• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 2011년도 추계 총회 및 창립 30주년 기념 심포지엄
• /
• pp.3-21
• /
• 2011

Laboratory experiments and numerical simulations using Particle Flow Code (PFC2D) were performed to study the effects of joint separation and joint overlapping on the full failure behavior of rock bridges under direct shear loading. Through numerical direct shear tests, the failure process is visually observed and the failure patterns are achieved with reasonable conformity with the experimental results. The simulation results clearly showed that cracks developed during the test were predominantly tension cracks. It was deduced that the failure pattern was mostly influenced by both of the joint separation and joint overlapping while the shear strength is closely related to the failure pattern and its failure mechanism. The studies revealed that shear strength of rock bridges are increased with increasing in the joint separation. Also, it was observed that for a fixed cross sectional area of rock bridges, shear strength of overlapped joints are less than the shear strength of non-overlapped joints.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.86-87
• /
• 2015

An active study on UHPC, which has been recently used in high-rise building and bridges, is in progress. However, research on bonding shear strength of UHPC is required to be studied due to the lack of information. In this study, experimental research progress for bonding shear strength (shear strength of adhesive surface) evaluation of UHPC (Ultra High Performance Concrete) is proceeded. First, specimens that surface treatment methods of concrete bonded section and retardation time of placement are considered are produced. Second, Direct Shear test is applied on concrete bonded section of UHPC. As a result of this study, the highest bonding shear strength specimen in which compared to the non-retardation time specimen is compaction turbulence treatment. From later study, it is judged that strength of UHPC in accordance with direction of steel fiber when steel fiber of UHPC is mixed.

• 터널과지하공간
• /
• 제30권6호
• /
• pp.551-558
• /
• 2020

기존 시험법은 암석시편의 절리면 직접전단시험시 겉보기 면적의 변화를 고려해야 한다고 명시하고 있다. 본 기술보고는 암석코어 시편의 절리면 직접전단시험시 겉보기 면적 계산방법을 제시하였다. 암석코어 시편의 초기 절리면을 타원으로 가정하고, 타원의 중첩면적 감소를 계산하는 수식을 정리하였다. 전단변위와 겉보기 면적을 정규화하면 타원형상에 관계없이 일정한 변화 비율을 가지는 것을 확인하였다. 암석코어 시편 전단시험을 위한 정규화 실험상수를 제안하여 일반화된 계산방법을 제안하였다. 그 방법을 실제 전단시험의 데이터에 적용하여 결과 변화값을 확인하고, 정확도에 대해 간략히 토의하였다.

• 한국해양공학회지
• /
• 제23권3호
• /
• pp.20-29
• /
• 2009

This study investigated the shear strength characteristics of waste tire powder-added lightweight soil (WTLS), which were developed to recycle dredged soil, bottom ash, and waste tires. The WTLS used in this experiment consisted of dredged soil, bottom ash, waste tire powder, and cement. Test specimens were prepared with various contents of waste tire powder ranging from 0% to 100% at 25% intervals and bottom ash contents of 0% or 100% by the weight of the dry dredged soil. In this study several series of direct shear tests were carried out, which indicated that the shear properties of WTLS were strongly influenced by the mixing conditions, such as the waste tire powder content and bottom ash content. The unit weight, as well as the shear strength of the WTLS, decreased with an increase in waste tire powder content. The shear strength of WTLS with bottom ash was 1.34 times greater than that of WTLS without bottom ash. An average increase in cohesion of 30 kPa was obtained in WTLS with the inclusion of bottom ash due to the bond strength induced from the pozzolanic reaction of the bottom ash. In this test, the maximum value of the internal friction angle was obtained with a 25% content of waste tire powder.

