• 한국실내디자인학회논문집
• /
• 제17권6호
• /
• pp.120-127
• /
• 2008

Korean space design image is a kind of writing as well as one of the sign that dissembles itself as a direct transcript of what it represents. Moreover it is pictorial representation and notions such as mental and perceptual imaginary. Significance of Iconology lies in how we transform image and the imagination that produces it into power of trust and respect. From this point of view, the process of this study is illustrated as follows: At first, this study search out concept of archetype, collective unconsciousness and collective representation that found principles on basic theory for interpretation of korean space icon. Secondly, it mentions theoretical background of iconological contents and structure. And it clarifies Iconology as a method that is applicable logic for Korean space design. Finally, as an analysis of korean space design, this study analyse in three steps that are pre-iconological description, iconological analysis, iconological interpretation each in terms of modernization at regional korean space design. In the step of the pre-iconological description, it describe visual representative style based on era and place. In the step of the iconological analysis, the typical structure is classified in status, vernacular, ethnic, traditional. In the step of the iconological interpretation, connotation is categorized into allegory, multivalence, potential. Through this process, this study suggest that iconology is an appropriate analysis system of Korean space design images that represent symbols combined with our collective emotion.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.1080-1083
• /
• 2002

In this paper, we have studied with regard to the use of lasers for modifying the surface properties of silicon in order to improve it's wettability and adhesion characteristics. Using an Nd:YAG pulse laser, the wettability and adhesion characteristics of silicon surface have been developed by an Nd:YAG pulse laser. It was found that the laser treatment of silicon surfaces modified the surface energy. In the result of wetting experiments, by the sessile drop technique using the distilled water, wetting characteristic of silicon after the laser irradiation shows a decreased value of the contact angle. In case of the laser treated silicon surface, laser direct writing of copper lines has been achieved by pyrolytic decomposition of copper formate films$(Cu(HCOO)_2{\cdot}4H_2Q)$, using a focused $Ar^+$ laser beam$(\lambda=514.5nm)$ on the silicon substrates. The deposited patterns were measured by energy dispersive X-ray(EDX), Scanning Electron Microscopy(SEM) and surface profiler($\alpha$-step) to examine the cross section of deposited copper lines and linewidth.

• 영어어문교육
• /
• 제15권3호
• /
• pp.33-57
• /
• 2009

Taking the issues of inequity and power between NES and NNES teachers as a starting point, this qualitative study explores the way the widespread belief of the native speaker fallacy manifests itself in one NNES teacher's teaching life and is linked to the teacher's understanding of herself as an English teacher. Guided by critical applied linguistics (Pennycook, 2001) and using Bourdieu's (1991) theorization of symbolic violence, I conducted an instrumental case study (Stake, 1995) in an ESL writing class at a US university. I collected data through classroom observations and interviews over a nine-month period and analyzed the data using the constant comparison method (Glaser and Strauss, 1967). The findings illustrate the ways the dominant ideology of the native speaker fallacy works to maintain and reproduce the status quo unequal relation between NES and NNES teachers by making all parties involved believe in the artificial sociocultural arrangements that favor NES teachers as legitimate. The findings direct our attention to the importance of critical teacher education that will enable future TESOL professionals to engage in critical reflection on diverse issues and envision transformative change. The findings, in particular, point to the need for language support for NNES teachers in TESOL teacher education.

• ETRI Journal
• /
• 제14권1호
• /
• pp.52-65
• /
• 1992

전자선 직접묘사 (E-beam direct writing lithography) 방법을 이용하여 $0.2\mum$ 과 $0.3\mum$ 의 게이트길이를 가지는 NMOS 트랜지스터를 제작하였다. 게이트만 전자선 직접묘사 방법으로 정의하고 나머지는 optical stepper를 이용하는 Mix & Match 방식을 사용하였다. 게이트산화막의 두께는 최소 6nm까지 성장시켰으며, 트랜지스터구조로서는 lightly-doped drain(LDD) 구조를 채택하였다. 짧은 채널효과 및 punch through를 줄이기 위한 방안으로 채널에 깊이 붕소이온을 주입하는 방법과 well을 고농도로 도핑하는 방법 및 소스와 드레인에 $p^-$halo를 이온주입하는 enhanced lightly-doped drain(ELDD) 방법을 적용하였으며, 제작후 성능을 각각 비교하였다. 제작된 $0.2\mum$의 게이트길이를 가지는 소자에서는 문턱전압과 subthreshold기울기는 각각 0.69V 및 88mV/dec. 이었으며, Vds=3.3V에서 측정한 포화 transconductance와 포화 드레인전류는 각각 200mS/mm, 0.6mA/$\mum$이었다. $0.3\mum$소자에서는 문턱전압과 subthreshold 기울기는 각각 0.72V 및 82mV/dec. 이었으며, Vds=3.3V에서 측정한 포화 transconductance는 184mS/mm이었다. 이러한 결과는 전원전압이 3.3V일 때 실제 ULSI에 적용가능함을 알 수 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.45-48
• /
• 2002

This paper discusses the surface roughness of negative chemically amplified resists, SAL601 exposed by I-beam direct writing. system. Surface roughness, as measured by atomic force microscopy, have been simulated and compared to experimental results. Molecular-scale simulator predicts the roughness dependence on material properties and process conditions. A chemical amplification is made to occur in the resists during PEB process. Monte-Carlo and exposure simulations are used as the same program as before. However, molecular-scale PEB simulation has been remodeled using a two-dimensional molecular lattice representation of the polymer matrix. Changes in surface roughness are shown to correlate with the dose of exposure and tile baking time of PEB process. The result of simulation has a similar tendency with that of experiment.

