• Journal of Korean Society of Forest Science
• /
• v.3 no.1
• /
• pp.28-31
• /
• 1963

Recognizing shortcomings and unreasonable points of the usual methods of measurement of the standing-tree volume, author contrived measurement formula of standing-tree volume which is based on stem-curve equation, $y^2=2px$, resulted from the analysises and experiments on stem-curve by differentiation & integration. The results of this study are as follows ; (1) The following is the formula. $V=1/2g_{1.2}$(h+1.2) V=volume of tree $g_{1.2}$ = sectional area at breast heigh h = height of tree (2) So plain is the form of this formula that this formula is more convenient than usual formulas in measuring. (3) The percentage error of this formula is negative and it is remarkably superior to usual formulas except Pressler's formula, in other words, the higher the tree that is measured is, the more inaccurate become pressler's formula, and the percentage error of the breast-height form factor method is direct proportion to the grossness of the tree that is measured, but the higher the tree that is measured, the lower become percentage error of this formula in geometrical progression.

• Structural Engineering and Mechanics
• /
• v.4 no.1
• /
• pp.25-35
• /
• 1996

This paper describes a continuum variational formulation for design optimization of nonlinear structures in the elastic-plastic domain, where unloading and reloading of the structures are allowed to occur. The Total Lagrangian procedure is used for the description of the structural deformation. The direct differentiation approach is used to derive the sensitivities of the various structural response measures with respect to the design parameters. Since the material goes into the inelastic range and unloading and reloading of the structure are allowed to occur, the structural response is path dependent and an additional step is needed to integrate the constitutive equations. It can be shown, consequently, that design sensitivity analysis is also path-dependent. The theory has been discretized by the finite element technique and implemented in a structural analysis code. Mathematical programming approach is used for the optimization process. Numerical applications on trusses are performed, where cross-sectional areas and nodal point coordinates are treated as design variables. Optimal designs have been obtained and compared by using two different strategies: a two level strategy where the levels are defined accordingly the type of design variables, cross sectional areas or node coordinates, and optimizing simultaneously with respect to both types of design variables.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.5
• /
• pp.327-337
• /
• 2000

In this paper, the design sensitivity formula for the control of the transient temperature distribution is developed using the direct differentiation method, and used for the optimal design of induction heating coil position. The temperature distribution is calculated using the heat source of the induced eddy current and heat diffusion equation. The physical property variations of the workpiece depending on the temperature are considered. The eddy current distribution and the temperature distribution are calculated with the 2D finite element procedure. The adjoint variable technique is employed in expressing the design sensitivity. The goal of the design is to have the desired distribution of the temperature on a specific region of the sensitivity. The goal of the design is to have the desired distribution of the temperature on a specific region sensitivity. The goal of the design is to have the desired distribution of the temperature on a specific region of the workpiece. The numerical example shows that the proposed design sensitivity analysis for the control of the transient temperature distribution is very useful and practical in the optimal design of induction heating coils.

• Structural Engineering and Mechanics
• /
• v.71 no.1
• /
• pp.45-56
• /
• 2019

A modified mechanical model of pre-pressed spring self-centering energy dissipation (PS-SCED) brace is proposed, and the hysteresis band is distinguished by the indication of relevant state variables. The MDOF frame system equipped with the braces is formulated in an incremental form of linear acceleration method. A multi-objective genetic algorithm (GA) based brace parameter optimization method is developed to obtain an optimal solution from the primary design scheme. Parameter sensitivities derived by the direct differentiation method are used to modify the change rate of parameters in the GA operator. A case study is conducted on a steel braced frame to illustrate the effect of brace parameters on node displacements, and validate the feasibility of the modified mechanical model. The optimization results and computational process information are compared among three cases of different strategies of parameter change as well. The accuracy is also verified by the calculation results of finite element model. This work can help the applications of PS-SCED brace optimization related to parameter sensitivity, and fulfill the systematic design procedure of PS-SCED brace-structure system with completed and prospective consequences.

