• Steel and Composite Structures
• /
• 제42권1호
• /
• pp.75-90
• /
• 2022

The pointwise equilibrium polynomial (PEP) element considering local second-order effect has been widely used in direct analysis of many practical engineering structures. However, it was derived according to Euler-Bernoulli beam theory and therefore it cannot consider shear deformation, which may lead to inaccurate prediction for deep beams. In this paper, a novel beam-column element based on Timoshenko beam theory is proposed to overcome the drawback of PEP element. A fifth-order polynomial is adopted for the lateral deflection of the proposed element, while a quadric shear strain field based on equilibrium equation is assumed for transverse shear deformation. Further, an additional quadric function is adopted in this new element to account for member initial geometrical imperfection. In conjunction with a reliable and effective three-dimensional (3D) co-rotational technique, the proposed element can consider both member initial imperfection and transverse shear deformation for second-order direct analysis of frame structures. Some benchmark problems are provided to demonstrate the accuracy and high performance of the proposed element. The significant adverse influence on structural behaviors due to shear deformation and initial imperfection is also discussed.

• 한국지반공학회지:지반
• /
• 제10권4호
• /
• pp.67-82
• /
• 1994

본 연구에서는 강 함유재에 의한 점토에서의 전단강도 증가를 예측하기 위하여 직접전단하에서 힘의 한계평형에 근거한 보강점토 모델이 제안되었다. 본 모델은 함유재의 방향과 길이, 함유재와 점토사이 부착응력 및 함유재의 이동에 따른 흙의 수동저항력이 보강점토의 거동에 미치는 영향을 고려하였다. 이론적인 예측과 비교검토하기 위하여 개폐된 전단박스로 구성된 직접전단 장치를 이용하여 직접전단시험을 실시하였다. 또한 함유재와 점토사이의 부착응력을 산정하기 위하여 인발실험을 실시하였다. 시험결과 보강점토의 전단응력의 증가 또는 감소는 함유재의 방향과 점토의 함수비와 관련되어 있음을 알았다. 이론적인 예측과 시험결과를 비교한 결과 본 이론적인 모델은 함유재의 방향과 함유재의 이동에 따른 흙의 수동 저항력이 보강점토의 역학적인 거동에 미치는 영향을 비교적 잘 예측 해주고 있음을 알 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.82-89
• /
• 2004

To secure stability and availability of Rammed Aggregate Pier method as the foundation of a structure, the shear strength characteristics according to the area replacement ratio of RAP and the relative density of in-situ ground was studied through soil laboratory tests and large direct shear tests in a model ground. As a result, the internal friction angle tends to increase in proportion to in-situ relative density(Very Loose, Loose, Medium) in composite ground formed by the same area replacement ratio of RAP and also increase in proportion to increasing the area replacement ratio(30, 40, 50%) of RAP in the same ground condition. Furthermore, the comparative analysis between the experimental value and theoretical value of the shear strength is carried out.

• Journal of Mechanical Science and Technology
• /
• 제19권8호
• /
• pp.1682-1691
• /
• 2005

Direct numerical simulation database of an axial turbulent boundary layer is used to compute frequency and wave number spectra of the wall shear-stress fluctuations in a low-Reynolds number axial turbulent boundary layer. One-dimensional and two-dimensional power spectra of flow variables are calculated and compared. At low wave numbers and frequencies, the power of streamwise shear stress is larger than that of spanwise shear stress, while the powers of both stresses are almost the same at high wave numbers and frequencies. The frequency/streamwise wave number spectra of the wall flow variables show that large-scale fluctuations to the rms value is largest for the stream wise shear stress, while that of small-scale fluctuations to the rms value is largest for pressure. In the two-point auto-correlations, negative correlation occurs in streamwise separations for pressure, and in span wise correlation for both shear stresses.

• 지질공학
• /
• 제31권4호
• /
• pp.561-577
• /
• 2021

Barton and Choubey(1977)가 제안한 10개의 표준 거칠기 단면을 3차원으로 확장하여 모든 단면의 거칠기가 일정한 3차원 표준 거칠기 절리 모형을 제작하였다. 석고를 사용하여 이 절리 모형을 복제하여 절리시료를 제작하였고, 복제된 절리시료에 직접전단시험을 실시하여 표준거칠기 단면에 부여된 절리 거칠기계수(JRC)를 검증하였다. 먼저 절리 시료의 JRC, 절리면압축강도(JCS)와 기본마찰각(𝜙_b)을 이용하여 Barton (1973)의 전단강도 기준식에서 절리의 전단강도를 추정하고, 직접전단시험에서 측정된 전단강도와 비교하였다. 직접전단시험에서 측정된 전단강도는 1번과 4번 표준 거칠기를 제외한 8개 시료에서 Barton의 기준식에서 추정된 전단강도보다 낮았고, JRC가 큰 시료에서 차이가 더욱 크게 나타났다. 직접전단시험 결과를 역해석하여 JRC, JCS 그리고 𝜙_b의 적절성을 검토하였고, JRC의 문제점으로 인하여 측정된 전단강도가 추정된 전단강도보다 낮은 것으로 판명되었다. 역해석으로 구한 표준 거칠기 단면의 JRC 값인 JRC_m은 JRC보다 전반적으로 낮은 값을 보이지만 JRC와 상관성이 매우 높은 직선의 관계를 나타내었다. 위의 결과를 종합하여 표준 거칠기 단면의 정확한 JRC_m을 제시하였고, JRC_m과 JRC의 상관관계를 제시하였으며, Barton의 전단강도 기준식을 수정하여 제안하였다.

