• 한국식품영양학회지
• /
• 제12권2호
• /
• pp.204-208
• /
• 1999

In order to obtain data for use of algin in drink making process solution properties of algin have been investigated at various condition of algin concentration temperature pH and various food additives. At same revolution velosity viscosities of algin were increased as algin concentration raised. Algin solution showed dilatnat type flow in concentration of 0.25% to 0.4% but pseudoplastic type flow in above 0.5% showed dilatant type flow in concentration of 0.25% to 0.4% but pseudoplastic type folw in above 0.5% A maximum viscosity of algin was observed at pH 5.5 and its viscosities were also decreased as the tem-perature increased and heating at 8$0^{\circ}C$ above. Organic acids affected on the viscosity of algin with pH dependently and gel formed in pH below 3.0 Sweetners have no effect to the viscosity of algin. How-ever addition of NaCl and KCL upto 1.0% decreased a little its viscosity and CACl2 MgCl2 and FeCl3 increased the viscosity of algin Glutamic acid decreased the viscosity of algin.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1996년도 추계학술대회논문집
• /
• pp.20-28
• /
• 1996

An Eulerian finite element method for the analysis of steady state rolling/extrusion of sintered powder metals is presented. Initial guess of the porosity distribution in an Eulerian mesh is obtained from the velocity and scaled pressure field computed by the Consistent Penalty finite element formulations-the standard one and the consistent penalty type one-are invoked for the analysis of strain hardening, dilatant viscoplastic deformation of porous metals. Comparisons of the predicted distributions of porosity to those by a Lagrangian finite element method and by experiments reported in the articles prove the effectiveness and validity of the proposed method.

• 한국농공학회논문집
• /
• 제48권4호
• /
• pp.67-74
• /
• 2006

This study was carried out to investigate the liquefaction behaviour of saturated silty sand under monotonic loading conditions. The undrained soil tests were conducted using a modified triaxial cell and specimens were prepared using the moisture tamping method. Undrained triaxial compression tests were performed at different confining pressures, void ratios and overconsolidation ratios and the samples were sheared to axial strains of about 20% to obtain monotonic loading conditions. It is shown that increasing confining pressures, void ratios and overconsoildation ratios increases the deviator stress, but it has no effect on increasing the dilatant tendencies. It is shown that complete static liquefaction was observed regardless of increases in the confining pressure, void ratio and overconsolidation ratio. Therefore, the confining pressure, void ratio and overconsoildation ratio does not provide significant effects on the liquefaction resistance of the silty sand. The presence of fines in the soil was shown to greatly increase the potential for static liquefaction and creates a particle structure with high compressibility for all cases.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.483-490
• /
• 2002

This paper presents the results of a comparative study between FEM and LEM on slope stability analysis. For validation, factors of safety were compared between FEM and LEM. The results from the two methods were in good agreement suggesting that the FEM with the shear strength reduction method can be effectively used on slope stability analyses. A series of analysis were then performed using the FEM for various constitutive laws, slope angles, flow rules, and the finite element discretizations. Among the findings, the finite element method in conjunction with the shear strength reduction method can provide reasonable results in terms of factor of safety. Also revealed is that the results of FEM can be significantly affected by the way in which the type of constitutive law and flow rule are selected.

• Structural Engineering and Mechanics
• /
• 제10권2호
• /
• pp.181-195
• /
• 2000

A two-step procedure for the application of non linear constrained programming to the limit analysis of rigid brick-block systems with no-tension and frictional interface is implemented and applied to various masonry structures. In the first step, a linear problem of programming, obtained by applying the upper bound theorem of limit analysis to systems of blocks interacting through no-tension and dilatant interfaces, is solved. The solution of this linear program is then employed as initial guess for a non linear and non convex problem of programming, obtained applying both the 'mechanism' and the 'equilibrium' approaches to the same block system with no-tension and frictional interfaces. The optimiser used is based on the sequential quadratic programming. The gradients of the constraints required are provided directly in symbolic form. In this way the program easily converges to the optimal solution even for systems with many degrees of freedom. Various numerical analyses showed that the procedure allows a reliable investigation of the ultimate behaviour of jointed structures, such as stone masonry structures, under statical load conditions.