• Structural Engineering and Mechanics
• /
• v.85 no.3
• /
• pp.369-379
• /
• 2023

Reliability-Based Design Optimization (RBDO) is an appropriate framework for obtaining optimal designs by taking uncertainties into account. Large-scale problems with implicit limit state functions and problems with discrete design variables are two significant challenges to traditional RBDO methods. To overcome these challenges, this paper proposes a hybrid method to perform RBDO of structures that links Firefly Algorithm (FA) as an optimization tool to advanced (finite element) reliability methods. Furthermore, the Genetic Algorithm (GA) and the FA are compared based on the design cost (objective function) they achieve. In the proposed method, Weighted Simulation Method (WSM) is utilized to assess reliability constraints in the RBDO problems with explicit limit state functions. WSM is selected to reduce computational costs. To performing RBDO of structures with finite element modeling and implicit limit state functions, a First-Order Reliability Method (FORM) based on the Direct Differentiation Method (DDM) is utilized. Four numerical examples are considered to assess the effectiveness of the proposed method. The findings illustrate that the proposed RBDO method is applicable and efficient for RBDO problems with discrete and continuous design variables and finite element modeling.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.7
• /
• pp.90-99
• /
• 1996

In the area of assembly process of micro-chips and electronic parts on the printed circuit board, surface mounting device(SMD) is used as a fundamental tool. Generally speaking, the motion of the SMD is based on the ball screw system operated by any type of actuators. The ball screw system is a mechanical transformed which converts the mechanical rotational motion to the translational one. Also, this system could be considered as an efficient motion device against mechanical backlash and friction. Therefore a dynamic modeling and state sensitivity analysis of the ball screw system in SMD have to be done in the initial design stage. In this paper, a simple mathematical dynamic model for this system and the sensit- ivity analysis are mentioned. Especially, the bond graph approach is used for graphical modeling of the dynamic system before analysis stage. And the direct differentiation method is used for the state sensit- ivity analysis of the system. Finally, some trends for the state variables with respect to the design variables could be suggested for the better design and faster operating based on the results of dynamic and state sensitivity.

• The Korea Journal of Herbology
• /
• v.38 no.4
• /
• pp.31-43
• /
• 2023

Objectives : The objective of this study was to investigate the phytochemistry and pharmacological activities of Cirsium setidens. Methods : Domestic and international articles about Cirsium setidens were investigated. A review was perfoemed via DB searching engine such as Sci.Direct, Springer, DBpia, KISS, Google scholar, Kipris, and so on. Total 73 listed literature were classified by compound analysis and pharmacological efficacy. Results : C. setidens contains pectolinarin and its glycoside, pectolinarigenin as index compounds, and linarin, apigenin, diosmetin, scopoletin, acacetin, cirsimarin, cirsimaritin, setidenosides A and B, silymarin, hispidulin, 92 volatile compounds, and 15 fatty acids. The Pharmacological activities of C. setidens has been reported to inhibit of platelet aggregation and fat accumulation in the liver, inhibit to hepatitis, anti-cancer, antibacterial, skin improvement, hair growth, liver protection, anti-diabetic, anti-inflammatory, sedative. Also, It has been reported the effect of cholesterol-lowering and anti-obesity, neuroprotective effects, increasing human stem cell viability, inhibiting osteoclast formation and osteogenic differentiation. Conclusion : This reviews showed that C. setidens which has been traditionally used for the treatment of inflammation and hypertension, has anticancer and river protective effect, as well as hair loss and diet. In order to maximize the efficacy of C. setidens, research has also begun on the effect of processing processes such as fermentation or fine powdering and combining natural plant resources.

• IMMUNE NETWORK
• /
• v.22 no.5
• /
• pp.38.1-38.24
• /
• 2022

Exosomes, which are well-known nanoscale extracellular vesicles, are multifunctional biomaterials derived from endosomes and perform various functions. The exosome is a critical material in cell-cell communication. In addition, it regulates the pathophysiological conditions of the tumor microenvironment in particular. In the tumor microenvironment, exosomes play a controversial role in supporting or killing cancer by conveying biomaterials derived from parent cells. Innate immunity is a crucial component of the host defense mechanism, as it prevents foreign substances, such as viruses and other microbes and tumorigenesis from invading the body. Early in the tumorigenesis process, the innate immunity explicitly recognizes the tumor via Ags and educates the adaptive immunity to eliminate it. Recent studies have revealed that exosomes regulate immunity in the tumor microenvironment. Tumor-derived exosomes regulate immunity against tumor progression and metastasis. Furthermore, tumor-derived exosomes regulate polarization, differentiation, proliferation, and activation of innate immune cells. Exosomes produced from innate immune cells can inhibit or support tumor progression and metastasis via immune cell activation and direct cancer inhibition. In this study, we investigated current knowledge regarding the communication between tumor-derived exosomes and innate immune cell-derived exosomes (from macrophages, dendritic cells, NK cells, and neutrophils) in the tumor microenvironment. In addition, we discussed the potential development of exosomal immunotherapy using native or engineered exosomes against cancer.