• Geomechanics and Engineering
• /
• 제30권1호
• /
• pp.27-44
• /
• 2022

Gravelly soil is a kind of special geotechnical material, which is widely used in the subgrade engineering of railway, highway and airport. Its mechanical properties are very complex, and will greatly influence the stability of subgrade engineering. To investigate the mechanical properties and failure mechanism of gravelly soils, this paper introduced and verified a new discrete element method (DEM) of gravelly soils in large scale direct shear test, which considers the actual shape and broken characteristics of gravels. Then, the stress and strain characteristics, particle interaction, particle contact force, crack development and energy conversion in gravelly soils during the shear process were analyzed using this method. Moreover, the effects of gravel content (GC) on the mechanical properties and failure characteristics were discussed. The results reveal that as GC increases, the shear stress becomes more fluctuating, the peak shear stress increases, the volumetric strain tends to dilate, the average particle contact force increases, the cumulative number of cracks increases, and the shear failure plane becomes coarser. Higher GC will change the friction angle with a trend of "stability", "increase", and "stability". Differently, it affects the cohesion with a law of "increase", "stability" and "increase".

• Geomechanics and Engineering
• /
• 제34권2호
• /
• pp.173-186
• /
• 2023

In order to prevent environmental pollution, initiatives to increase the sustainability of resources are supported by society. However, the performance of recycled materials does not generally match that of natural materials. This study looks into the use of geogrid to improve various types of recycled aggregates. For this purpose, five different recycled aggregates were created by recycling wastes from the construction industry. Besides, direct shear tests (DS tests) were carried out on these recycled aggregates to determine their shear strengths. Following that, a triaxial geogrid was placed in the recycled aggregates to provide reinforcement, and the DS tests were conducted on the reinforced recycled aggregates. The results of the tests were also compared to those of tests performed on natural aggregates (NA). In conclusion, it was found that the recycled aggregates have lower shear strengths than the NA. Nonetheless, when reinforced with geogrid, the shear strength of the recycled concrete aggregates (RCA) and construction and demolition wastes (CDW) exceeded that of the NA. Furthermore, the geogrid reinforcement increased the shear strength of the recycled crushed bricks (CB), though not to the level of the NA.

• 지질공학
• /
• 제3권1호
• /
• pp.1-20
• /
• 1993

본 연구에서는 절리면에서의 전단거동 특성을 규명하기 위해 총 37개의 편마암종 코아 시편들을 대상으로 Portable Direct Shear Box를 이용하여 실내 직접전단시험을 수행하였다. 시편들에 가해진 최대 수직응력의 범위는 $5.60~25.67kg/\textrm{cm}^2$이었으며, 전단하중을 점진적으로 가중시키는 다단계 전단시험법에 준하여 실험하였다. 이러한 방법에 의한 실험결과들을 분석하여 절리면의 전단강도에 관한 경험식들을 제시하였으며, 전단거동에 영향을 미치는 역학적 파라미터들을 도출하여 상호 비교 분석하였다. 절리조도계수에 따른 전단강성의 변화는 수직응력이 증가함에 따라 시편의 절리조도계수가 클수록 전단강성의 값도 급증하는 경향을 보이며, 본 실험에 적용한 최대 수직응력 하에서 구한 평균 할선 전단강성은 약 $110.68kg/\textrm{cm}^3$였다. 또한 수직응력이 증가함에 따라 시편의 깅이와 전단강성 사이에는 크기효과(size effect)에 의한 반비례 관계를 나타내어, 동일한 절리조도계수를 지닌 시편일지라도 길이가 긴 시편의 경우에 전단강성이 감소함을 알 수 있었다.

