• 제목/요약/키워드: direct tunnel

검색결과 199건 처리시간 0.025초

Experimental and numerical investigation of the energy harvesting flexible flag in the wake of a bluff body

  • Latif, Usman;Abdullah, Chaudary;Uddin, Emad;Younis, M. Yamin;Sajid, Muhamad;Shah, Samiur Rehman;Mubasha, Aamir
    • Wind and Structures
    • /
    • 제26권5호
    • /
    • pp.279-292
    • /
    • 2018
  • Inspired by the energy harvesting eel, a flexible flag behind a D-shape cylinder in a uniform viscous flow was simulated by using the immersed boundary method (IBM) along with low-speed wind tunnel experimentation. The flag in the wake of the cylinder was strongly influenced by the vortices shed from the upstream cylinder under the vortex-vortex and vortex-body interactions. Geometric and flow parameters were optimized for the flexible flag subjected to passive flapping. The influence of length and bending coefficient of the flexible flag, the diameters (D) of the cylinder and the streamwise spacing between the cylinder and the flag, on the energy generation was examined. Constructive and destructive vortex interaction modes, unidirectional and bidirectional bending and the different flapping frequency were found which explained the variations in the energy of the downstream flag. Voltage output and flapping behavior of the flag were also observed experimentally to find a more direct relationship between the bending of the flag and its power generation.

충전된 절리면의 전단특성에 관한 기초연구 (Basic Study on Shear Characteristics of Filled Rock Joint)

  • 김용준;이영휘;도성규
    • 터널과지하공간
    • /
    • 제14권5호
    • /
    • pp.318-326
    • /
    • 2004
  • 본 연구에서는 다양한 경계조건에서 충전물을 포함한 절리면의 역학적 특성을 규명할 수 있는 절리면 전단시험 장비를 개발하였다. 그리고 개발된 시험장비를 이용하여 돌출부 경사, 수직응력, 충전물 종류 및 두께변화에 따른 전단시험을 수행하고 충전된 절리면의 전단특성을 고찰하였다. 일정수직응력 조건에서 충전물 종류 및 두께, 돌출부 경사, 수직응력 등을 변화하여 실험을 수행한 바에 의하면 충전된 절리면의 거동과 강도특성은 절리면의 거칠기, 충전물 두께와 종류에 따라 영향을 받는 것으로 나타났으며, 충전물이 없는 절리면과 비교할 때 팽창각이 감소하여 거칠기 영향이 충전물에 의해 감소되는 것으로 나타났다. 그리고 한계두께비는 충전물 종류뿐만 아니라 응력수준, 거칠기에 따라서도 다른 것으로 나타났다.

방오 도료가 도장된 평판에 대한 항력 성능 연구 (Study on the Drag Performance of the Flat Plates Treated by Antifouling Paints)

  • 백부근;김경열;조성락;안종우;조상래;김경래;정용욱
    • 대한조선학회논문집
    • /
    • 제50권6호
    • /
    • pp.399-406
    • /
    • 2013
  • In the present study, the flat plate model test method is developed to evaluate the skin friction of the marine coating in the cavitation tunnel. Six-component force balance is used to measure the profile drag of the flat plate and strut. LDV(laser Doppler velocimetry) technique is also employed to evaluate the drag and to figure out the reason of the drag reduction. The flow velocities above the surface can be used to assess the skin friction, combined with direct force measurement. Since the vortical structure in the coherent turbulence structure influences on the skin friction in the high Reynolds number regime, the interaction between the turbulence structure and the surface wall is paying more attention. This sort of thing is important in the passive control of the turbulent boundary layer because the skin friction can't be determined only by wall condition. As complicated flow phenomena exist around a paint film, systematic measurement and analysis are necessary to evaluate the skin friction appropriately.