• IMMUNE NETWORK
• /
• v.16 no.5
• /
• pp.281-285
• /
• 2016

CD4⁺ regulatory T cells (Tregs) are essential for normal immune surveillance, and their dysfunction can lead to the development of autoimmune diseases, such as type-1 diabetes (T1D). T1D is a T cell-mediated autoimmune disease characterized by islet b cell destruction, hypoinsulinemia, and severely altered glucose homeostasis. Tregs play a critical role in the development of T1D and participate in peripheral tolerance. Pluripotent stem cells (PSCs) can be utilized to obtain a renewable source of healthy Tregs to treat T1D as they have the ability to produce almost all cell types in the body, including Tregs. However, the right conditions for the development of antigen (Ag)-specific Tregs from PSCs (i.e., PSC-Tregs) remain undefined, especially molecular mechanisms that direct differentiation of such Tregs. Auto Ag-specific PSC-Tregs can be programmed to be tissue-associated and infiltrate to local inflamed tissue (e.g., islets) to suppress autoimmune responses after adoptive transfer, thereby avoiding potential overall immunosuppression from non-specific Tregs. Developing auto Ag-specific PSC-Tregs can reduce overall immunosuppression after adoptive transfer by accumulating inflamed islets, which drives forward the use of therapeutic PSC-Tregs for cell-based therapies in T1D.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.2
• /
• pp.309-317
• /
• 2000

Bisphosphonates inhibit bone resorption in vivo and in vitro. Currently proposed mechanism of action of bisphosphonates involves both direct effect on osteoclasts and indirect effect through the mediation of osteoblasts. Recent understanding of molecular mechanism of osteoclastogenesis indicates that osteoclast differentiation is quite tightly regulated by signaling molecules from differentiating osteoblasts. Therefore this investigation was designed to elucidate the effect of bisphosphonate on osteoblast differentation. For this purpose, in vitro effects of etidronate and alendronate on the expression of Cbfa1 a master control gene of osteoblast differentiation, several bone marker genes, and formation of calcified nodules were evaluated. To evaluate the effect of bisphosphonate on calcified nodule formation, osteoblasts isolated from rat calvaria were cultured in a-MEM containing $10^{-4},\;10^{-5},\;10^{-6}M$ of etidronate or $10^{-6},\;10^{-7},\;10^{-8}M$ of alendronate for 15 days, and then stained by alizarin red to determine mineralization. To evaluate the effect of bisphosphonate on osteoblast differentiation, osteoblast cells were cultured in a-MEM containing $10^{-4},\;10^{-5},\;10^{-6}M$ of etidronate or $10^{-6}$ M of alendronate for 8 days. And then total RNA was extracted and northern blot analysis was done to examine the expression of Cbfa1, type I collagen, alkaline phosphatase, osteopontin and osteocalcin. The results were as follows: 1. Etidronate suppressed the calcification of bone nodule in dose dependent manner, while alendronate didn't. 2. The expression of Cbfa1 was decreased dose dependently by etidronate, but increased by alendronate. 3. Etidronate suppressed the expression of type I collagen, osteopontin and osteocalcin in dose dependent manner however alendronate promote the expression of osteoblast marker gene. 4. The expression of alkaline phosphatase was not affected either etidronate nor alendronate. These results suggest that etidronate suppressed the expression of Cbfa1 in dose dependent manner, and consequently the expression of osteoblast marker genes, such as type I collagen, osteopontin and osteocalcin were also suppressed in similar manner. And finally this decreased expression of osteoblastic marker gene prevent calcined bone nodule formation.