• Korean Chemical Engineering Research
• /
• v.54 no.6
• /
• pp.806-811
• /
• 2016

Organosolv pretreatment is the process to frationation of lignocellulosic feedstocks to enhancement of enzymatic hydrolysis. This process has advantages that organic solvents are always easy to recover by distillation and recycled for pretreatment. The chemical recovery in organosolv pretreatment can isolate lignin as a solid material and carbohydrates as fermentable sugars. For the economic considerations, using of low-molecular-weight alcohols such as ethanol and methanol have been favored. When acid catalysts are added in organic solvent, the rate of delignification could be increased. Mineral acids (hydrochloric acid, sulfuric acid, and phosphoric acid) are good catalysts to accelerate delignification and xylan degradation. In this study, the biomass was pretreated using 40~50 wt% ethanol at $170{\sim}180^{\circ}C$ during 20~60 min. As a results, the enzymatic digestibility of 2-stage pretreatment of rigida using 50 wt% ethanol at $180^{\circ}C$ was 40.6% but that of 1-stage pretreatment was 55.4% on same conditions, therefore it is shown that the pretreatment using mixture of the organosolv and catalyst was effective than using them separately.

• Journal of the Korean Chemical Society
• /
• v.38 no.8
• /
• pp.585-589
• /
• 1994

The complexation of cadmium(II) with a well characterized local soil fulvic acid was investigated at different solution pH and fulvic acid concentration using ion selective electrode. The stability constants were determined using a continuous distribution model based on Scatchard Plot; this model takes into consideration the diversitv of cation binding sites on a naturally occurring organic macromolecules even if the nature of the binding sites may not be known. The mean value of $logKi(\mu)$ was found to increase at higher pH(pH 4.0: ${\mu}=3.79{\pm}0.74$ l\;mol^{-1}; pH 6.0: ${\mu}=4.51{\pm}0.78$ l\;mol^{-1}$), and in more dilute fulvic acid concentration([FA] = 50 mgl$^{-1}: {\mu}=4.16{\pm}0.60$ l\;mol^{-1}; [FA]=151 mgl$^{-1}:{\mu}=3.75{\pm}0.5\;l\;mol^{-1}$). The intrinsic constant(logKint) for binding at the strongest site was measured to be around $4.72\;l\;mol^{-1}$ at both pH4.0 and 5.0, but was found to be increased to $6.03\;l\;mol^{-1}$ when pH was 6.0.

• Resources Recycling
• /
• v.31 no.2
• /
• pp.40-48
• /
• 2022

In this study, the effects of solution components were investigated in the recovery of vanadium as ammonium metavanadate from vanadium-ore-salt roasting-water leaching solution. The vanadium-containing solution is strongly alkaline (pH 13), so the pH must be lowered to 9 or less to increase the ammonium metavanadate precipitation efficiency. However, in the process of adjusting the solution pH using sulfuric acid, aluminum ions are co-precipitated, which must be removed first. In this study, aluminum was precipitated in the form of an aluminum-silicate compound using sodium silicate, and the conditions for minimizing vanadium loss in this process were investigated. After aluminum removal, the silicate was precipitated and removed by adjusting the solution pH to 9 or less using sulfuric acid. In this process, the concentration and addition rate of sulfuric acid have a significant influence on the loss of vanadium, and vanadium loss was minimized as much as possible by slowly adding dilute sulfuric acid. Ammonium metavanadate was precipitated using three equivalents of ammonium chloride at room temperature from the aluminum-free, aqueous solution of vanadium following the pH adjustment process. The recovery yield of vanadium in the form of ammonium metavanadate exceeded 81%. After washing the product, vanadium pentoxide with 98.6% purity was obtained following heat treatment at 550 ℃ for 2 hours.