수중 매장물 조사에 응용되는 전기 및 자기 탐사사례 (Some case histories to detect underwater buried objects by electrical and magnetic methods)

  • 정현기;박영수;임무택;임형래
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2004년도 정기총회 및 제6최 특별 심포지움
    • /
    • pp.118-137
    • /
    • 2004
  • 근래에 금속성 혹은 비금속성 매장 유물이나 포탄 등의 수중 탐색 문제가 강바닥, 호수바닥, 해저 또는 갯벌 등의 얕은 수심 현장에서 자주 발생하고 있다. 본 발표에서는 이러한 목적에 사용되는 최근의 세계적 수중 탐지장비들의 적용성 및 한계를 살펴보고, 수중매장물 조사에 응용될 수 있는 전기 및 자기탐사 사례를 소개한다. 그러나 현재까지 직접적인 수중 매장물 탐사사례는 거의 없으므로 체계적인 보고보다는 앞으로의 다양한 현장 응용에 도움이 될 수중 전기 및 자기 탐사 방법에 대해 강바닥/호수바닥/해저시추공탐사/갯벌등의 관련 국내 현장사례에 대해 정리하여 현장문제 발생시 일조하고자 한다. 대부분의 지하 물리탐사 문제가 그렇듯이 대상체를 효율적으로 찾기 위해서는 직접적인 탐지뿐만이 아니라 조사구역내의 간접적인 지질정보를 최대한 탐사 활용하여야 적중률을 높일 수 있다. 그리고 여기서 소개되는 각종 수중 탐사사례들은 그 자체가 현장 수용에 부응하는 새로운 탐사시스템의 개발에 중요한 설계 지침이 될 수 있다. 한편 다양한 현장 수요에 맞추어 신속 정밀 다채널 배열 센서들에 의한 전자기 방식 실시간 물 바닥 스캐닝 탐지시스템의 설계제안도 제시해 본다.

  • PDF

변형 Martius 구해면체 지방피판술을 이용한 신생방광-질루의 치험례 (Neobladder-vaginal Fistula Repair with Modified Martius Bulbocavernosus Fat Pad Flap)

  • 명유진;박지웅;정의철;김석화
    • Archives of Plastic Surgery
    • /
    • 제38권3호
    • /
    • pp.329-332
    • /
    • 2011
  • Purpose: In developed countries, vesicovaginal fistula occur from various pelvic operations including total hysterectomy, leading to urinary leakage and incontinence. Although various methods have been proposed for adequate tissue coverage in fistula repair, the surgical treatment of is not simple and still controversial. We report a case of neobladder-vaginal fistula repair using modified Martius fat pad flap. Methods: A 62-year-old female patient underwent radical cystectomy with total abdominal hysterectomy and neobladder formation due to invasive bladder tumor 5 years ago. For 3 years following the operation, urine leakage was observed. Exploration demonstrated neobladder-vaginal fistula and primary repair including fistulectomy and direct closure was performed. Urinary incontinence relapsed 2 years after primary repair, and after demonstrating the recurrence of fistula on urography, repair of recurrent fistula was performed. After dissection of vagina and neobladder and closure of fistula by urologic surgeon, fibroadipose flap was elevated, rotated and advanced through the tunnel at vaginal sidewall, and interpositioned to the fistula site between neobladder and vagina. Results: There was no acute complication after the surgery and urethral catheter was extracted on the 8th day after the operation. During six month follow-up period after the operation, there is no clinical evidence of fistula recurrence. Conclusion: From our clinical experience and literature review, we think Martius fat pad flap is a useful technique in management of neobladder-vaginal fistula, for it provides enough vascularity, major epithelization surface and better lymphatic drainage, and also prevents overlapping of vesical, vaginal suture lines at the same time.

핵변환 잔류 고준위 방사성 폐기물 처분 성능 평가 (Safety Assessment on Disposal of HLW from P&T Cycle)