• 한국지반공학회논문집
• /
• 제24권6호
• /
• pp.69-75
• /
• 2008

분리형부재 보강토 옹벽(SRW)을 구성하는 생태축조블록 접촉면에 대한 전단시험을 수행하였다. 전단이 발생하는 두 개의 블록 사이의 접촉면조건은 두 블록을 직접 접촉시키는 경우와 블록 사이에 고무패드를 설치한 경우 그리고 블록 사이에 고무패드와 전단키를 설치한 각각 3가지 접촉면 조건을 고려하였다. 전단시험에 따르면 두개의 블록을 직접 접촉시킨 경우 전단하중-전단변위 관계가 탄성-완전소성형태와 유사하였으며 블록 사이의 접촉면에 고무패드를 설치한 경우 전단하중-전단변위 관계는 연성거동을 보였다. 블록과 블록을 직접 접촉시킨 경우와 블록과 블록 사이의 접촉면에 고무패드를 설치한 경우 그리고 블록과 블록 접촉면 사이에 고무패드와 전단키를 설치한 경우에 대한 최소 전단저항력과 겉보기 마찰각은 각각 1.7kN/m, $27.6^{\circ}$와 4.2kN/m, $26.2^{\circ}$ 그리고 20.9kN/m, $26.0^{\circ}$이었다.

• 한국지반환경공학회 논문집
• /
• 제18권3호
• /
• pp.5-14
• /
• 2017

극한지 동결 지반에서 구조물의 설계 및 시공이 진행됨에 따라, 안정성 평가를 위해 동결토의 강도 특성에 대한 실험적 연구가 필수적이다. 본 연구의 목적은 전단 상자 시스템에 따른 동결토의 강도를 평가하는 것으로, 이를 위하여 보편적으로 사용되는 기존 직접전단 시스템(Type-1), 상부 전단 상자 위쪽에 롤러를 설치한 시스템(Type-2), 그리고 상부 전단 상자를 하부 전단 상자와 분리되도록 기둥으로 고정한 시스템(Type-3)을 제작하였다. 모든 시스템에는 모래, 실트, 그리고 증류수를 동일한 비율로 혼합한 시료를 이용하여 조성하였으며, 냉동 챔버 내에서 $-5^{\circ}C$까지 동결된 후 연직 응력 5, 10, 25 그리고 50kPa을 가하며 직접전단실험을 수행하였다. 실험 결과, Type-1은 전단 이동에 따라 상부 전단 상자가 회전(rotation)하여 하부 전단 상자와 접촉하는 문제가 발생했다. 상부 전단 상자의 회전을 롤러로 방지한 Type-2의 경우, 회전을 막는 힘이 전단강도에 추가되어 강도가 과대 평가되었다. Type-3의 경우, 동결 시료만의 전단강도가 평가되었으며, 최대전단강도 발현 시점과 수직변위가 증가하기 시작하는 시점이 유사하게 나타났다. 또한, Type-3의 최대전단강도와 잔류전단강도의 내부마찰각과 점착력은 롤러의 영향이 제거되어 Type-2보다 작게 나타났다. 본 연구는 동결토와 같이 강도가 큰 시료의 경우 Type-3과 같이 개선된 전단 상자 시스템을 이용하여 동결토만의 강도를 평가할 수 있음을 보여준다.

• Geomechanics and Engineering
• /
• 제35권2호
• /
• pp.209-219
• /
• 2023

This paper presents numerical investigations into the particle crushing effect on the shear properties of gravel under direct shear condition. A novel particle crushing model was developed based on the octahedral shear stress criterion and fragment replacement method. A series of direct shear tests were carried out on unbreakable particles and breakable particles with different strengths. The evolutions of the particle crushing, shear strength, volumetric strain behavior, and contact force fabric during shearing were analyzed. It was observed that the number of crushed particles increased with the increase of the shear displacement and axial pressure and decreased with the particle strength increasing. Moreover, the shear strength and volume dilatancy were obviously decreased with particle crushing. The shear displacement of particles starting to crush was close to that corresponding to the peak shear stress got. Besides, the shear-hardening behavior was obviously affected by the number of crushed particles. A microanalysis showed that due to particle crushing, the contact forces and anisotropy decreased. The mechanism of the particle crushing effect on the shear strength was further clarified in terms of the particle friction and interlock.