• Journal of Bio-Environment Control
• /
• v.15 no.1
• /
• pp.91-99
• /
• 2006

This study was conducted to determine the influence of postharvest dipping treatment with aminoethoxyvinylglycine (AVG) on ethylene production and composition of non-cellulosic neutral sugars in cell walls of 'Tsugaru' apple fruits during storage. Fruits were harvested on August 20, soaked in AVG 50 and 75 $mg L^{-1}$ solution for 5 minutes, and stored in cold storage chamber at $0{\pm}1^{\circ}C$ for 60 days. Fruit quality factor, ethylene productions, and cell wall component changes were investigated at 20 days interval. As a result, the fruit firmness and acid content were much higher in AVG treated fruits than those of untreated one during 60 days of cold storage. Ethylene production of AVG treated fruits was reduced to the level of 1/10 compared with untreated one. As to the change of non-cellulosic neutral sugars in the cell walls of 'Tsu- garu' fruits, the major sugar was arabinose and galactose in water, CDTA and $Na_2CO_3$ soluble fractions. The content of arabinose and galactose in untreated fruits increased as the softening of fruits was in progress, but the fruits treated with AVG showed a little change during storage, so it is predicted that these two cell wall compositional sugars were not solubilized by the treatment of AVG. Accordingly, the marketability of 'Tsu- garu' fruits could remarkably increase when soaking the fruits in AVG solution after harvest.

• The Plant Pathology Journal
• /
• v.26 no.4
• /
• pp.372-379
• /
• 2010

Macrophomina phaseolina causing charcoal rot was isolated from sesame seeds (cvs. Giza 32 and Shandawel-3) collected from different localities of Assiut, Sohage and El-Minia Governorates. The fungus was found in the highest frequently in samples collected from Assiut Governorate followed by Sohag and finally EL Minia Governorate. The obtained isolates were different in their virulence on the tested sesame cvs. Also, they differed in their growth nature including colony color and sclerotial production. The color of colonies of the pathogen seem to be correlated with density of sclerotial formation. Aqueous extracts of Majorna, Wild chamomile, Geranium oil and Nees plants were highly toxic to tested isolates of M. phaseolina, in vitro. On the other hand the rest of the tested aqueous extracts had no effect. Under greenhouse conditions in 2005 and 2006 seasons, soaking seeds of sesame before sowing in aqueous extracts of Eucalyptus, Nerium, Ocimum and Roesmary plants decreased the disease incidence. Aqueous extracts of Eucalyptus and Ocimum were the most effective treatment. Dipping sesame seeds in hot water at $60^{\circ}C$ for 5 minutes increased seed germination of Giza 32 and Shandawel-3 cvs. followed by $55^{\circ}C$, $50^{\circ}C$ and $45^{\circ}C$, while $40^{\circ}C$ treatment resulted the lowest seed germination rate. Dipping sesame seeds in hot water at different temperature before planting decreased seed, seedling and charcoal rots. Soaking seeds in hot water at $60^{\circ}C$ increased greatly plant height and decreased seed, seedling rot and charcoal rot followed by $55^{\circ}C$ and $50^{\circ}C$, under greenhouse condition.

• Textile Coloration and Finishing
• /
• v.16 no.3
• /
• pp.14-21
• /
• 2004

In this research, we accomplished in order to improving color fastness of sublimation for Poly (vinyl alcohol) (PVA)-iodine polarized film. The poor iodine sublimation problem has greatly improved by $O_2$ low temperature plasma treatment. We obtained the followings: (1) plasma treatment has contributed in adhesive ability via peel strength, AFM image and roughness were investigated, But the improvement in adhesive strength was not linearly proportional to the treatment time. (2) $O_2$ plasma treated PVA-iodine polarized film was good enough as to maintain the transmittance and polarization even after iodine cone. of 0.05mol/L and dipping time of 50sec. (3) $O_2$ low temperature plasma treated PVA-iodine polarized film has obtain high durability because of good adhesive strength.