• Applied Biological Chemistry
• /
• v.19 no.1
• /
• pp.1-23
• /
• 1976

The female moths of Lepidoptera comprising over 1,000,000 described species possess long-chain unsaturated alcohols or esters as the typical structure of potential sex attractants. In this experiment, various stereoisomers of $C_{16}-unsaturated$ acetates were synthesized for potential sex attractants; e.g., $CH_3(CH_2)_mCH=CH(CH_2)_nOR$ (m=0-12, n=1-13, R=H and $-COCH_3$). Seventeen acetates were spectrometrically examined so that the data would provide a ready catalog of gas chromatography and mass spectrometric data for comparison with natural insect sex attractants. Exclusively cis and trans isomers were obtained by the catalytic and chemical reduction methods, respectively. Commercially available $CH_3(CH_2)_mBr,\;CH_3(CH_2)_mC{\equiv}CH,\;HC{\equiv}C(CH_2)_nOH\;and\;HO(CH_2)_n\;OH$ were used for the synthetic starting material. 1-Alkynes, $CH_3(CH_2)_m\;C{\equiv}CH$ exceeding nine methylene groups did not condense with alkyl dihalides. The yield of coupling products was gradually decreased with increasing the molecular weight of diols. In the coupling reaction of $BrCH_2CH_2$ OTHP with acetylene gas, the tetrahydropyranyl ether of bromohydrin produced undesirable elimination product. In this experiment, it seems that p-toluenesulfonic acid is greatly favoured hydrolyzing agent over dilute sulfuric acid in the hydrolysis of the tetrahydropyranyl ether of long-chain alkynols.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.6
• /
• pp.459-468
• /
• 2011

The main purpose of this study was to examine the influence of treatment amounts of Slurry Composting and Biofiltration liquid fertilizer (SCBLF) on biomass growth of Yellow poplar (Liriodendron tulipifera) and to compare bioethanol production from the harvested wood. Relative growth rate, biomass production and leaf characteristics were significantly enhanced by SCBLF treatment and medium treatment plot showed highest value. Nitrogen compounds and water content in SCBLF affected to increase chlorophyll contents which led improving biomass production (64.67%) and glucose contents (6.07%) than control. Organosolv and dilute acid pretreatments were preliminarily carried for bioethanol production, and the pretreatment processes were conducted at all the same solid to liquid ratio (1 : 10), reaction temperature ($150^{\circ}C$), preheating time (40 min) and residence time (10 min). The water insoluble solid recovery of Organosolv pretreatment with 1% sulfuric acid as a catalyst was the lowest and that of medium treatment plot was 44.81%. Exchangeable cations in SCBLF might be affected to increase pretreatment effect. The simultaneous saccharification and fermentation process was followed to determine the ethanol production of the pretreated biomass. The highest ethanol production yield based on initial weight was obtained from high treatment plotby Organosolv pretreatment with 1% sulfuric acid (16.11%). But regarding biomass production, medium treatment plot produced most, and bioethanol production was increased by 72.93% than control.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.6
• /
• pp.81-95
• /
• 2006

In order to investigate the possibility of waste logs after oak mushroom production as a source of an alternative energy and to obtain the fundamental data of supercritical water hydrolysis that has been paid attention as a new saccharification method of lignocellulosics, supercritical water hydrolysis of normal log woods (Quercus acutissima Carruth) and waste logs was carried out. With the increase of reaction time and temperature, the color of the degradation products has been dark and the degradation rate and the crystalline index increased. However the increase of reaction pressure affected the color of the degradation products and the degradation rate at only low reaction temperature. In the early stage of the reaction, the degradation of hemicellulose was progressed, while in the late stage, the cellulose was degraded. The increase of reaction time and reaction temperature (less than $415^{\circ}C$) improved the sugar yield, while at high temperature(more than $415^{\circ}C$), the sugar yield was decreased. Based on the result of the sugar yield, the optimal hydrolysis condition of Q. acutissima Carruth by supercritical water was determined to be $415^{\circ}C$, 60 seconds and 230 pressure bar with the sugar yield of 2.68% (w/w). At the optimal condition, the supercritical water hydrolysis of waste logs after the mushroom production was carried out and the sugar yield was increased to 358% (w/w). The major degradation products of waste logs by supercritical water hydrolysis were 1,1'-oxybis-benzene and 1,2-benzendicarboxylic acid by the GC-MS analysis. At the reaction condition with low degradation rate, the fatty acids such as pentadecanoic acid, 14-methyl-heptadecanoic acid were identified. With the increase of the reaction temperature and time, the amounts of phenol and benzene were increased, but the reaction pressure did not affect the kinds of degradation products. Holocellulose content was 60.6~79.2% in the water insoluble residue and the monosaccharide yield of the water insoluble residue was 49.2~675% by the acid hydrolysis. The monosaccharide yield of water-soluble portion was increased largely by the second hydrolysis using dilute acid.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.3
• /
• pp.169-176
• /
• 2013

