• 한국자동차공학회논문집
• /
• 제7권7호
• /
• pp.54-65
• /
• 1999

In this study, the flow field, spray structure, and combustion process were investigated in a direct injection diesel engine having an offset bowl in a combustion chamber. The KIVA-3V code was used in this study. In order to obtain accurate results, a droplet atomization model, wall impingement model, and ignition delay concept were added to KIVA-3V code. The results showed that the offset bowl engine had a large vortex flow. The direction of this flow counteracted to the direction of fuel injection in one side of combustion chamber. It decreased local turbulent kinetic energy and eventually nonuniform combustion was resulted in an offset bowl engine. In comparison with a center bowl engine case, the peak cylinder pressure was decreased about 6%. Finally , the effect of swirl on combustion was investigated in an offset bowl engine . As the became stronger, the nouniform characteristics in combustion were increased.

• 한국전산유체공학회지
• /
• 제18권2호
• /
• pp.99-108
• /
• 2013

The standard drag force and virtual mass force, which exert to the primary flow direction, are generally considered in two-phase analysis computational codes. In this paper, the lift force, wall lubrication force, and turbulent dispersion force including turbulence models, which are essential for a computational multi-fluid dynamics model and play an important role in motion perpendicular to the primary flow direction, were introduced and verified with conceptual problems.

• 대한안전경영과학회지
• /
• 제13권2호
• /
• pp.67-75
• /
• 2011

Contrast a general building high rise buildings itself has a kind of risk. In this study, the risk of a number of high rise buildings have fire fighting safety management of the particular risks associated with looking for ways to minimize focused. Issues include self fire protection. disaster management, building code and fire code of the mismatch, such as fire protection facilities aspects are explained in terms of three kinds, and for it to take steps in the direction suggested an alternative for high rise buildings. Although differences of opinion between departments will not be easy to fire fighting and building codes regarding conflicts of codes above all require immediate resolution, and high rise buildings to create a standard for effective risk management manual countermeasures will also be ensured.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.553-556
• /
• 2008

A Magneto Plasma Sail(MPS) produces propulsive force by the interaction between the solar wind and an artificial magnetic field inflated by injecting plasma. Using a 2D hybrid PIC code, we evaluate the inflation of magnetic field when Argon(Ar) plasma with different ${\beta}_{in}$ including the value less than one is injected into the dipolar magnetic field generated by a superconducting coil. It is found that the magnetic field can be inflated by injecting plasma within an angle of $30^{\circ}$ in the polar direction and the magnetic field decays in the polar direction according to $B{\propto}r^{-2.4}$ after the plasma(${\beta}_{in}$=0.1) is injected.

• 한국소프트웨어감정평가학회 논문지
• /
• 제17권1호
• /
• pp.25-30
• /
• 2021

임베디드 시스템 소스코드 감정목적물의 유사성을 판단하는 경우, 제공된 소스코드가 컴파일이 가능한 상태인지, 실행이 정상적으로 되는 것인지, 하드웨어와의 인터페이스가 일치하는지 등의 확인이 되지 않은 상태로 제공되는 경우가 지속적으로 발생하고 있다. 분쟁을 제기하는 측에서는 동작의 특성이 유사하고, 나타나는 기능의 효과가 유사한 이유로 소스코드의 많은 부분이 유사할 것으로 판단하고, 감정을 요청하게 되지만, 위의 여러 가지 상황으로 유사성 분석 결과가 기대와 다르게 나타나는 가능성이 우려된다. 본 연구에서는 감정사례를 통해 소스코드의 분석 과정과 검증되지 않은 소스코드의 유사성 도출의 개선방향을 제시한다.

• 한국진공학회지
• /
• 제12권3호
• /
• pp.162-167
• /
• 2003

시료에 주입된 이온의 깊이방향에 따른 농도분포를 알아보기 위하여 시료표면을 sputtering 하면서 튀어나온 주입된 이온을 depth profiling한다. Depth profiling 측정 시에 깊이방향에 영향을 주는 sputtering rate가 변화하는 효과를 SRIM simulation을 이용하여 계산하였다. 시료에 이온이 주입하게 되면 시료의 원자밀도는 약간 증가하게 되는데, 그 결과로 sputtering yield가 변화하게 된다. 이러한 변화가 결과적으로 depth profile 측정시에 깊이방향에 영향을 줄 수 있는 sputtering rate를 변화시키는 원인이 된다. SRIM(Stopping and Range of Ions in Matter) Monte Carlo simulation code를 사용하여 이온주입에 의한 시료의 원자밀도의 변화에 따른 sputtering yield를 구하여 sputtering rate를 계산하고, 그 차이가 depth profiling 측정에서 깊이방향 분포에 영향을 줄 수 있다는 것을 확인하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권12호
• /
• pp.6000-6017
• /
• 2018

This paper presents a new descriptor, named Histograms of Prominent Edge Directions (HPED), for the recognition of facial expressions in a person-independent environment. In this paper, we raise the issue of sampling error in generating the code-histogram from spatial regions of the face image, as observed in the existing descriptors. HPED describes facial appearance changes based on the statistical distribution of the top two prominent edge directions (i.e., primary and secondary direction) captured over small spatial regions of the face. Compared to existing descriptors, HPED uses a smaller number of code-bins to describe the spatial regions, which helps avoid sampling error despite having fewer samples while preserving the valuable spatial information. In contrast to the existing Histogram of Oriented Gradients (HOG) that uses the histogram of the primary edge direction (i.e., gradient orientation) only, we additionally consider the histogram of the secondary edge direction, which provides more meaningful shape information related to the local texture. Experiments on popular facial expression datasets demonstrate the superior performance of the proposed HPED against existing descriptors in a person-independent environment.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2019년도 춘계학술논문요약집
• /
• pp.78-79
• /
• 2019

• 한국군사과학기술학회지
• /
• 제10권1호
• /
• pp.101-106
• /
• 2007

In this paper, we propose chain code based decision technique of edge orientation. Edge Information is one of the most important information for handling image signals, and is applied to various civilian and military area, such as image surveillance for military reconnaissance, restoration of noised image signal, fingerprint recognition, and so on. The conventional methods to find edge orientations exploit a certain size of mask which weights for a certain direction, so they showed limitations in the case of diagonal edges except 45 degrees. We find edge orientations using chain code. According to the experiments, the proposed method shows better performance than the conventional approaches. The exact edge orientations including diagonal directions are well found.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.22-25
• /
• 1999

A dynamic explicit finite element code for simulating sheet forming processes has been developed The code utilises the discrete Kirchhoff shell element and contact force is treated by a conventional penalty method. In order to reduce the computational cost a new and robust contact searching algorithm has been developed and implemented into the code. in the method a hierarchical structure of tool segments called a tree structure is built for each tool at the initial stage of the analysis Tree is built in a way to divide a trunk to 8 sub-trunk 2 in each direction until the lowest level of the tree(leaf) contains exactly one segment of the tool. In order to have a well-balanced tree each box on each sub level contains one eighth of the segments. Then at each time step contact line from a node comes out of the surface of the tool. Simulation of various sheet forming processes were performed to verify the validity of the developed code with main focus on he usefulness of the developed contact searching algorithm.