• 한국항공운항학회지
• /
• 제13권3호
• /
• pp.9-21
• /
• 2005

The stable motion has been judged by mathematical modeling of the conditions that a rocket flies flexibly to take an active part in atmosphere. In this paper, the rocket conditions consist of the air speed, thrust and automatic attitude control. Aerodynamic force, a critical trust and a critical air speed are determined by comparing mathematical knowledges with eigenfrequencies of vibration equation. And then rocket object model is designed. Parameters and eigenfrequencies are used in dimensionless forms for in general applications by eliminating restrictions such as dimension, weight and select of materials.

• 한국연소학회지
• /
• 제9권1호
• /
• pp.32-38
• /
• 2004

Characteristics of turbulent lifted flames in coflow jet have been investigated by varying initial temperature through the heating coflow air. In the turbulent regime, liftoff height increases linearly with fuel jet velocity and decreases nonlinearly as the coflow temperature increases. This can be attributed to the increase of turbulent propagation speed, which is strongly related to laminar burning velocity. Dimensionless liftoff heights are correlated well with dimensionless jet velocity, which are scaled with parameters determining local flow velocity and turbulent propagation speed. This implies that the turbulent lifted flames are stabilized by balance mechanism between local turbulent burning velocity and flow velocity. Blowout velocity can be obtained from the ratio of mixing time to chemical time. Comparing to previous researches, thermal diffusivity should be evaluated from the initial temperature instead of adiabatic flame temperature.

• Korea-Australia Rheology Journal
• /
• 제17권4호
• /
• pp.149-156
• /
• 2005

A simple constitutive model for viscoelastic suspensions is discussed in this paper. The model can be used to predict the rheological properties (relative viscosity and all stresses) for viscoelastic suspensions in shear and elongational flow, and the constitutive equations combine a 'viscoelastic' behaviour component and a 'Newtonian' behaviour component. As expected, the model gives a prediction of positive first normal stress difference and negative second normal stress difference; the dimensionless first normal stress difference strongly depends on the shear rate and decreases with the volume fraction of solid phase, but the dimensionless second normal stress difference (in magnitude) is nearly independent of the shear rate and increases with the volume fraction. The relative viscosities and all the stresses have been tested against available experimental measurements.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제32회 추계학술대회 정기총회
• /
• pp.177-185
• /
• 2000

The characteristics of multi-leaf feil bearing are investigated. The Foil bearing is preloaded and has several leaf foils modeled by curved beams. An analysis of the air foil bearing was performed, considering effects of foil deflection and compressible lubrication equation simultaneously. A parametric study shows that the number of foils significantly affect the static characteristics of air foil bearings and describes what the minimum film thickness means. The results include pressure profile, load capacity, dimensionless torque and minimum film thickness in the foil bearing.

• 대한기계학회논문집A
• /
• 제20권8호
• /
• pp.2516-2523
• /
• 1996

The equations of motion for rotating contilever beams with a concentrated mass loated in an arbitrary position are derived. For the modeling of the concentrated mass the Dirac delta function is used for the mass density function. Parametric studies are performed with five dimensionless variables ; natural frequencies, angular velocity, hub radius, concentrated mass, and the mass location. The concentrated mass, whereverit may locate, lowers the natural frequencies of a stationaly beam. However, when the beam rotates, the natural frequencies(if they increase or decrease) are dictated by the location of the concentrated mass.

• 대한기계학회논문집B
• /
• 제29권4호
• /
• pp.441-452
• /
• 2005

The physical model considered here is a horizontal layer of fluid heated below and cold above with heat-generating conducting body placed at the center of the layer. The dimensionless thermal conductivities of body considered in the present study are 0.01, 1 and 150. The dimensionless temperature difference ratios considered are 0.25, 2.5 and 25. Two-dimensional solution for unsteady natural convection is obtained using an accurate and efficient Chebyshev spectral methodology for variety of Rayleigh number from $10^{3}\;to\;10^{6}.$ Multi-domain technique is used to handle square- shaped heat-generating conducting body. The results for the case of conducting body with heat generation are also compared to those without heat generation.

• 한국소음진동공학회논문집
• /
• 제17권6호
• /
• pp.498-506
• /
• 2007

Using wind tunnel, experimental approaches were employed to investigate fluidelastic instability of tube bundles, subjected to uniform cross flow. There are several flow-induced vibration excitation mechanisms, such as fluidelastic instability, periodic wake shedding resonance, turbulence-induced excitation and acoustic resonance, which could cause excessive vibration in shell-and tube heat exchanges. Fluidelastic is the most important vibration excitation mechanism for heat exchanger tube bundles subjected to cross flow. The system comprised of cantilevered flexible cylinder(s) and rigid cylinders of normal square array, In order to see the characteristics of flow in tube bundles, particle image velocimetry was used. From a practical design point of view, Fluidelastic instability may be expressed simply in terms of dimensionless flow velocity and dimensionless mass-damping. The threshold flow velocity for dynamic instability of cylinder rows is evaluated and the data for design guideline is proposed for the tube bundles of normal square array.

• 한국광학회지
• /
• 제33권1호
• /
• pp.35-44
• /
• 2022

광학계는 매우 다양한 용도로 사용되고 있기 때문에 유사한 구성의 광학계에서도 활용목적과 주어진 광학사양에 따라 다양한 설계가 존재한다. 하지만 광학수차는 광학계의 구조와 광학사양 모두에 영향을 받으므로 수차분석만으로는 광학설계의 고유한 특성을 파악하기 어렵다. 이 연구에서는 무차원의 설계변수를 사용하여 광학사양과 무관하게 광학설계의 수차특성을 파악하는 방법을 연구하고, 예시로서 서로 다른 용도와 사양을 가지는 4종의 triplet 설계를 분석하였다.

• Computers and Concrete
• /
• 제30권1호
• /
• pp.1-8
• /
• 2022

The basic purpose of the current study is to compute the numerical analysis of heat source/sink for Darcy-Forchheimer three dimensional nanofluid flow with gyrotactic microorganism by rotatable disk via porous media under the slip conditions. Due to nanoparticles, random and thermophoretic motion phenomenon occurs. The governing mathematical model is handled numerically by shooting method. Additionally, the characteristics of velocities, mass, heat, motile microorganisms and associated parameters are thoroughly analyzed via plots and tables. Different physical parameters like Forchheimer number, slip parameters like velocity, porosity parameter, Prandtl number, Brownian number, thermophoresis parameter, heat sink/source parameter, bioconvected Rayleigh number, buoyancy parameteron dimensionless velocities, temperature. Approximate values of Sherwood microorganism are analyzed.

• Advances in concrete construction
• /
• 제14권2호
• /
• pp.131-137
• /
• 2022

Based on the design of reinforced concrete columns in Chinese design codes, the failure function of reinforced concrete (RC) columns cannot be expressed as a linear function. This makes it difficult to reveal the level of reliability control in Chinese design code. Therefore, the failure function of dimensionless form is established in this paper, and the typical components (Industrial plant columns) are selected for analysis. At last, numerical simulation proves that the proposed model can be used to analysis reliability of columns. The results based on this model indicate that there is a strong difference in the reliability of RC columns designed with different design parameters, and the reliability would be lower when the eccentricity produced by crane load is smaller.