Russia's push in the Asia-Pacific region stems from its interests that have the national, regional and global dimensions. In their turn, the aims of this policy are civilizational, geopolitical, economic and prospective, with a long-term outlook. In the course of their achievement, cooperation with Northeast Asia's countries will play one of the key roles owing to the factors of geographic proximity, Northeast Asia's economic potential, risk hedging and a growing influence Northeast Asia exerts upon the global development. A new cooperation paradigm between Russia and the states of Northeast Asia should be based upon establishing and cementing self-reproducing ties. This is the central aim of Russian initiatives in relations, with Japan, the Republic of Korea, Democratic People's Republic of Korea, Mongolia and China. However, numerous obstacles ranging from Russia's absence in the regional free trade agreements and supply-production chains of value-added production to the permanent international instability generated by Pyongyang's missile-nuclear developments hamper the practical implementation of this task. Realizing the necessity to give an additional impetus to this new cooperative paradigm, Russia has to develop directions with an apparent consolidating effect. The most promising may be the establishment of a permanent security forum based upon Northeast Asia Peace and Security Mechanism chaired by the Russian Federation. The urgency of this measure and its expected support stem from the necessity to strengthen security in Northeast Asia, a task neither the US-led hub-and-spoke system nor ASE-AN-led multilateral dialogue venues have been able to resolve. The issues addressed at the security forum must include the unification of approaches to North Korean nuclear issue and producing a document specifying actions of the claimants on the disputed maritime territories in the "direct contact" situations. At the expert level, Russia has elaborated on the idea to establish such a forum outlining the spectrum of the key directions of cooperation. With the urgency in the establishment of this dialogue venue, its agenda has to be coordinated with the agendas of the existing security systems presented by the US alliances and the ASE-AN-led multilateral negotiations. The practical implementation of this initiative will strengthen security in Northeast Asia as its challenges will be resolved in the pre-emptive way based on coordinated approaches. Therefore, Russia as the Eurasian state will be one of the role players in the advent of the Asian century.
Lim, Hyun Taek;Lee, So Hee;Lee, Jung Hwa;Kim, Jeong Eun;Kim, Kyo Sun;Jeong, Eun Ju;Lee, Seung Hyun;Kang, Chang Gyu;Hong, Seong Jin
Clinical and Experimental Pediatrics
/
v.48
no.10
/
pp.1107-1115
/
2005
Purpose : An outbreak of ESBL-producing Shigella sonnei enteritis was unprecedented not only in Korea but throughout the world in the past. We intended to devise a management guideline for ESBL-producing shigellosis based on analysis of clinical manifestations and response to therapy. Methods : We analyzed 103 patients who were admitted to the hospital with acute GI symptoms and were shown positive result for S. sonnei on stool culture. We performed sensitivity test to the antibiotics and DNA sequencing of ESBL gene in the isolated S. sonnei colonies. In addition, we retrospectively analyzed their clinical characteristics, laboratory results, and clinical and microbiological responses to the antibiotics. Results : Among the clinical manifestations, fever was the most frequent(96.1%), followed by diarrhea(93.2%), abdominal pain(76.7%), headache(71.8%), vomiting(65.0%), and nausea(41.7%). The fever was sustained for average of 2.0 days and diarrhea for 3.9 days. Watery diarrhea was the most common(69%) followed by mucoid(26%), and bloody stool(5%). On peripheral blood smear, leukocytosis was noted in 53.4% of patients, and 78.6% of patients tested positive for serum CRP response. On stool direct smear, 11.7% of patients showed more than 50 WBCs/HPF, and 9.7% of patients between 5 to 20 WBCs/HPF. Stool occult blood was positive in 71% of patients. Production of CTX-M-14 type ESBL was reported for all S. sonnei strains isolated from this outbreak. Microbiological eradication rates to various antibiotics were as follows : 100%(9/9) to ciprofloxacin, 100% 5/5) to azithromycin, 6.9%(5/72) to cefdinir, 0%(0/8) to ceftriaxone, 12.5%(1/8) to ceftizoxime, 0%(0/ 8) to TMP/SMX, 42.9%(3/7) to ampicillin/sulbactam, 20%(1/5) to amoxicillin/clavulanic acid, and 68.8 %(11/16) to imipenem/cilastatin. Conclusion : It is presumed that azithromycin can be an attractive option for the treatment of ESBL-producing S. sonnei enteritis in pediatric population, given its cost-effectiveness and safety. Although ciprofloxacin is another cost-effective agent, its use in pediatric population may be a bit too premature.