  • 이연명;황용수;강철형
    • 터널과지하공간
    • /
    • 제11권2호
    • /
    • pp.132-145
    • /
    • 2001
  • 핵변환 후 영구 처분될 가압경수로 및 중수로용 사용후 핵연료에 대한 인간 생태계에 대한 영향을, 직접 처분하는 경우와 비교해 보았다. 심지층 처분된 용기에 저장된 사용후 핵연료로부터 유출된 방사성 핵종들이 공학적 방벽을거쳐 결정질 기반암 내 균열대를 통해 지하수의 흐름을 따라 이동하면서, 다양한 지질 및 암종을 거쳐 생태 환경으로 도달한다는 핵종 유출 시나리오 중 가장 보수적인 시나리오인 우물 시나리오에 대한 위해도를 평가하여 상대인 환경친화성을 정량적으로 제시하였다. 현재 국내에 가속기와 미임계형 원자로를 함께 사용하는 핵변환 시스템과 임계형 원자로와 같은 핵변환시스템이 개념적인 수준에서 개발되고 있어, 이 연구를 통해 향후 핵변환시스템 연구에서 요구되는 항목들도 기술적 개선, 경제성 제고, 환경 친화성, 그리고 수용성 측면에서 제시해 보았다.

  • PDF

거친 절리면의 전단거동 해석을 위한 탄소성 구성법칙 (An Elasto-Plastic Constitutive Law for Modeling the Shear Behavior of Rough Rock Joints)

  • 이연규;이정인
    • 터널과지하공간
    • /
    • 제8권3호
    • /
    • pp.234-248
    • /
    • 1998
  • 거친 절리면의 수직팽창 특성이 전단거동에 미치는 영향을 고려할 수 있는 새로운 전단거동 구성법책을 탄소성이론에 근거하여 제시하였다. 공식화 과정에서는 항복함수 및 소성포텐셜 함수로 Barton의 경험적 강도식들이 이용되었다. 전단강도의 경화 및 연화현상을 반영시키기 이해 mobilized JRC 개념이 적용되었다. 최대전단강도 이전과 이후의 JRC 변화는 절리면 전단방향 소성일의 함수로 표현할 수 있다고 가정하였다. 제안된 구성모델을 개별체 절리 유한요소에 적용하여 실행시켰다. 경계조건을 달리한 수치 직접전단시험을 통하여 제안된 모델을 검증하였다. 해석결과는 여러 문헌에 보고된 실험결과들과 잘 일치하였다. 또한 제안된 모델은 거친 절리면의 전단시험에서 특징적으로 나타나는 현상들을 잘 모사할 수 있음을 보였다.

  • PDF

고밀도 나노선을 이용한 태양전지 구현 및 특성 분석

  • 김명상;황정우;지택수;신재철
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
    • /
    • pp.323-323
    • /
    • 2014
  • 기존의 태양전지 기술은 기술 장벽이 매우 낮고 대량 생산을 통한 단가 절감하는 구조를 가지고 있어 대규모 자본을 가진 후발 기업에게 잠식되기 쉽다. 그러나, III-V족 화합물 반도체를 이용한 집광형 고효율 태양전지는 기술 장벽이 매우 높은 기술 집약 산업이므로 독자적인 기술을 확보하게 되면 독점적인 시장을 확보 할 수 있어 미래 고부가 가치 산업으로 적합하다. 특히 III-V족 화합물 반도체 태양전지는 III족 원소(In, Ga, Al)와 V족 원소(As, P)의 조합으로 0.3 eV~2.5 eV까지 밴드갭을 가지는 다양한 박막 제조가 가능하여 다양한 흡수 대역을 가지는 태양전지 제조가 가능하기 때문에 다중 접합 태양전지 제작이 가능하다. 또한 III-V 화합물 반도체는 고온 특성이 우수하여 온도 안정성 및 신뢰성이 우수하고, 또한 집광 시 효율이 상승하는 특성이 있어 고배율 집광형 태양광 발전 시스템에 가장 적합하다. Si 태양전지의 경우 100배 이하의 집광에서 사용하나, III-V 화합물 반도체 태양전지의 경우 500~1000배 정도의 고집광이 가능하다. 이러한 특성으로 III-V 화합물 반도체 태양전지 모듈 가격을 낮출 수 있고, 따라서 Si 태양전지 시스템과 비교하여 발전 단가 면에서 경쟁력을 확보할 수 있다. III-V 화합물 반도체는 다양한 밴드갭 에너지를 가지는 박막 제조가 용이하고, 직접천이(direct bandgap) 구조를 가지고 있어 실리콘에 비해 광 흡수율이 높다. 또한 터널정션(tunnel junction)을 이용하면 광학적 손실과 전기적 소실을 최소화 하면서 다양한 밴드갭을 가지는 태양전지를 직렬 연결이 가능하여 한 번의 박막 증착 공정으로 넓은 흡수대역을 가지며 효율이 높은 다중접합 태양전지 제작이 가능하다. 이에 걸맞게 본연구에서는 화학기상증착장치(MOCVD)를 이용하여 InAsP 나노선을 코어 쉘 구조로 성장하여 태양전지를 제작하였다. P-type Dopant로는 Disilane (Si2H6)을 전구체로 사용하였다. 또한 Benzocyclobutene (BCB) 폴리머를 이용하여 Dielectric을 형성하였고 Sputtering 방법으로 증착한 ZnO을 투명 전극으로 사용하여 나노선 끝부분과 실리콘 기판에 메탈 전극을 형성하였다. 이를 통해 제작한 태양전지는 솔라시뮬레이터로 측정했을때 최고 7%에 달하는 변환효율을 나타내었다.

