• Journal of Korean Institute of Industrial Engineers
• /
• v.3 no.2
• /
• pp.41-55
• /
• 1977

The physical distribution system is composed of all the activities associated with getting products from the factory to the consumer through the firm's channels of distribution. An increasing amount of attention has been recently devoted to the component problems associated with distribution system analysis. This paper analyzes effect of system parameters which are safety factor of depot's stock, limitation of direct supply from shop stock to customer and ordering quantity on the physical distribution cost and the evaluated items by the Simulation. The distribution system simulator views system as being composed of three structural entities, presents a case study of a Chemical manufactures and carried on one year computer running.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.558-560
• /
• 2003

The effects of surge arresters for protection of transmission systems against direct lightning strokes have already been investigated using the digital simulation program EMTP. Distribution lines are spanned on a much large area as compared to transmission lines, and therefore, are more often susceptible to lightning strokes. This paper analyzes the overvoltages on underground cable system against direct lightning strokes to the overhead ground wire using the digital simulation. The effects of lightning protection methods, such as lowering the grounding resistance and installing the surge arrester, for preventing overvoltages on underground cable system caused by direct lightning strokes to the overhead ground wire is investigated. Several schemes have been proposed to protect underground cables. This paper summarizes the main results of a study aimed at analysis of lightning overvoltages in variety underground feeders protected by metal-oxide arresters. This study will provide insulation coordination methods for reasonable system design in 22.9kV underground cable system.

• KIEE International Transactions on Power Engineering
• /
• v.5A no.2
• /
• pp.171-176
• /
• 2005

The effects of surge arresters for the protection of transmission systems against direct lightning strokes have already been reviewed by many researchers. However, their studies have not encompassed underground cable systems. Therefore, in this paper we investigate the 22.9kV combined distribution systems that have arresters and ground wires. In addition, we analyze the overvoltages on underground distribution cable sections when direct lightning strokes contact the overhead ground wire using EMTP. Finally, we discuss the effect of lightning strokes according to the change of cable length and installation of arresters. This study provides insulation coordination methods for reasonable system design in 22.9kV underground distribution cable systems.

• 유체기계공업학회:학술대회논문집
• /
• 2002.12a
• /
• pp.370-377
• /
• 2002

Generally, the system of calculation for the multi-path ultrasonic flow meters can be divided into two methods by how to get the mean velocity, namely, weighting and direct method. Weighting-method derive the mean velocity through modeling in theoretical velocity profile. Direct-method derive the mean velocity though actual flow distribution. The system of calculation varies with maker's transducer configuration and integration method. Each system has merits and demerits. This paper describes the system of integration that calculates line velocity over cross-section of the circular pipe. Flow rate mr discussed in this paper is a difference between theoretical flow rate and integrated flow rate according to values of Reynolds number in symmetric flow field or theoretical flow rate and integrated flow rate according to rotated model in asymmetric flow field.

• International Journal of Automotive Technology
• /
• v.2 no.4
• /
• pp.165-170
• /
• 2001

This study is focussed on the investigation of spray characteristics from the high pressure gasoline injector for the application of gasoline direct injection engine. For the analysis of spray structure of high pressure gasoline injector; the laser scattering method with a Nd-Yag laser and the Phase Doppler particle analyzer system were applied to observe the spray development and the measurement of the droplet size and velocity of the spray, respectively. Also spatial velocity distribution of the spray droplet was measured by use of the particle image velocity system. Experimental results show that high pressure gasoline injector shapes the hollow-cone spray, and produce the upward ring shaped vortex on the spray surface region. This upward ring shaped vortex promotes the secondary atomization of fuel droplets and contributes to a uniform distribution of fuel droplets. Most of fuel droplets are distributed under 31$\mu m$ of the mean droplet size (SMD) and the frequency distribution of the droplet size under 25$\mu m$ is over 95% at 7 MPa of injection pressure. According to the experimental results of PIV system, the flow patterns of the droplets velocity distribution in spray region are in good agreement with the spray macroscopic behaviors obtained from the visualization investigation.

• 수도
• /
• v.24 no.3 s.84
• /
• pp.4-102
• /
• 1997

• 수도
• /
• v.24 no.3 s.84
• /
• pp.112-123
• /
• 1997

• Journal of Distribution Research
• /
• v.4 no.1
• /
• pp.141-159
• /
• 1999

The establishment of EDI system significantly transforms the relationship among channel members. This study investigates the relationship between buying and selling companies who use the EDI system. The results of this study are summarized as follows. First, the establishment of the EDI system has a positive effect on the task effectiveness, cost and competitiveness regardless of buying and selling companies. Second, the establishment of EDI system does not affects direct and indirect trust in both companies. Third, the effects of task effectiveness and cost are not related with the perceived or behavioral trust.

• KIEE International Transactions on Power Engineering
• /
• v.5A no.4
• /
• pp.371-377
• /
• 2005

Congestion problems of transmission lines are very important research issues in power system operations. Load curtailment is one of the ways to solve congestion problems by a major contingency. A systematic and effective mechanism for load shedding has been developed by investigating congestion distribution factors and the direct load control program. In this paper, a load shedding algorithm using linear programming for congestion problems by a major contingency is presented. In order to show the effectiveness of the proposed algorithm, it has been tested on the 6-bus sample system and the power system of Korea, and their results are presented.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.1
• /
• pp.205-213
• /
• 2008

Servicizing is defined 'not as to sell the products but as to sell the functions'. This study was done on the methods for revitalization as the object items of navigation & antenna among car parts. The direct door-to-door survey was done for 101 enterprises (direct-management stores) and percentage & t-test were done for statistics. The results can be summarized like followings. First, PR on servicizing is required. Second the optimized methods can be obtained by incorporating reuse & recycling distribution systems of servicizing with the existing recovery system Reuse distribution system can be constructed rationally because inventory control is being done correct1y with the periodic recovery. Finally, as for the analysis on the relative importance of main factors of servicizing, it shows that supports & providing the concrete frame of the government & local autonomous body are important.