The composite resin, due to its esthetic qualities, is considered the material of choice for restoration of anterior teeth. With respect to shade control, the direct-placement resin composites offer some distinct advantages over indirect restorative procedures. Visible-light-cured (VLC) composites allow dentists to match existing tooth shades or to create new shades and to evaluate them immediately at the time of restoration placement. Optimal intraoral color control can be achieved if optical changes occurring during application are minimized. An ideal VLC composite, then, would be one which is optically stable throughout the polymerization process. The shade guides of the resin composites are generally made of plastic, rather than the actual composite material, and do not accurately depict the true shade, translucency, or opacity of the resin composite after polymerization. So the numerous problems associated with these shade guides lead to varied and sometimes unpredictable results. The aim of this study was to assess the color changes of current resin composite restorative materials which occur as a result of the polymerization process and to compare the color differences between the shade guides provided with the products and the actual resin composites before- and after-polymerization. The results obtained from this investigation should provide the clinician with information which may aid in improved color match of esthetic restoration. Five light activated, resin-based materials (${\AE}$litefil, Amelogen Universal, Spectrum TPH VeridonFil-Photo, and Z100) and shade guides were used in this study. Three specimens of each material and shade combination were made. Each material was condensed inside a 1.5mm thick metal mold with 10mm diameter and pressed between glass plates. Each material was measured immediately before polymerization, and polymerized with Curing Light XL 3000 (3M Dental products, USA) visible light-activation unit for 60 seconds at each side. The specimens were then polished sequentially on wet sandpaper. Shade guides were ground with polishing stones and rubber points (Shofu) to a thickness of approximately 1.5mm. Color characteristics were performed with a spectrophotometer (CM-3500d, Minolta Co., LTD). A computer-controlled spectrophotometer was used to determine CIELAB coordinates ($L^*$, $a^*$ and $b^*$) of each specimen and shade guide. The CIELAB measurements made it possible to evaluate the amount of the color difference values (${\Delta}E{^*}ab$) of resin composites before the polymerization process and shade guides using the post-polishing color of the composite as a control, CIE standard D65 was used as the light source. The results were as follows. 1. Each of the resin composites evaluated showed significant color changes during light-curing process. All the resin composites evaluated except all the tested shades of 2100 showed unacceptable level of color changes (${\Delta}E{^*}ab$ greater than 3.3) between pre-polymerization and post-polishing state. 2. Color differences between most of the resin composites tested and their corresponding shade guides were acceptable but those between C2 shade of ${\AE}$litefil and IE shade of Amelogen Universal and their respective shade guides exceeded what is acceptable. 3. Comparison of the mean ${\Delta}E{^*}ab$ values of materials revealed that Z100 showed the least overall color change between pre-polymerization and post-polishing state followed by ${\AE}$litefil, VeridonFil-Photo, Spectrum TPH, and Amelogen Universal in the order of increasing change and Amelogen Universal. Spectrum TPH, 2100, VeridonFil-Photo and ${\AE}$litefil for the color differences between actual resin and shade guide. 4. In the clinical environment, the shade guide is the better choice than the shade of the actual resin before polymerization when matching colors. But, it is recommended that custom shade guides be made from resin material itself for better color matching.
Between 1997 and 1998 in Korea, 56 isolates of Escherichia coli were obtained from pig suffering diarrhea. Among those, 38 isolates that showed the hemolytic activity, antimicrobial resistance, and toxin production were studied. Among 38 isolates, thirty-six isolates $(94.7\%)$ were resistant to tetracycline, 27 isolates $(71.0\%)$ were resistant to ampicillin, 26 isolates $(68.4\%)$ were resistant to chloramphenicol, and 21 isolates $(55.2\%)$ were resistant to trimethoprim, while none was resistant to aztreonam, amikacin, and norfloxacin. Among these isolates, 21 isolates $(55.3\%)$ were multiple drug resistant to at least four different class antimicrobial agents. Extended spectrum $\beta-lactamase$ producing isolates were not detected in the double disk synergy test. In these hemolytic Escherichia coli, heat-stable enterotoxin $(89.5\%)$ was the most prevalent toxin, followed by verotoxins $(47.4\%),$ and then heat-labile enterotoxin $(31.6\%).$ Except 8 isolates $(21.0\%)$ which produced ST only, 12 isolates $(31.6\%)$ produced ST and LT, 13 isolates $(34.2\%)$ produced ST, VT, and VTe, and 5 isolates $(13.2\%)$ produced VT and VTe. However, none produced all 4 types of toxin, simultaneously. The predominant serotype could not be determined by the agglutination method. Sixteen isolates $(42.1\%)$ were strongly adhered to T-24 bladder cell and 17 isolates $(44.7\%)$ were to Caco-2 intestinal cell. Especially, 11 strains $(28.9\%)$ were evaluated as strongly adhesive to both T-24 cells and Caco-2 cells. Genes for toxin and the antimicrobial resistance were transferred to clinical isolates of Escherichia coli from human urine by the filter mating method. Results suggest the possibility that antimicrobial resistance and toxin can be transferred from animals to humans by direct contact of resistant bacteria as well as gene transfer, although there was no correlation between toxin production, adherent activity, and antimicrobial resistance among hemolytic E. coli isolated from pig suffering diarrhea.