• 한국정밀공학회지
• /
• 제31권2호
• /
• pp.149-156
• /
• 2014

Flexible tactile sensors can provide valuable feedback to intelligent robots about the environment. This is especially important when the robots, e.g., service robots, are sharing the workspace with human. This paper presents a flexible tactile sensor that was manufactured by direct writing technique, which is one of 3D printing method with multi-walled carbon nano-tubes. The signal processing system consists of two parts: analog circuits to amplify and filter the sensor output and digital signal processing algorithms to reduce undesired noise. Finally, experimental setup is implemented and evaluated to identify the characteristics of the flexible tactile sensor system. This paper showed that this type of sensors can detect the initiation and termination of contacts with appropriate signal processing.

• 한국정밀공학회지
• /
• 제23권9호
• /
• pp.164-173
• /
• 2006

The cooling capacity of a micro-heat pipe is mainly governed by the magnitude of capillary pressure induced in the wick structure. For microchannel wicks, a higher capillary pressure is achievable for narrower and deeper channels. In this study, a metallic micro-heat pipe adopting high-aspect-ratio microchannel wicks is fabricated. Micromachining of high-aspect-ratio microchannels is done using the laser-induced wet etching technique in which a focused laser beam irradiates the workpiece placed in a liquid etchant along a desired channel pattern. Because of the direct writing characteristic of the laser-induced wet etching method, no mask is necessary and the fabrication procedure is relatively simple. Deep microchannels of an aspect ratio close to 10 can be readily fabricated with little heat damage of the workpiece. The laser-induced wet etching process for the fabrication of high-aspect-ratio microchannels in 0.5mm thick stainless steel foil is presented in detail. The shape and size variations of microchannels with respect to the process variables, such as laser power, scanning speed, number of scans, and etchant concentration are closely examined. Also, the fabrication of a flat micro-heat pipe based on the high-aspect-ratio microchannels is demonstrated.

• 한국정밀공학회지
• /
• 제22권7호
• /
• pp.27-37
• /
• 2005

Direct writing technology on the silicon wafer surface is used to reduce the size of the chip as the miniature trend in electronic circuit. In order to improve the productivity and efficiency, the real time quality estimation is very important in each semiconductor process. In laser marking, marking quality is determined by readability which is dependant on the contrast of surface, the line width, and the melting depth. Many researchers have tried to find theoretical and numerical estimation models fur groove geometry. However, these models are limited to be applied to the real system. In this study, the estimation system for the line width during the laser marking was proposed by process monitoring method. The light intensity emitted by plasma which is produced when irradiating the laser to the silicon wafer was measured using the optical sensor. Because the laser marking is too fast to measure with external sensor, we build up the coaxial monitoring system. Analysis for the correlation between the acquired signals and the line width according to the change of laser power was carried out. Also, we developed the models enabling the estimation of line width of the laser marking through the statistical regression models and may see that their estimating performances were excellent.

• Macromolecular Research
• /
• 제13권5호
• /
• pp.435-440
• /
• 2005

This study describes a method where the match of two different length scales, i.e., the patterns from self-assembled block copolymer (<50 nm) and electron beam writing (>50 nm), allow the nanometer scale pattern mask. The method is based on using block copolymers containing a poly(methyl methacrylate) (PMMA) block, which is subject to be decomposed under an electron beam, as a pattern resist for electron beam lithography. Electron beam on self assembled block copolymer thin film selectively etches PMMA microdomains, giving rise to a polymeric nano-pattern mask on which subsequent evaporation of chromium produces the arrays of Cr nanoparticles followed by lifting off the mask. Furthermore, electron beam lithography was performed on the micropatterned block copolymer film fabricated by micro-imprinting, leading to a hierarchical self assembled pattern where a broad range of length scales was effectively assembled, ranging from several tens of nanometers, through submicrons, to a few microns.

• 융복합기술연구소 논문집
• /
• 제1권1호
• /
• pp.34-40
• /
• 2011

In this paper, a hybrid design tool combining one-dimensional(1D) lumped model and three-dimensional computational fluid dynamics(CFD) approach has been developed in order to evaluate the performance of inkjet print head and droplet control process are studied to reduce the deviations between nozzles which affect the size of the printed line for the industrial application of direct writing on printed circuit boards(PCB). 1D lumped model analysis shows that it is useful tool for evaluating performance of an inkjet head by varying the design parameters. The differences in ejected volume and droplet velocity between analytical and experimental result are within 12%. Time sequence of droplet generation is verified by the comparison between 3D analysis result and photographic images acquired by stroboscopic technique. In addition, by applying DPN process, velocity and volume uniformity between nozzles is dramatically improved that the tolerance achieved by the piezoelectric inkjet printhead across the 64 nozzles is 5 to 8%. A printed line pattern is successfully obtained using the fabricated inkjet print head and droplet calibration system.