• 대한조선학회논문집
• /
• 제53권3호
• /
• pp.188-194
• /
• 2016

Accurate estimation of shear flows in thin-walled beam section is the key issue to evaluate shear stress distribution of ship hull transverse section under the shear forces acting on hull girder. It is regarded that the method using the warping functions obtained by finite element formulation is the state of the art of this field. Recently, however, IACS took effect the new version of CSR in which direct calculation process of shear flow was suggested. In the direct calculation process, shear flow of ship hull section can be obtained by the addition of determinate and indeterminate shear flows calculated respectively. So, in this paper, the shear flow evaluation codes based on the process proposed by IACS CSR and warping function based method were developed respectively. The calculated results of shear flows for the several examples of ship sections were compared with each other and considered in detail.

• Journal of Welding and Joining
• /
• 제29권4호
• /
• pp.93-99
• /
• 2011

This study was performed to compare the shear strength of the bondings between stainless steel crown/direct type composite resin and stainless steel crown/indirect type composite resin. Four groups of bonding conditions were prepared. Two groups of bonding conditions were made by the indirect type composite resin system and the other two groups were made by the direct type composite resin system. The shear strength tests were carried out using universal testing machine, Model 4465 of Instron Co.. It was indicated that the bond strength values of the indirect type composite resins were higher than those of the direct type composite resins. TE-SE group was superior to the TE-ONE in indirect type resin system. These results were thought to be the high degree of the polymerization accompanied with temperature and pressure of the resin of indirect type resin. It was also found that indirect composite resin contains less amount of porosity in resin.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 학술대회
• /
• pp.347-354
• /
• 2008

We introduce a series of studies on turbulent skin friction drag reduction in wall-turbulence. First, an identity equation relating the skin friction drag and the Reynolds shear stress (the FIK identity) is introduced. Based on the implication of the FIK identity, a new analytical suboptimal feedback control law requiring the streamwise wall-shear stress only is introduced and direct numerical simulation (DNS) results of turbulent pipe flow with that control is reported. We also introduce DNS of an anisotropic compliant surface and parameter optimization using an evolutionary optimization technique.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년 추계학술대회논문집
• /
• pp.347-354
• /
• 2008

We introduce a series of studies on turbulent skin friction drag reduction in wall-turbulence. First, an identity equation relating the skin friction drag and the Reynolds shear stress (the FIK identity) is introduced. Based on the implication of the FIK identity, a new analytical suboptimal feedback control law requiring the streamwise wall-shear stress only is introduced and direct numerical simulation (DNS) results of turbulent pipe flow with that control is reported. We also introduce DNS of an anisotropic compliant surface and parameter optimization using an evolutionary optimization technique.

• 한국방재학회 논문집
• /
• 제9권1호
• /
• pp.27-32
• /
• 2009

본 연구의 주목적은 아스팔트 포장층간의 접착전단강도를 측정하는 실험법과 평가 방법을 개발하고 배수성 포장에 사용되는 택코트 재료의 특성과 적정 살포량을 평가하고자 하였다. 실험에는 두 종류(RSC-4, 개질유화)의 유화아스팔트와 가열 아스팔트바인더 타입(HM-1) 한 종류로 실시하였으며, HM-1은 배수성 포장에 사용하기 위해 새로 개발된 제품이다. 접착전단강도를 측정하기 위해 직접전단실험을 다양한 실험 조건에서 수행하였다. 실험을 통해 얻은 접착전단강도 값은 결과의 변별력이 떨어 졌으며 하중-변위 곡선의 면적인 터프니스가 접착전단강도를 평가하는데 보다 유용한 것을 확인 할 수 있었다. 배수성 포장의 경우 RSC-4의 경우는 $0.8l/m^2$ 이상, 개질유화아스팔트의 경우는 $0.5{\sim}0.6l/m^2$의 살포량이 적당한 것으로 나타났다. Trackless 성능이 우수한 HM-1은 유화 아스팔트 택코트에 비해 월등히 좋은 접착전단성능을 발휘하는 것으로 나타났다.