Processing is generally employed to alter the physical and chemical properties of feeds used in pig diets, using hammer/roller mills, pellet mills and extruders/expanders. The reported optimum particle sizes of corn are approximately $500{\mu}m$, $500-700{\mu}m$, $400-600{\mu}m$, for nursery, growing-finishing, and breeder pigs respectively. Optimum particle size of grains are affected by diet complexity. There was a trend towards reducing particle size in order to increase ADG in pigs fed a simple diet, though such was not the case for pigs fed a complex diet. Uniformity of particle size also affects the nutritional values of swine feeds. Uniform particle sizes would consistently give greater nutrient digestibilities. In terms of pellet quality, it is reported that a higher incidence of fmes in pelleted feeds has a direct correlation with poorer feed conversion ratio in pigs. Particle and pellet sizes are also very important for pelleting in terms of grinding, digestibility, stomach ulceration and pellet durability. A particle size of $600{\mu}m$, or slightly less, seemed optimal for com in fmishing pigs, and the 5/32 in. diameter pellets supported the best efficiencies of gain during nursery and finishing phases. Extruder and/or expander processes would allow the feed industry an increased flexibility to utilize a wider spectrum of feed ingredients, and improve pellet quality of finished feeds. It would appear that extruded or expanded diets containing highly digestible ingredients have little effect on the growth performance of pigs, and the feeding values of the feeds over pelleted diets were not improved as pigs grew. The extruder or expander is much more effective than a pelletizer in salmonella control. Gastric ulcerations and/or keratinizations were consistently reported in pigs fed mash and processed diets containing finely ground grains, whereas carcass quality was not affected by diet processing methods such as pelleting, extruding or expanding. In corn- or sorghum-based diets, the electrical energy consumption is 4-5 times higher in the expanding than in the pelleting process. But the expander's processing cost was half of that shown by an extruder. Finally, the decision of which feed processing technology to adopt would depend on the processing cost, and any potential improvement in growth performance and digestibilities of nutrients should offset the increased operating and capital costs related to the extruder/expander technology over mash or pelleting processes in pigs.
Kim, Jae-Hwa;Cho, Duck-Yun;Yoon, Hyung-Ku;Kim, Jung-Ryul
Journal of the Korean Arthroscopy Society
/
v.10
no.1
/
pp.118-122
/
2006
Purpose: We introduce a technique of all inside arthroscopic capsular imbrication and lateral release used to treat patellofemoral instability. Methods: With the arthroscope in the anteromedial portal for best viewing, the arthroscopic scissor is placed through superolateral portal for proximal to distal release. The release performed 5mm to 1cm from the edge of the patella. After completion of the procedure, with the arthroscope in anterolateral portal, we inserted 5mm cannula in superolateral portal and made working portal from superomedial portal. Medial reefing was performed with all inside technique by using curved needle of the spectrum suturing system and No. 1 monofilament PDS suture is passed through the superomedial portal percutaneously and retrieved through a superolateral portal. Conclusion: Several methods for arthroscopic patella realignment have been proposed, but they have consisted primarily of arthroscopically assisted techniques using a medial incision. We believe that our procedure is preferable to arthroscopically assisted methods commonly used, in that an incision is avoided and the vastus medialis obliqqus is not violated. Our technique is minimally invasive and is easy to control the tightness of the medial patellofemoral ligament (MPFL) under direct vision.
