• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.871-874
• /
• 2003

The T-5 Lamps developed in 1996 is the high efficiency fluorescent lamps, the lamps voltage is high, and the lamps current small because the lamps are slender tube of 16mm diameter. And so, the electrical characteristics of the Ballast for the lamps are different from of the Ballast for T-10 or T-8 lamps. Therefore, the know-how of the exclusive Ballast for the T-5 fluorescent lamps should be as soon as possible. We described the electrical and optical characteristics of the Electronic Ballast for T-5 Circular Fluorescent lamps. The developed Electronic dimming Ballast for T-5 Circular Fluorescent lamps has the 45% energy saving effects than the T-10 lamps. And it has the promotion of the THD less than 10%, CF less than 1.5%, Flickering less than 5% and 99% power factor. And it is available for two T-5 Circular fluorescent Lamps dimming, 22W and 40W.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.1
• /
• pp.47-52
• /
• 2005

This paper presents dimming control system for automotive 35W metal halide discharge(MHD) lamp electronic ballast. HID lamp demands a highly efficient ballast and very complex control circuitry that can control complex transient state in applying to automotive. Therefore, in this paper, a microcontroller-based digital control method for the HID lamp ballast is presented for optimal control that can adapt complex transient state, steady state and various environments. In developed dimming system, the system is designed to control the lamp output voltage step by step(continuous) using microcontroller according to CdS sensor. Therefore the designed dimming control system give good driving condition to diver and realize the power control effectively. The results of the proposed system is verified through various experiment results.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1998.11a
• /
• pp.156-161
• /
• 1998

The purpose of this paper is to determine circuit parameters in the inverter part of the electronic dimming ballast for fluorescent lamps, that is adequate to use with the prevailing dimming controller IC. Firstly, the operating frequency characteristics are investigated by varying circuit parameters of electronic ballasts and are matched with the output characteristics of dimming ballast controller. Secondly, circuit parameter values are determined by using PSpice simulation and operating frequency characteristics. Finally its validity is verified from the electrical and light output characteristics on the prototype of the electronic dimming ballast.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.2
• /
• pp.149-149
• /
• 1999

This paper is to present a selected method of circuit parameters in the inverter part of the electronic dimming ballast for fluorescent lamps, that is adequate to use with the prevailing dimming controller IC. Through the experiment result using the prototype of the electronic dimming ballast produced by this method, its validity is verified from the electrical and light output characteristics on fluorescent lamps. Also, it is feasible to remote automatic and passive control fur dimming electronic ballast as using a microprocessor, and we easily recognize the lamp condition owing to make a program indicate abnormal behavior for fluorescent lamp at PC screen.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.2
• /
• pp.17-23
• /
• 1999

This paper is to present a selected method of circuit parameters in the inverter part of the electronic dimming ballast fer fluorescent lamps, that is adffIuate to use with the prevailing dimming controller IC. Through the experirrent result using the prototype of the electronic dimming ballast rroduced by this rrethod, its validity is verified from the electrical and light outplt characteristics on fluorescent lamps. Also, it is feasible to rerrnte automatic and passive control for dimming electronic ballast as using a micrqrocessor, and we easily recognize the lamp condition owing to rmke a program indicate abnormal behavior for fluorescent lamp at PC screen.screen.

• Journal of Industrial Technology
• /
• v.29 no.B
• /
• pp.193-198
• /
• 2009

In this paper, we developed remote dimming control system of electronic ballast for 400W metal halide lamp. This ballast could limit ignition current and soft start-up technique by the inverter with LCsCp resonance tank. The dimming circuit can dim from 400W to 200W by varying of the inverter switching frequency. The PLM consists of coupling circuit, BPF(Band-Pass Filter), FSK(Frequency Shift Keying) Modem and ${\mu}$-controller(Micro Controller). By coupling electronic ballast with PLM, the system that able to dimming the lamp through PLM is demonstrated by experimental results.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.2085-2087
• /
• 1998

This paper presents the design method of a dimming electronic ballast for fluorescent lamps using a frequency control IC, and investigates the effects of circuit variables on its dimming characteristics. It is shown that effective dimming is possible with IC IR2151 for frequency control, and this leads to a feasible design of more smaller and cheaper dimming ballast. Five ballasts different in the values of the series inductance and capactance are designed, and their dimming characteristics are compared. As the result, the dimming range becomes more broader as the series inductance gets smaller and the capacitance larger. Thus appropriate selection of the values of L and C should be made according to the types of application site.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.4
• /
• pp.540-545
• /
• 2007

In this thesis, we introduce and investigate new architectures and comprehensive design methodologies of intelligent dimming converter and evaluate the proposed model and the system through a series of numeric experiments. Electronic ballast enable prolongation of life foy Fluorescent-Lamp and ballast. However, There are no merit in case that user impossible manual control. Therefore in this paper, we put emphasis on the design of electronic ballast based on intelligent dimming converter and the energy saving according to the day-light and the user settings by applying the intelligent model to a fluorescent lamp. Also, we show the superiority of the proposed Intelligent dimming converter through the evaluation of performance with conventional electronic ballast by applying the intelligent model to hardware of systems.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.10
• /
• pp.1947-1953
• /
• 2009

Metal halide (MH) lamps have been largely used due to high luminous efficiency, good color rendering, and long life. Since the metal halide lamps have problems of high ignition voltage and acoustic resonance. Thus, the design of ballast is very difficult for engineers. This paper proposes prototype of electric ballast in order to solve above two problems. The proposed electric ballast is consisted of EMI filter, full wave rectifier circuit, active PFC, DBI(Dual Buck Inverter), dimming circuit and ignitor circuit. The DBI supplies both rectangular voltage and current to the lamp. As the result of the experiment, the acoustic resonance was eliminated and the ignitor circuit was designed to generate high ignition voltage than 5kV. It makes the dimming circuit possible to control the lamp power in range between 230W and 350W.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1410-1412
• /
• 2005

A novel dimming algorithm for the electronic ballast of the electrodeless lamp is proposed. The proposed algorithm is based on the burst dimming method and controls the duty ratio for the two switches of the electronic ballast by pulse width modulated signal. The preposed algorithm was implemented by a fully digital circuit using EPLD device. To verify the validity of the proposed algorithm, the implemented control circuit was applied to the electronic ballast for a 100W electrodeless fluorescent lamp. As a result, the wide illumination dimming range from 5% to 100% was obtained.