• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.2003-2005
• /
• 2004

본 논문에서는 패러데이 효과(Faraday effect)를 이용하여 초고압 전력설비에서 대전류 측정을 위한 광CT의 온도변화에 따른 특성에 대한 기초 연구를 하였다. 광원으로는 1310[nm] Laser Diode를 사용하고 수신부로는 PIN-Photodiode를 사용하였다. 실험을 위한 온도변환장치는 GIS와 같은 모양으로 재철은 알루미늄으로서 제작하였다. 광의 전송로는 파이버 내에서 편광상태를 유지할 수 있는 30[m]의 싱글모드 언재킷(unjacked) 파이버를 사용하였다. 전류의 측정은 400[A]에서 1300[A] 까지의 범위에서 측정하였으며 온도는 -40[$^{\circ}$]에서 50[$^{\circ}$]까지 10[$^{\circ}$]씩 증가시키면서 측정하였다. 이 때 출력선호는 인가전류의 중가에 따라 비례하여 증가하였으며 주변온도가 높을수록 비례하여 증가하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.201-201
• /
• 2009

반도체 레이저 다이오드(laser diode)는 도파로 내부의 굴절률 변화로 발생하는 필라멘테이션(filamentation) 문제와 벽개면 손상으로 인한 catastrophic optical damage(COD) 문제로 고품위/고출력 발진이 제한된다. 양자점 (quantum dot) 레이저 다이오드는 델타 함수 형태의 상태 밀도를 갖기 때문에 이론적으로는 zero 값의 선폭증가요소 특성을 가져 고출력 동작 시 필라멘테이션 문제를 제거할 수 있다. 또한 고출력 동작을 위한 COD 문제는 낮은 광 밀도를 갖는 활성층/도파로 영역의 에피구조 최적화를 통해 해결할 수 있다. 본 논문에서는 고출력 808 nm 양자점 반도체 레이저 다이오드 개발을 위한 에피구조 설계 및 최적화 연구를 수행하였다.

• ETRI Journal
• /
• v.27 no.3
• /
• pp.334-336
• /
• 2005

We improved the performance of the spectrum-sliced light source for wavelength-division-multiplexed passive optical networks by employing a Fabry-Perot laser diode(FP-LD). We found that the FP-LDs can suppress the intensity noise as significantly as using a gain-saturated semiconductor optical amplifier. The transmission characteristics were measured and analyzed in both conditions with and without employing an FP-LD.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.12-17
• /
• 2009

We have implement어 a bust mode optical transmitter using digital temperature compensation architecture with a microprocessor. Instead of previous analog real time technique, we used digital sampling and holding technique for the temperature compensation in order to get stable high speed data transmission of the laser diode. This digital temperature compensation technique should be complemented the previous analog method with accuracy and effectiveness in the over Gb/s transmitting application.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2001.11a
• /
• pp.111-114
• /
• 2001

Optical transmitter and receiver are the essential components for optical communication. For these components, butterfly type packages are used which are comprised of metal housing, multilayer ceramic inserts, lead and window. In this study, 2.5 Gbps DFB(Distributed -Feedback) LD(Laser Diode) package was fabricated and characterized. Metal housing showed good thermal conductivity (200W/mK) and well matched TCE(6.7ppm/K) with GaAs chip. Ceramic inserts also showed good VSWR(Voltage Standing Wave Ratio) characteristics(<2.0). By brazing technology, all the elements were combined and sealed. RF characteristics of the package mounted on the PWB was also tested.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.338.2-338.2
• /
• 2016

Al doped ZnO (AZO) thin films were deposited on Si substrates with rod-shaped-surface by pulsed laser deposition method (PLD). Si-rods were prepared through chemical etching. To analyze the influence on the formation of the rod structure, samples with various chemical etching conditions such as AgNO3/HF ratio, etching time, and solution temperature were prepared. The morphology of Si-rod structures were examined by FE-SEM. Fig. 1 shows a typical structure of n-AZO/p-Si-rod juncions. The fabricated n-AZO/p-Si-rod devices exhibited p-n diode current-voltage characteristics. We compared the I-V characteristics of n-AZO/p-Si-rod devices with the samples without Si-rod structure.

• Electrical & Electronic Materials
• /
• v.7 no.6
• /
• pp.549-556
• /
• 1994

광전변화소자(Photo electric conversion device)는 광전효과-내부 광전효과(광도전 및 광기전력) 및 외부광전효과(광전자방출)을 이용하여 광을 전기신호로 변화시키는 소자를 광전자소자라 하며, 광전자 및 양자전자공학의 발전과 함께 많은 개발이 되고 있다. 이 광전변환소자는 주로서 고체박막의 재료를 이용하며, 소자의 소형화, 고성능화, 고신뢰성등의 요구와 함께 광전기술연구가 활발하게 진행되고 있다. 현재 광전소자의 광의 파장은 가시부만이 아니고, X선으로 부터 적외선까지에 걸쳐 있다. 이 파장에 대응하여 각종의 단결정이 필요하고, 소자의 설계가 요구된다. 이들의 응용은 소자의 광의 발진, 증폭, 검출의 소자만이 아니고 변조, 편향, 기록, 전달로등 다종다양의 기능을 갖는 소자가 요구되고 있다. 이들의 Optoelectronic Device의 연구가 활발하게 진행되어 새로운 광전소자의 제품이 개발되고 있어, 이에 대한 소개를 하고져 한다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1990.10a
• /
• pp.23-27
• /
• 1990

A new signal processing system for real time displacement measurement in sinusoidal phase modulating interferometry is described. Although sinusoidal phase modulating interferometry is effective in measuring with high accuracy the displacement of an object, conventional signal processing takes a long time. In this method, detection of the object's displacement is easily achieved by sampling the interference signal at those times that satisfy certain conditions and by processing the sampled signals with electric circuits in real time. The delay time of this signal processing system is < 45${\mu}$s. Specially in this paper we describe all electronic circuit and optical system design

• Korean Journal of Optics and Photonics
• /
• v.10 no.1
• /
• pp.1-4
• /
• 1999

A confocal microscope system was used to study the bursts of fluorescence photons from single dye molecules excited at 638 nm by a short-pulsed diode laser with a repetition rate of 17 MHz. A red dye, JA22, in ethylene glycol solution was used as a sample. The fluorescence decay curves of single molecules were acquired using a time-correlated single photon counting and analyzed by a maximum likelihood estimator. It was possible to measure the fluorescence decay times with an error probability of 21% at photon number of more than 40 per dye molecule.

• Korean Journal of Optics and Photonics
• /
• v.8 no.4
• /
• pp.255-259
• /
• 1997

In this paper, the result of a performance study on a home-built spinning disk type confocal microscope is presented. The confocal microscope was fabricated with a Nipkow disk made of the made of the microfilm. The throughput of the disk was 0.5%, allowing the observation of specimen with higher reflectivities only. A laser diode at 692.7nm was used as the light source. The topographic structures of a PC ROM and the CD ROM were observed with sufficient reliability, while the effect of the convolution of the beam size with the finite object size was found dominant. Also the shadowing effect by the etched pattern was observed.