the segmented shield and locating lead 10cm from the bottom of the top cover was selected. After changing geometry, radiation dose was measured by TLD for confirming tester's safety at any condition. Neutron(0.21 ${\mu}Svhr^{-1}$) and gamma(3.69 ${\mu}Svhr^{-1}$) radiation dose were satisfied standard(6.25 ${\mu}Svhr^{-1}$).

• Journal of Bio-Environment Control
• /
• v.29 no.1
• /
• pp.52-61
• /
• 2020

The natural change of winter night temperature from 00:00 to 04:30 O'clock with the different height of thermal screen in a venlo type glasshouse (W59×L68×H5.9 m) was studied using computational fluid dynamics (CFD). At the early stage of CFD analysis, the room temperature decrease of glasshouse with the 5.9 m height of thermal screen were faster than it with the 4.1m height of thermal screen, but at 2 hr after analysis it was slower than in it with the 4,1m, the temperature difference was 0.6℃ after 4 hr. If we consider that turn on the heater when the temperature were decrease below 13℃ at 1hr after CFD analysis, it is good for energy saving in the glasshouse with the 4.1 m height of thermal screen rather than in it with the 5.9 m height, because of the temperature decrease were slow during 2 hrs after analysis. The airflow at the height of 2 m which were grown tomato were fast and wide in the glasshouse with the 5.9 m height thermal screen rather than in it with the 4.1 m, the speed difference was 0.034m·s^-1 at 1hr after CFD analysis. The effect of temperature decrease in summer season were compared with the different height of shading screen from 12:00 to 14:30 O'clock. The height of shading screen were 5.7, 3.9 m, the gap of it were 30%. The air-inflow quantity by the fan with duct at lower part of venlo glasshouse was 0.67 ㎥·s^-1 until 1hr and to increase 3 times of it from 1hr after analysis. The roof window were open 100%. Until 1hr of CFD analysis, the temperature in the 30% open of shading screen was 0.9℃ higher than in the none shading screen. From 13:00 O'clock when the air-inlet quantity to increase 3 times, the temperature in case 30% gap of shading screen were decreased compare with the none shading screen, the temperature difference was 0.5℃ at 14:30 O'clock. The temperature on the floor surface in case 30% gap of shading screen were lower with it's height increase, the temperature difference was 8℃ compare with none shading screen. The relative humidity difference were insignificant by the height and gap of shading screen.

• Radiation Oncology Journal
• /
• v.28 no.3
• /
• pp.177-183
• /
• 2010

Purpose: Simulation using computed tomography (CT) is now widely available for radiation treatment planning for breast cancer. It is an important tool to help define the tumor target and normal tissue based on anatomical features of an individual patient. In Korea, most patients have small sized breasts and the purpose of this study was to review the margin of treatment field between conventional two-dimensional (2D) planning and CT based three-dimensional (3D) planning in patients with small breasts. Materials and Methods: Twenty-five consecutive patients with early breast cancer undergoing breast conservation therapy were selected. All patients underwent 3D CT based planning with a conventional breast tangential field design. In 2D planning, the treatment field margins were determined by palpation of the breast parenchyma (In general, the superior: base of the clavicle, medial: midline, lateral: mid - axillary line, and inferior margin: 2 m below the inframammary fold). In 3D planning, the clinical target volume (CTV) ought to comprise all glandular breast tissue, and the PTV was obtained by adding a 3D margin of 1 cm around the CTV except in the skin direction. The difference in the treatment field margin and equivalent field size between 2D and 3D planning were evaluated. The association between radiation field margins and factors such as body mass index, menopause status, and bra size was determined. Lung volume and heart volume were examined on the basis of the prescribed breast radiation dose and 3D dose distribution. Results: The margins of the treatment field were smaller in the 3D planning except for two patients. The superior margin was especially variable (average, 2.5 cm; range, -2.5 to 4.5 cm; SD, 1.85). The margin of these targets did not vary equally across BMI class, menopause status, or bra size. The average irradiated lung volume was significantly lower for 3D planning. The average irradiated heart volume did not decrease significantly. Conclusion: The use of 3D CT based planning reduced the radiation field in early breast cancer patients with small breasts in relation to conventional planning. Though a coherent definition of the breast is needed, CT-based planning generated the better plan in terms of reducing the irradiation volume of normal tissue. Moreover it was possible that 3D CT based planning showed better CTV coverage including postoperative change.

• The Korean Society of Law and Medicine
• /
• v.20 no.2
• /
• pp.173-206
• /
• 2019

