• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.244.2-244.2
• /
• 2010

Biological conversion of biomass into fuels and chemicals requires hydrolysis of the polysaccharide into monomeric sugars. In this study, dilute sulfuric acid used as a catalyst for the pretreatment of rapeseed straw. Hydrolysis can be performed enzymatically, and with dilute or concentrate mineral acids. Dilute-acid hydrolysis of rapeseed straw was optimized through the utilization of combined severity. Evaluation criteria for optimization of the pretreatment conditions were based on high xylose recovery and low inhibitor contents in the hydrolyzates. In addition, this paper reports the compositional analysis of hydrolyzate liquors and solid residues, xylose and glucose mass balance closures, and digestibility results of the acid pretreated rapeseed straw.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.67-70
• /
• 2008

Biological conversion of biomass into fuels and chemicals requires hydrolysis of the polysaccharide fraction into monomeric sugars. Hydrolysis can be performed enzymatically, and with dilute or concentrate mineral acids. In this study, dilute sulfuric acid used as a catalyst for the hydrolysis of rapeseed straw. The purpose of this study is to optimize the hydrolysis process in a 15ml bomb tube reactor and investigate the effects of the acid concentration, temperature and reaction time on the hemicellulose removal and consequently on the production of sugars (xylose, glucose and arabinose) as well as on the formation of by-products (furfural, 5-hydroxymethylfurfural and acetic acid). Statistical analysis was based on a model composition corresponding to a $3^3$ orthogonal factorial design and employed the response surface methodology (RSM) to optimize the hydrolysis conditions, aiming to attain maximum xylose extraction from hemicellulose of rapeseed straw. The obtained optimum conditions were: acid concentration of 0.77%, temperature of $164^{\circ}C$ with a reaction time of 18min. Under these conditions, 75.94% of the total xylose was removed and the hydrolysate contained 0.65g $L^{-1}$ Glucose, 0.36g $L^{-1}$ Arabinose, 3.59g $L^{-1}$ Xylose, 0.51g $L^{-1}$ Furfural, 1.36g $L^{-1}$ Acetic acid, and 0.08g $L^{-1}$ 5-hydroxymethylfurfural.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.511-511
• /
• 2009

Lignocellulosic biomass is the most abundant organic material on earth and also promising raw material for bioenergy production. Agricultural residues in the process of bio-oil extraction, is an abundant and low-cost lignocellulosic material. The technology for conversion of lignocellulosic biomass resources to fuels and chemicals, such as ethanol, has been under development for decades. One of the well-studied technologies that are currently being commercialized is to use a dilute acid-catalyzed pretreatment followed by enzymatic hydrolysis and fermentation to produce ethanol. In this work, the dilute-acid hydrolysis of agricultural residues was optimized through the utilization of statistical experimental design. Evaluation criteria for optimization of the pretreatment conditions were based on high xylose recovery and low inhibitor contents in the hydrolyzates. The purpose of this study was to gain a more accurate understanding of the quantities of acid required for effective hydrolysis and the reactivity trade-offs with reaction time and temperature that will enable overall process optimization.

• Journal of the Korean institute of surface engineering
• /
• v.53 no.3
• /
• pp.87-94
• /
• 2020

Herein, sulfonated carbon nanotubes (CNT) have been prepared in dilute sulfuric acid (H₂SO₄) via a novel sulfonation approach based on gas-liquid interfacial plasma (GLIP) at room temperature. The sulfonic acid groups and total acid groups densities of CNT after GLIP treatment in 2 M H₂SO₄ for 45 min can reach to 0.53 mmol/g and 3.64 mmol/g, which is higher than that of sulfonated CNT prepared under 0.5 M / 1 M H₂SO₄. The plasma sulfonated CNT has been applied as catalysts for the conversion of microcrystalline cellulose to glucose. The effect of hydrolysis temperature and hydrolysis time on the conversion rate and product distribution have been discussed. It demonstrates that the total conversion rate of cellulose increasing with hydrolysis temperature and hydrolysis time. Furthermore, the GLIP sulfonated CNT prepared in 2 M H₂SO₄ for 45 min has shown high catalytic stability of 85.73 % after three cycle use.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.2
• /
• pp.123-132
• /
• 2012

Pre-pulping extracts were found to contain a dilute amount of xylo-oligosaccharides and acetic acid as the major components, and many minor components including other organic acids, lignin-derived phenolics, and sugar degradation products. Once separated from the pulp, a secondary hydrolysis step was required to hydrolyze oligomeric hemicellulose sugars into monomeric sugars before fermentation. The following study detailed the extent of hemicellulose recovery by pre-pulping using hot water extraction and characterized the hydrolysis of the extract with respect to comparing acid and enzymatic hydrolysis. The secondaryhydrolysis of hot water extracts made at an H-Factor of 800 was tested for a variety of acid and enzyme loading levels using the sulfuric acid and xylanases. The maximum fermentable sugar yield from acid and enzyme hydrolysis of the extract was 18.7 g/${\ell}$ and 17.7 g/${\ell}$ representing 84.6% and 80.1% of the maximum possible yield, respectively.