  • PDF

능선부 개착에 의해 형성된 암반사면 거동해석 (Analysis for the Behavior of Ridge-Cut Rock Slope)

  • 조태진;황택진;신선미;이근호
    • 터널과지하공간
    • /
    • 제22권6호
    • /
    • pp.393-402
    • /
    • 2012
  • 정상부가 개착된 암반사면에 지중경사계를 설치하여 개착사면의 내부 거동을 계측하였으며, 국지적으로 배후면 방향으로의 거동이 관찰되었다. 사면 거동, 특히 배후면 방향으로의 거동을 유발시키는 원인을 분석하기 위하여 시추작업을 수행하였다. 추출된 시추코어를 관찰하여 사면 암반의 암석학적 취약성을 조사하였으며, 공내 BIPS 영상을 취득하여 암반의 구조적 특성을 분석하였다. 코어 절리 시료를 이용하여 불연속면의 역학적 특성을 측정하였으며, 탄질물이 협재된 절리 시료에 대한 직접전단시험을 수행하여 전단강도를 측정하였다. 사면 거동에 대한 계측결과를 사면 암반과 탄질물이 협재된 절리들의 구조적 및 역학적 특성을 종합적으로 고려하여 해석하였으며, 절리에 협재된 탄질물 및 팽윤성 점토광물의 존재에 의해 국지적인 사면거동이 지배될 수 있는 잠재성을 확인하였다.

"C"자형 만곡비변형의 교정: 건측 비골판줄질(Rasping of Nasal Bone Flap)과 건측 비배측 비중격절제술(Trimming of Dorsal Septum)의 중요성 (Correction of Deviated Nose: Importance of Rasping of Non-affected Side Nasal Bone Flap and Trimming of Non-affected Side Dorsal Septum)

  • 한기환;이민재;김준형;김현지;손대구
    • Archives of Plastic Surgery
    • /
    • 제32권6호
    • /
    • pp.710-716
    • /
    • 2005
  • A total of 21 patients were operated. Via a columellar labial incision, the upper lateral cartilages were separated from the septum. A submucous resection of the septal cartilage was carried out. After rasping the convex lateral nasal wall of the unaffected side, a low-to-low lateral nasal osteotomy was conducted. Along the deviated dorsal line at the bony vault passing the submucous tunnel, a paramedian nasal osteotomy was performed. The convex side of the nasal bone flap was contoured by rasping. The convex side of the "T"-shaped dorsal septum was trimmed. A total direct septal extension graft of the septal cartilage was done and the alar cartilages were suspended to it. The postoperative results were evaluated by photogrammetric analysis processed by a "neon glow" filter in Adobe Photoshop. The distance from the nasal midline to the most deflective point at 5 levels was measured, and the proportion indices were obtained in regard to intercanthal distance. The results revealed improvement in all levels (p < 0.05), although not perfect. In summary, this technique can result in a clinically good-looking in spite of a slight deflection that still exists