The Journal of Korean Institute of Electromagnetic Engineering and Science
/
v.16
no.5
s.96
/
pp.541-548
/
2005
The research deals with the prediction and the measurement of electromagnetic wave propagation in rectangular shaped tunnels at f=2.65 GHz. The received power level was measured in the straight and the curved tunnel by using a spectrum analyzer and Satellite DMB mobile phone. Thus we have gotten the data for two cases, the straight and the curved tunnel whose radius is 300m. In addition, the prediction of wave propagation was conducted based on the ray-launching method, in same tunnel where measurement was performed. A good agreement of the measured and the predicted path loss could be confirmed. The measured path loss shows a marked difference in propagation loss: the path-loss exponent, 3.21, and 3.98, for a straight and a curved tunnel, respectively. The reason that path-loss exponent is high in a curved tunnel is that there is no direct wave but only the reflected waves, which attenuates rapidly with distance due to multiple reflections. Also the predicted path loss shows path loss exeponent, 3.2 and 3.95, for a straight and a curved tunnel which are similar to the simulation results.
Botanical antimicrobial agent-grapefruit seed extract mixture(BAAG), which could be applied to the preparation of antimicrobial packaging paper, was investigated in order to prove the preservative function of fruits and vegetables. HAAG showed remarkable antimicrobial effects against Fusarium solani Botrytis cinerea, Pencillium crustosum, Erwinia carotovora, Phoma destructiva and Alternaria radicina causing the postharvest decay of fruits and vegetables. We have examined that HAAG could inhibit the growth of microorganims when treated with more than 500 $\mu$g/mL concentration. The activities of HAAG were stable in the wide spectrum of pH and temperature. Direct visualization of microbial cells by using scanning electron microscope showed the loss of microbial cell membrane function, which was destroyed by treating with the dilute solutions of HAAG. We could confirm that HAAG be an antimicrobial agent for the preparation of antimicrobial packaging paper.
The accurate radiative transfer model simulation is essential for an accurate ozone profile retrieval using optimal estimation from backscattered ultraviolet (BUV) measurement. The input parameters of the radiative transfer model are the main factors that determine the model accuracy. In particular, meteorological parameters such as temperature and surface pressure have a direct effect on simulating radiation spectrum as a component for calculating ozone absorption cross section and Rayleigh scattering. Hence, a sensitivity of UV ozone profile retrievals to these parameters has been investigated using radiative transfer model. The surface pressure shows an average error within 100 hPa in the daily / monthly climatological data based on the numerical weather prediction model, and the calculated ozone retrieval error is less than 0.2 DU for each layer. On the other hand, the temperature shows an error of 1-7K depending on the observation station and altitude for the same daily / monthly climatological data, and the calculated ozone retrieval error is about 4 DU for each layer. These results can help to understand the obtained vertical ozone information from satellite. In addition, they are expected to be used effectively in selecting the meteorological input data and establishing the system design direction in the process of applying the algorithm to satellite operation.
Seo, Dong-Ju;Choi, Sang-Bae;Kang, Chang-Mo;Seo, Tae Hoon;Suh, Eun-Kyung;Lee, Dong-Seon
Proceedings of the Korean Vacuum Society Conference
/
2013.02a
/
pp.345-346
/
2013
InGaN material is being studied increasingly as a prospective material for solar cells. One of the merits for solar cell applications is that the band gap energy can be engineered from 0.7 eV for InN to 3.4 eV for GaN by varying of indium composition, which covers almost of solar spectrum from UV to IR. It is essential for better cell efficiency to improve not only the crystalline quality of the epitaxial layers but also fabrication of the solar cells. Fabrication includes transparent top electrodes and surface texturing which will improve the carrier extraction. Surface texturing is one of the most employed methods to enhance the extraction efficiency in LED fabrication and can be formed on a p-GaN surface, on an N-face of GaN, and even on an indium tin oxide (ITO) layer. Surface texturing method has also been adopted in InGaN-based solar cells and proved to enhance the efficiency. Since the texturing by direct etching of p-GaN, however, was known to induce the damage and result in degraded electrical properties, texturing has been studied widely on ITO layers. However, it is important to optimize the ITO thickness in Solar Cells applications since the reflectance is fluctuated by ITO thickness variation resulting in reduced light extraction at target wavelength. ITO texturing made by wet etching or dry etching was also revealed to increased series resistance in ITO film. In this work, we report a new way of texturing by deposition of thickness-optimized ITO films on ITO nano dots, which can further reduce the reflectance as well as electrical degradation originated from the ITO etching process.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.