• 한국식품과학회지
• /
• 제18권2호
• /
• pp.114-117
• /
• 1986

칡 전분현탄액$(2{\sim}6%)$의 리올로지 특성을 $30^{\circ}{\sim}65^{\circ}C$의 온도 범위에서 모세관 점도계를 이용하여 조사하였다. 4%농도의 경우 $65^{\circ}C$에서 의가소성 유체의 거동을보였다. 점조도지수 값은 전분 농도의 중가에 따라 지수 함수적으로 증가하였다. 온도 $30^{\circ}{\sim}60^{\circ}C$ 의 경우 전분현탄액의 유동의 활성화에너지는 $0.307{\sim}0.399kcal/mole$이었으나, $60^{\circ}{\sim}65^{\circ}C$의 경우에는 약 $28{\sim}60kcal/mole$이었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1987년도 학술발표회 발표강연집
• /
• pp.51-80
• /
• 1987

In this studys a numerical analysis on the defomation of foundation layer was carried out by indroducing joint element. The method using the joust element between adj assent different materials has been originally developed for rock behavior(Goodman, et al. 1968) . The application of this method to the interface between the footing and soil layer proved satisfactory(Ghaboussi p et at. 1973). Authors tried to obtain the deformation of rrcompound foundation layerg", which vertically or horizontally or both consists of the natural(or intact) soft clay layer and the layer improved artificially in order to get high stiff-fness with replacement or chemical treatment to reduce the excessively detrimental settlemellt or lateral displacement in case of banking or building the civil structure on the soft layer. The joint conditions were classified into three categories : contacts sliding and separation. By coupling "JOINT" as a subroutine into multi-purpose code for the finite element method of the foundatlion daveloped by authors on the assumption that shearing and normal displacement can not be coupledl which terms pinon-dilatant" and by selecting modified Cam-clay modeIP the deformation analysis was performmed. The results using joint element were compared with those secured without introduction of joint element Nain results analized are as follows : 1. For the prediction of settlement and lateral desplacement, the result due to joint element was evaluated larger, which was regarded safe. 2. For the determination of ultimate bearing capacetyi the value using joint element appeared smaller by 20%, which was also safe.

• 대한토목학회논문집
• /
• 제13권5호
• /
• pp.255-260
• /
• 1993

본 연구에서는 실트흙의 거동을 자동화된 삼축시험기를 사용하여 비배수 상태하에서 정적 삼축압축과 인장시험을 수행하여 파괴전과 파괴상태시 체적변형 경향으로 인한 응력 변형률 상태를 점토질흙과 비교 검토하였다. 점토질흙의 거동과 비교하기 위하여 순수 실트인 실리카 분말을 사용하여 성형된 시료를 450 kPa인 유효구속 압력까지 등방압밀시킨 후 압밀하중을 감소시키며 과압밀비(OCR)가 다른 시료를 만들어 전단시험을 하였다. 해석 결과 정규압밀 실트의 비배수 강도는 점토와 달리 전단하에서 체적팽창으로 계속 증가하며 과압밀 실트(OCR>2)에 있어서도 체적변형 경향으로 상당히 다른 거동을 보임을 알 수 있었다.

• 한국지반공학회논문집
• /
• 제19권4호
• /
• pp.65-74
• /
• 2003

본 논문에서는 사면안정해석에 있어서의 유한요소법과 한계평형법의 결과를 나타내었다 해석의 타당성을 부여하기 위하여 유한요소법과 한계평형법에 의한 안전율을 비교하였으며, 각각의 방법에 의한 안전율이 잘 일치됨을 보여 전단강도감소기법을 사용한 유한요소해석이 사면안정해석에 있어서 효과적으로 사용될 수 있음을 확인하였다. 구성 법칙, 사면의 경사각, 흐름법칙, 그리고 유한요소망의 이산화에 따른 일련의 유한요소해석을 실시한 결과, 전단강도감소기법에 근거한 유한요소해석법은 안전율에 관하여 합리적인 결과를 제공할 수 있음을 확인하였고 유한요소해석결과는 구성법칙과 흐름법칙의 선택에 의해 상당한 영향을 받을 수 있음을 알 수 있다.

• 한국지반공학회지:지반
• /
• 제9권4호
• /
• pp.27-36
• /
• 1993

본 연구에서는 실트흙의 거동에 대하여 자동화된 삼축시험기를 사용하여 정하중(monotonic loading)과 반복 동하중(cyclic loading)하에서 파괴전과 파괴상태시 응력 변형률 상태를 제시하였다. 시료성형을 위하여 순수 실트인 실리카 분말을 사용했으며 시료는 조밀한 경우(D,=80%, eo=0.68)와 느슨한 경우(D,=35pl, eo=0.9)의 2종류로 만들어 등방 압밀후 배수. 비배수 상태하 에서 삼축압축과 인장시험을,비배수 상태하에서 반복 동하중 시험을 하였다. 해석 결과 전반적인 실트의 거동은 사질토와 비슷하지만 점토질흙에 비해서는 체적팽창(dilatancy)으로 인하여 정하중과 반복동하중하에서 상당히 다른 거동을 보임을 알 수 있었다.