• Korean Journal of Food Science and Technology
• /
• v.41 no.5
• /
• pp.578-586
• /
• 2009

This study was conducted to determine the effects of alkaline electrolyzed water (AIEW), acidic electrolyzed water (AcEW), 1% citric acid, and 100 ppm sodium hypochlorite, either alone or in combination with citric acid, in reducing the populations of spoilage bacteria and foodborne pathogens (Listeria monocytogenes and Escherichia coli O157:H7) on lettuce at various exposure times (3, 5, and 10 min) with different dipping temperatures (1, 20, 40, and $50^{\circ}C$). In addition, the inhibitory effect of alkaline electrolyzed water combined with citric acid on the browning reaction during storage at $4^{\circ}C$ for 15 days was investigated. Compared to the untreated control, electrolyzed water more effectively reduced the number of total bacteria, mold, and yeast than 100 ppm sodium hypochlorite under the same treatment conditions. All treatments exposed for 5 min significantly reduced the numbers of total bacteria, yeast, and mold on head lettuce. The inactivation effect of each treatment on head lettuce was enhanced as the dipping temperature increased from 1 to $50^{\circ}C$, but there was no significantly difference at temperatures greater than $40^{\circ}C$ (p<0.05). The total counts of yeast and mold in head lettuce were completely eliminated when a combination of 1% citric acid and AlEW treatment was used at temperatures greater than $40^{\circ}C$. However, decreased reduction in L. monocytogenes (2.81 log CFU/g), and E. coli O157:H7 (2.93 log CFU/g) on head lettuce was observed under these treatment conditions. In addition, enhanced anti-browning effect was observed when the samples were subjected to both 1% citric acid and AlEW treatment at temperatures greater than $40^{\circ}C$ compared to when single treatments alone were used. Thus, this combined treatment might be considered a potentially beneficial sanitizing method for improving the quality and safety of head lettuce.

• Journal of Korean Society of Forest Science
• /
• v.106 no.1
• /
• pp.26-32
• /
• 2017

We studied the effects of dip treatments of natural extracts (Camellia sinensis, Angelica gigas, Astragalus membranaceus, Glycyrrhiza uralensis: 1% extract) on the quality of peeled 'Daebo' chestnut. After dipping treatment peeled chestnuts were vacuum packaged with $75{\mu}m$ PE+Nylon 7-layer film then stored in $4^{\circ}C$ incubator for 35days. The quality changes including the surface color and off-odor were evaluated for storage days. The natural extracts dipping treatment on peeled chestnut was effective on skin browning inhibition. Especially, Astragalus membranaceus and Glycyrrhiza uralensis extract treatments was significantly effective in reducing surface browning. The color change (${\Delta}E$) of peeled chestnut was the highest (5.6) in control, whereas that was the lowest (3.4) under Astragalus membranaceus extract treatment at 35 storage day. The natural exteacts treatments had no effect on the weight, the mositure loss rate, the firmness and the soluble solid contencts of peeled chestnuts during storage after treatment. The decaying rate of peeled chestnut was 9.0% in control, 9.0% in Camellia sinensis extract treatment, 9.0% in Angelica gigas extract treatment, 21.0% in Astragalus membranaceus extract treatment, and 7.0% Glycyrrhiza uralensis extract treatment at 35 storage day. Sensory evaluation revealed significant differences in off-odor and color attributes. After all, the score of overall sensory evaluation was the lowest in Astragalus membranaceus extract treatment and the highest in Glycyrrhiza uralensis extract treatment. As the results, the natural extract treatments, especially with vacuum packing after Glycyrrhiza uralensis extract treatment, extended the shelf-life of the peeled chestnut by inhibiting the surface browning.

