• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.871-874
• /
• 2003

The T-5 Lamps developed in 1996 is the high efficiency fluorescent lamps, the lamps voltage is high, and the lamps current small because the lamps are slender tube of 16mm diameter. And so, the electrical characteristics of the Ballast for the lamps are different from of the Ballast for T-10 or T-8 lamps. Therefore, the know-how of the exclusive Ballast for the T-5 fluorescent lamps should be as soon as possible. We described the electrical and optical characteristics of the Electronic Ballast for T-5 Circular Fluorescent lamps. The developed Electronic dimming Ballast for T-5 Circular Fluorescent lamps has the 45% energy saving effects than the T-10 lamps. And it has the promotion of the THD less than 10%, CF less than 1.5%, Flickering less than 5% and 99% power factor. And it is available for two T-5 Circular fluorescent Lamps dimming, 22W and 40W.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권1호
• /
• pp.47-52
• /
• 2005

This paper presents dimming control system for automotive 35W metal halide discharge(MHD) lamp electronic ballast. HID lamp demands a highly efficient ballast and very complex control circuitry that can control complex transient state in applying to automotive. Therefore, in this paper, a microcontroller-based digital control method for the HID lamp ballast is presented for optimal control that can adapt complex transient state, steady state and various environments. In developed dimming system, the system is designed to control the lamp output voltage step by step(continuous) using microcontroller according to CdS sensor. Therefore the designed dimming control system give good driving condition to diver and realize the power control effectively. The results of the proposed system is verified through various experiment results.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1998년도 학술발표회논문집
• /
• pp.156-161
• /
• 1998

The purpose of this paper is to determine circuit parameters in the inverter part of the electronic dimming ballast for fluorescent lamps, that is adequate to use with the prevailing dimming controller IC. Firstly, the operating frequency characteristics are investigated by varying circuit parameters of electronic ballasts and are matched with the output characteristics of dimming ballast controller. Secondly, circuit parameter values are determined by using PSpice simulation and operating frequency characteristics. Finally its validity is verified from the electrical and light output characteristics on the prototype of the electronic dimming ballast.

• 한국조명전기설비학회지:조명전기설비
• /
• 제13권2호
• /
• pp.149-149
• /
• 1999

This paper is to present a selected method of circuit parameters in the inverter part of the electronic dimming ballast for fluorescent lamps, that is adequate to use with the prevailing dimming controller IC. Through the experiment result using the prototype of the electronic dimming ballast produced by this method, its validity is verified from the electrical and light output characteristics on fluorescent lamps. Also, it is feasible to remote automatic and passive control fur dimming electronic ballast as using a microprocessor, and we easily recognize the lamp condition owing to make a program indicate abnormal behavior for fluorescent lamp at PC screen.

• 조명전기설비학회논문지
• /
• 제13권2호
• /
• pp.17-23
• /
• 1999

이 논문에서는 현재 사용되고 있는 Dimming 형 IC의 특성에 최적인 전자식 안정기의 인버터내 회로상수를 결정하여 Dimming 형 전자식 안정기를 제작하였고, 제작된 안정기를 이용하여 형광램프의 전기적 특성과 광출력 특성을 비교하여 회로상수 선정법의 타당성을 증명하였다. 또한 제작된 Dimming 형 전자식 안정기를 마이크로프로세서를 이용하여 수동조작 뿐만 아니라 PC를 통한 원격자동제어가 가능하도록 하였고, 램프의 동작 상태, 주위 온도, 전자식 안정기의 이상유무를 PC의 화면상에 표시되도록 프로그램하여 원격제어시스템을 구축하였다.

• 산업기술연구
• /
• 제29권B호
• /
• pp.193-198
• /
• 2009

In this paper, we developed remote dimming control system of electronic ballast for 400W metal halide lamp. This ballast could limit ignition current and soft start-up technique by the inverter with LCsCp resonance tank. The dimming circuit can dim from 400W to 200W by varying of the inverter switching frequency. The PLM consists of coupling circuit, BPF(Band-Pass Filter), FSK(Frequency Shift Keying) Modem and ${\mu}$-controller(Micro Controller). By coupling electronic ballast with PLM, the system that able to dimming the lamp through PLM is demonstrated by experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.2085-2087
• /
• 1998

This paper presents the design method of a dimming electronic ballast for fluorescent lamps using a frequency control IC, and investigates the effects of circuit variables on its dimming characteristics. It is shown that effective dimming is possible with IC IR2151 for frequency control, and this leads to a feasible design of more smaller and cheaper dimming ballast. Five ballasts different in the values of the series inductance and capactance are designed, and their dimming characteristics are compared. As the result, the dimming range becomes more broader as the series inductance gets smaller and the capacitance larger. Thus appropriate selection of the values of L and C should be made according to the types of application site.

• 한국지능시스템학회논문지
• /
• 제17권4호
• /
• pp.540-545
• /
• 2007

본 논문에서는 지능형 Dimming Converter의 새로운 구조 및 설계 방법론을 소개하고 일련의 수치적인 실험을 통하여 제안된 모델 및 시스템을 평가한다. 기존의 형광 램프용 디밍 전자식 안정기는 전용의 디밍 IC를 사용하여 전자식 안정기 대비 최대 83%의 램프 및 안정기의 수명 연장을 가능하게 했다. 하지만 이러한 장점은 사용자가 디밍 컨트롤 스위치를 통하여 수동으로 제어를 해야 하는 불편함뿐만 아니라, 수동 제어가 불가능 할 경우 에너지 절약과 램프의 수명 연장의 실효를 얻을 수 없다. 따라서 본 논문에서는 간략추론 방식의 지능이론(Fuzzy Inference System)을 전자식 안정기에 접목하여 지능형 Dimming Converter 기반 전자식 안정기에 대한 연구 및 외부조도 조건과 사용자 설정에 따른 에너지 절약을 도모하는데 중점을 두었다. 또한, 제안된 시스템의 하드웨어에 지능 모델을 적용함으로써 기존 전자식 안정기와 성능평가를 통해 제안된 지능형 Dimming Converter의 우수성을 보인다.

• 전기학회논문지
• /
• 제58권10호
• /
• pp.1947-1953
• /
• 2009

Metal halide (MH) lamps have been largely used due to high luminous efficiency, good color rendering, and long life. Since the metal halide lamps have problems of high ignition voltage and acoustic resonance. Thus, the design of ballast is very difficult for engineers. This paper proposes prototype of electric ballast in order to solve above two problems. The proposed electric ballast is consisted of EMI filter, full wave rectifier circuit, active PFC, DBI(Dual Buck Inverter), dimming circuit and ignitor circuit. The DBI supplies both rectangular voltage and current to the lamp. As the result of the experiment, the acoustic resonance was eliminated and the ignitor circuit was designed to generate high ignition voltage than 5kV. It makes the dimming circuit possible to control the lamp power in range between 230W and 350W.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1410-1412
• /
• 2005

A novel dimming algorithm for the electronic ballast of the electrodeless lamp is proposed. The proposed algorithm is based on the burst dimming method and controls the duty ratio for the two switches of the electronic ballast by pulse width modulated signal. The preposed algorithm was implemented by a fully digital circuit using EPLD device. To verify the validity of the proposed algorithm, the implemented control circuit was applied to the electronic ballast for a 100W electrodeless fluorescent lamp. As a result, the wide illumination dimming range from 5% to 100% was obtained.