This research examines the characteristic of regulation on Japanese clinical research in recent years. First, Japan has had a severe punishment policy on research misconduct like Korea, but, in recent days, Japan has changed the direction of research ethics policy from restriction to research publicness securement by educational training, in addition, Act of Clinical Research, effected April 2018, has recruited excellent researchers, and then integrated clinical research and medicine clinical trial through raising transparency of funding and integrating ethics screening by mandating announcement on funding information of clinical research. Second, Japan has integrated and organized ethics guideline from dual system that consists of ethics guideline on dynamic research(here after, referred to as 「dynamic guideline」) and ethics guideline on clinical research(here after, referred to as 「clinical guideline」) to ethics guideline on medical research aimed at human(here after, referred to as 「integrated guideline」), thus, it complements repetition and deficit of ethics guideline needed in clinical research and dynamic research, and it has risk evaluation system for protecting human subjects, and also it clarifies the concept of 「invasiveness」, a preliminary consideration of evaluation. 「Evaluation issue of risk and profit」, common contents of international regulation related clinical research, is the method to check whether the research is designed appropriately or not, this is the method for Institutional Review Board to decide whether the risk on human subjects could be justified, and also this is the important standard for future human subjects to participate in clinical trial. Therefore, it is meaningful to define 「invasiveness」 concept, a preliminary consideration of risk evaluation for human subjects. This research examines Japanese clinical trial focusing on change of awareness on prevention of research misconduct, efficiency improvement of research through research screening and integration of human subjects, and clarification and extension of range of 「invasiveness」 concept, a preliminary of risk evaluation to protect human subjects.

• Cartoon and Animation Studies
• /
• s.39
• /
• pp.413-450
• /
• 2015

Although cartoons have been recognized for their great potential and value, they have failed to bloom in Korea. This is because wrong perception and irregular distribution of cartoons have been repeated for the last several years. Presently, however, cartoons are escaping from chronic problems they have had for long and welcoming splendid chances now. From the mid- and late-1990's, there have been large-scale events having cartoons as their theme, and social recognition on cartoons is becoming more and more positive. Their contents are diversified, readers are increased, and they are escaping from stereotypes through harmony with other media. Lately, either large or small exhibitions for cartoons are being planned, and Korean cartoons are going overseas and producing exhibitions there. Particularly, visitors' appreciative eye is getting keener, and they begin to see them not as a genre underestimated as low culture like in the past but as a kind of art on which independent research is being actively conducted. One of the biggest factors that have allowed cartoons to be positioned as visual art is the form of exhibitions that combine them with other genres artistically. Especially the cartoon exhibitions being held these days are aggressively introducing various elements of the cartoon genre through the medium of exhibitions not just as a mere tool of seeing to help understand cartoon writers or works. The genre of cartoons is now regarded as an active subject that can reflect its own unique essence in this rapidly changing cultural environment and extend the range of it itself. The latest cartoon exhibitions are characterized by trans-genre and complex aspects in terms of their direction or organization according to the contents, space, or theme. This trend of cartoon exhibitions implies that they are subdividing, analyzing, and planning various factors not in a horizontal way that was centered around image as in the past. It means that cartoon exhibitions are evolving as a form of mobilizing, combining, and reproducing various methods. Although a number of cartoon exhibitions are being held with a variety of themes, there is still lack of research on cartoon exhibitions concerning their forms and contents. Therefore, this researcher sees cartoon exhibitions as a factor that allows cartoons to escape from negative recognition and examines various cartoon exhibitions, from Seoul International Cartoon Animation Festival to the ones that are recently held, to figure out the meaning of Korean cartoon exhibitions. Furthermore, this researcher will find out the factors of planning and popularity in international exhibitions or personal cartoon exhibitions being presently held and figure out new directions and potentials for Korean cartoon exhibitions based on that. To meet the needs of visitors whose expectations have become even higher, it is needed to try not just previous methods but experimental and original planning as well constantly. To realize that, it is necessary to keep providing a field of opportunity where cartoon works, cartoon writers, and visitors can communicate as in an exhibition. It is expected that this study will trigger research on cartoon exhibitions to be performed multilaterally and produce new discourse on cartoon exhibitions afterwards.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.5
• /
• pp.78-90
• /
• 2019

The purpose of this study is to explore the direction of developing policies for parks and green spaces for inclusive urban planning and regeneration. By reviewing the status, budget, and laws pertaining to urban parks in Korea, as well as assessing the inclusivity of urban parks, this study revealed the problems and limitations in Korea as follows. First, the urban park system, which takes into account indicators such as park area per capita and green space ratio, is focused only on quantitative expansion. Second, the distribution of urban parks is unequal; hence, the higher the number of vulnerable residents, the lower the quality of urban parks and green spaces. Moreover, this study focused on the UK central government, along with the five local governments, including London, Edinburgh, Cardiff, Belfast, and Liverpool. Through an analysis of the contexts and contents establishing UK park and green space policies that can reduce socioeconomic inequalities while at the same time increase inclusiveness. This study discovered the following. The government's awareness of the necessity of tackling socioeconomic inequalities to make an inclusive society, the change in the urban regeneration policies from physical redevelopment to neighborhood renewal, and the survey and research on the correlation of parks and green spaces, inequality, health, and well-being provided the background for policy establishment. As a result, the creation of an inclusive society has been reflected in the stated goals of the UK's national plan and the strategies for park and green space supply and qualitative improvement. Deprived areas and vulnerable groups have been included in many local governments' park and green space policies. Also, tools for analyzing deficiencies in parks and methods for examining the qualitative evaluation of parks were developed. Besides, for the sustainability of each project, various funding programs have been set up, such as raising funds and fund-matching schemes. Different ways of supporting partnerships have been arranged, such as the establishment of collaborative bodies for government organizations, allowing for the participation of private organizations. The study results suggested five policy schemes, including conducting research on inequality and inclusiveness for parks and green spaces, developing strategies for improving the quality of park services, identifying tools for analyzing policy areas, developing park project models for urban regeneration, and building partnerships and establishing support systems.