Objectives: The aim of this study is to critically review the health effects of not only direct exposure to biocide, but also indirect exposure to by-product hazardous agents generated through the use of biocide in metalworking operations. Methods: An extensive literature review was conducted of studies reporting on respiratory disease cases, particularly hypersensitivity pneumonitis (HP), in environments using water-soluble metalworking fluids (MWFs). Keyword search terms included 'metalworking fluids', 'machining fluids', 'metalworking operation' 'machining operation' and 'biocide', which were also used in combination. Additional articles were identified in references cited in the articles reviewed. Results: Several of the field, epidemiological and experimental studies reviewed assumed that the symptoms and signs typical of HP developed in machinists who handled water-soluble MWF could be caused by inhalation exposure to nontuberculous mycobacteria (NTM). Most NTM are known to be not only resistant to both biocide and disinfectant, but also to have acid-fast cell walls that are highly antigenic. The presence or persistence of the Mycobacterium species, referred to as NTM, in metalworking fluid-using operations may be caused by NTM contamination in either the natural water or tap water that is used to dilute the base oil and additives for water-soluble MWFs. This hypothesis that NTM contamination in water-soluble MWFs is a causative agent of HP has high biologic plausibility, such as antigenic property, hydrophobicity and small diameter (< 5 um). Conclusions: Aerosolized mycobacteria colonized from MWF are likely to be causing the HP. Inhalation exposure to mycobacteria should be considered as a possible cause for the development of HP.

• Resources Recycling
• /
• v.28 no.6
• /
• pp.18-25
• /
• 2019

In order to recover the cerium contained in the spent nickel metal hydride batteries (NiMH battery), the recovered rare earth complex precipitates from NIMH were converted into rare earth hydroxides through ion exchange reaction to react with NaOH aqueous solution at a reaction temperature of 70 ℃, for 4 hours. Rare earth hydroxides were oxidized by injecting air at 80 ℃ for 4 hours to oxidize Ce³⁺ to Ce⁴⁺. The oxidation rate of cerium was confirmed to be about 25 % through XPS, and the oxidized powder was separated from the rest of the rare earth using the difference in solubility in dilute sulfuric acid. The finally recovered powder has a crystal phase of cerium hydroxide (Ce(OH)₄). The cerium purity of the final product was about 94.6 %, and the recovery rate was 97.3 %.

• The Journal of Korean Medicine
• /
• v.27 no.4
• /
• pp.150-155
• /
• 2006

Object : This study investigated the quality inspection of Schizandra chinensis (Turcz.) Bail distributed in Korea. Methods: To evaluate the quality of these herbal medicines, we carried out TLC pattern analysis, purity, loss on drying, ash, acid-insoluble ash, essential oil contents, dilute ethanol-soluble, water-soluble, ether-soluble extracts and HPLC analysis. Results : As a result, TCL pattern analysis of schizandrin and gomisin A showed Rf=0.64 and 0.74, respectively. To measured content of schizandrin and gomisin A, we quantitatively analyzed using HPLC. The average contents of schizandrin and gomisin A were detected to be 0.60 (${\pm}$0.02)% and 0.12 (${\pm}$0.004)%, respectively. Discussion : As a result of this study, we suggest that the minimum content of schizandrin and gomisin A should be 0.5% and 0.1%, respectively. We could suggest that the minimum of essential oil content should be 0.6 ml.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.2
• /
• pp.11-24
• /
• 1998

All the surface activities including surface tension, foaming power, foam stability, emulsifying power, dispersion effect, and detergency were measured and critical micelle concentration(cmc) was evaluated in dilute aqueous solution. The cmc evaluated by the Ring method was $10^{-3}{\sim}10^{-4}mol/L$ in case of monoesters, and $10^{-3}{\sim}5.0{\times}10^{-5}mol/L$ in case of diesters, respectively. Surface tension of the aqueous solution was decreased to $45{\sim}50dyne/cm$, showing the tendency that the ability of lowering the surface tension was dependent on increasing of carbon atom number in alkyl chain. Foaming power of all the monoesters was better than that of diesters. while foam stability of diesters was to the contrary. Emulsifying power of soybean oil or benzene was specially expected to be good for emulsifiers in industrial application fields. HLB values of monoesters and diesters evaluated by Griffin's method were in the range of 8 to 12. Dispersion property of ferric oxide was stable in the range of $4.5{\times}10^{-5}{\sim}5.0{\times}^{-4}mol/L$ in case of monoesters, and $10^{-5}{\sim}10^{-4}mol/L$ in case of diesters.