• Journal of the Korean Ceramic Society
• /
• v.30 no.7
• /
• pp.589-597
• /
• 1993

The optimum sol solution for making alumina membrane was synthesized by using sol-gel method with aluminium isopropoxide. Two types of supports were made from the $\alpha$-Al2O3 powder. The porosities of supports could be controlled by the forming methods and the heat treatment conditions. After the support was coated with optimum sol solution and heat-treated at 50$0^{\circ}C$ for 1hour, the thickness of crack-free membrane could be controlled reproductively with dipping time.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.283-284
• /
• 2003

습식응고법에 의한 다공성 폴리우레탄-부직포 합성피혁은 일반적으로 DMF 또는 MEK 둥의 용제로 희석한 폴리우레탄 수지에 니들펀칭 부직포를 함침하여 기포를 준비한 후, 폴리우레탄으로 코팅하여 비용매인 물에서 응고하는 방법으로 제조한다. 따라서 합성피혁은 부직포의 물성, 함침조건, 코팅조건 및 응고조건에 따라 물성의 차이를 나타낼 것으로 판단된다[l]. 특히 합성피혁의 물성은 폴리우레탄 코팅층의 내부에 형성되는 셀(cell)의 크기, 분포 및 형태에 크게 의존한다. (중략)

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.159-162
• /
• 2000

Interfacial and microfailure properties of carbon fiber/epoxy matrix composites were evaluated using both tensile fragmentation and compressive Broutman tests with acoustic emission (AE). Amino-silane and maleic anhydride polymeric coupling agents were used via the dipping and electrodeposition (ED), respectively. Both coupling agents exhibited higher improvements in interfacial shear strength (IFSS) under tensile tests than compressive cases. However, ED treatment showed higher IFSS improvement than dipping case under both tensile and compressive test. The typical microfailure modes including fiber break, matrix cracking, and interlayer failure were observed during tensile test, whereas the diagonal slippage in fiber ends was observed during compressive test. For both the untreated and treated cases AE distributions were separated well under tensile testing. On the other hand, AE distributions were rather closer under compressive tests because of the difference in failure energies between tensile and compressive loading. Under both loading conditions, fiber breaks occurred around just before and after yielding point. Maximum AE voltage fur the waveform of carbon or basalt fiber breakage under tensile tests exhibited much larger than those under compressive tests.

• Food Science and Preservation
• /
• v.6 no.3
• /
• pp.276-280
• /
• 1999

To maintain the quality characteristics of vegetables, produce was dipped in Korean medical herb extracts (KMHE) such as Rheum palmatum L. or Coptis chinensis Franch with different concentration. Dipping in 500 ppm KMHE solution was suitable for the reduction or microbial load on cucumber, and 100 ppm KMHE solution was appropriate for others. Dipping time was suitable for produce about 10 minutes, and the temperature of dining solution had a limited effect cm the microbial load reduction. Antimicrobial activity of Coptis chinensis Franch and Rheum palmatum L. was maintained for cucumber and zucchini wrapped with polyvinylchloride film during storage at 10$^{\circ}C$.

• Journal of agriculture & life science
• /
• v.46 no.5
• /
• pp.37-45
• /
• 2012

This study was carried out to examine the optimal treatment conditions of ethanol and glycerine for processing technology development of preserved flowers in carnation (Dianthus caryophyllus) 'Desio' commonly used for flower design. For this purpose, effects of dipping duration of ethanol solution and treatment duration and concentration of glycerine on preserved flower quality were evaluated. Ethanol treatment resulted in perfect dehydration and decoloration of petals and it was proper at 24~48 hours under high brightness and low chroma. Appropriate concentration and time of glycerine treatment was 30% at 36 hours because it resulted in Munsell value of 4.0R in Hue, 6.49 in Value, and 19.8 in Chroma (4.0R 6.49/14) representing the most approximate value to that of fresh petals. Decreasing rate in weight after desiccation tended to reduce by longer time of immersing and higher concentration. Weight after 12 hours of immersing reduced up to 86~90% according to treatment time in non-treatment group of glycerin, meanwhile, it reduced up to 51~69% under higher concentration of 40%. However, weight after 48 hours of immersing reduced up to 90% regardless of desiccation time in non-treatment group of glycerine, to the contrary, decreasing rate reduced by 46~54% through glycerine treatment of 40%. Time for desiccation required 24 hours in glycerin concentration of 10~20% except 6 hours of immersing time, however, higher concentration resulted in increased time up to 48 hours.