• KSBB Journal
• /
• v.13 no.3
• /
• pp.312-319
• /
• 1998

The dilute-acid pretreatment/hydrolysis of hemicellulose in oak wood using a percolation reactor was investigated. The experimental conditions ranged 160∼180$^{\circ}C$ and 0.05∼0.2 wt.% sulfuric acid. XMG(xylan+mannan+galactan) recovery was higher when sulfuric acid was used as leaching solvent than water. Also it was important for high XMG recovery to keep leaching temperature higher after reaction. XMG recovery was decreased as the size of wood chips was increased. At an optimum condition (reaction condition= 170$^{\circ}C$, 0.1% sulfuric acid, 1ml/min, 10min, leaching condition=0.1% sulfuric acid, 2mL/min, 20 min), the product yield and the sugar concentration were about 92% and 2.7%, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.2
• /
• pp.187-195
• /
• 2011

In this study, dilute acid pretreatment of $Liriodendron$ $tulipifera$ was performed for enzymatic hydrolysis. As the pretreatment temperature was increased, enzymatic hydrolysis and enzyme adsorption yield also increased. The highest enzymatic hydrolysis yield was 57% (g/g) and enzyme adsorption was 44% (g/g). Enzymatic hydrolysis yield was determined with weight loss of pretreated biomass by enzyme, and enzyme adsorption was a percentage of enzyme weight attaching on pretreated biomass compared with input enzyme weight. When $L.$ $tulipifera$ was pretreated with 1% sulfuric acid at $160^{\circ}C$ for 5 min., hemicellulose was significantly removed in pretreatment, but the lignin contents were constant. Other changes in surface morphology were detected on biomass pretreated at $160^{\circ}C$ by a field emission scanning electron microscope (FESEM). A large number of spherical shapes known as lignin droplets were observed over the entire biomass surface after pretreatment. Hemicellulose removal and morphological changes improved enzyme accessibility to cellulose by increasing cellulose exposure to enzyme. It is thus evidence that enzyme adsorption is a significant factor to understand pretreatment effectiveness.

• Archives of Pharmacal Research
• /
• v.16 no.4
• /
• pp.322-326
• /
• 1993

For the development of new antinflammatory and analgesic drugs, new 5-alkylthio (or sulfonyl) methyl-5-m-methoxyphenylhydantoin-3-acetic acid derivatives(alkyl; ethyl, propyl, butyl) were prepared. The 5,5 -disubstituted hydantoins which were used as starting materials, were prepared acording to Bucherer-Berg method. The reaction of ethyl chloroacelate with these compounds gave 3-acetate and the subsequent hydrolysis with dilute sodium hydroxide resulted in hydantoin 3-acetate and the subsequent hydrolysis with dilute sodium hydroxide resulted in hydantoin 3-acetic acid derivatives. Through the same procedure of equivalent hydroxide resulted in hydantoin 3-acetic acid derivatives. Through the same procedure of equivelent hydantions or the oxidation of 5-alkylthiohydantoin ocmpounds described above, 5-alkylsulfonylme-thyl-5-m-methoxyphenylhydantoin-30acetic acid derivatives were also synthesized.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.2
• /
• pp.232-242
• /
• 2017

The objective of this study was to examine changes in the porosity and internal structure of wood as it goes through the process of saccharification (extraction of fermentable sugars). This study also examined the use of different drying methods to prepare samples for characterization of internal pores, with particular emphasis on the partially disrupted cell wall. Aspen wood flour samples after dilute acid pretreatment followed by enzymatic hydrolysis were examined for nitrogen adsorption. The resulting isotherms were analyzed for surface area, pore size distribution, and total pore volume. Results showed that freeze drying (with sample pre-freezing) maintains the cell wall structure, allowing for examination of saccharification effects. Acid pretreatment (hemicellulose removal) doubled the surface area and tripled the total volume of pores, which were mostly 10-20 nm wide. Subsequent enzymatic hydrolysis (cellulose removal) caused a 5-fold increase in the surface area and a ~ 11-fold increase in the total volume of pores, which ranged from 5 to 100 nm in width. These results indicate that nitrogen adsorption analysis is a feasible technique to examine the internal pore structure of lignocellulosic residues after saccharification. The information on the pore structure will be useful when considering value-adding options for utilizing the solid waste for biofuel production.

• 한국생물공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.660-660
• /
• 2003