• 해양환경안전학회지
• /
• 제17권4호
• /
• pp.307-314
• /
• 2011

본 연구는 무인 항공사진 촬영을 이용하여 해안에 산재한 해안표착물을 탐지하는 새로운 방법을 제시하였다. 이동성과 신속성, 경제성이 우수한 소형 무선 조정 헬리콥터의 기체와 헬리콥터의 진동에 관계없이 연직 상태를 유지할 수 있는 짐벌 장치에 디지털카메라를 장착하여 항공사진 촬영을 시행하였다. 또한, 촬영된 영상으로부터 해안표착물을 탐지하기 위해 Matlab program을 이용한 디지털 영상처리 알고리즘을 고안하였다. 특히 고안된 알고리즘은 배경 차감 기법(Background subtraction method)을 적용하여 연구 대상 해안의 각기 다른 모래 상태로 인해 발생하는 물체 추출 오차를 감소시킴으로써 다양한 형태의 해안표착물을 안정적으로 탐지하는 결과를 보여주었다. 향후, 이 연구 방법을 적용한 해안표착물 모니터링이 이루어질 경우 모니터링 대상 구역 설정의 대표성 문제 해결 및 발생량 추정에 크게 기여할 수 있으며, 해양환경 감시 분야에 활용가능성이 클 것으로 판단된다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.201-205
• /
• 2007

In the post-Cold War era, acquisition technique of high-resolution satellite imagery (HRSI) has begun to commercialize. IKONOS-2 satellite imaging data is supplied for the first time in the 21st century. Many researchers testified mapping possibility of the HRSI data instead of aerial photography. It is easy to renew and automate a topographical map because HRSI not only can be more taken widely and periodically than aerial photography, but also can be directly supplied as digital image. In this study matching size of IKONOS Geo-level stereo image is presented lot production of digital elevation model (DEM). We applied area based matching method using correlation coefficient of pixel brightness value between the two images. After matching line (where "matching line" implies straight line that is approximated to complex non-linear epipolar geometry) is established by exterior orientation parameters (EOPs) to minimize search area, the matching is tarried out based on this line. The experiment on matching size is performed according to land cover property, which is divided off into four areas (water, urban land, forest land and agricultural land). In each of the test areas, window size for the highest correlation coefficient is selected as propel size for matching. As the results of experiment, the proper size was selected as $123{\times}123$ pixels window, $13{\times}13$ pixels window, $129{\times}129$ pixels window and $81{\times}81$ pixels window in the water area, urban land, forest land and agricultural land, respectively. Of course, determination of the matching size by the correlation coefficient may be not absolute appraisal method. Optimum matching size using the geometric accuracy therefore, will be presented by the further work.

• 대한영양사협회학술지
• /
• 제18권2호
• /
• pp.115-125
• /
• 2012

This study was conducted to investigate the effects of food consumption monitoring using a camera-phone in a weight control program. Twenty-six female college students (>30% body fat) were randomly assigned to the camera-phone and diary (CD) group or diary (D) only group. During the 8-week weight control program, the CD group controlled their food consumption using a camera-phone, in which they took a food picture and uploaded it to the homepage. However, the D group used only a diary to record their food intake. The mean energy intake of the CD group during the program was 1451.9 kcal while that of the D group was 1524.3 kcal. The total energy intakes of both groups significantly decreased during the program. The CD group lost 5.2 kg of body weight and 3.1% body fat while the D group lost 2.2 kg of body weight and 1.1% body fat. The body weight and fat levels significantly decreased in the CD group compared to the D group. The triglyceride, total-cholesterol and LDL-cholesterol levels of the CD group as well as the total-cholesterol level of the D group significantly decreased during the program. The total-cholesterol and LDL-cholesterol levels both significantly decreased in the CD group compared to the D group. In this study, it was concluded that digital photography method using a camera-phone might influence weight control through trained consumption monitoring, which helps individuals reduce discrepancies between perceived and actual consumption levels.

• 비파괴검사학회지
• /
• 제6권2호
• /
• pp.37-45
• /
• 1987

Speckle photography is a very useful method for measuring in-plane surface displacement. In its basic form, the object to be studied is illuminated with a divergent laser beam, and a double exposure photograph of the object is recorded, on a fine-grain film or plate, before and after the object is deformed, The magnitude and the direction of the displacement can then be obtained by measuring the spacing and the direction of the Young's fringe, which is produced by probing the developed negative with an unexpaned laser beam, and consists of a pattern of parallel equi-spaced dark bands. In this paper, a hybrid optical and electronic image processing is described-Young's fringe on the viewing screen is observed by a TV-camera and the 2-D video signal is converted from analog to digital and transfered to the computer where the spacing and direction of the fringes are calculated. Several examples of application show that the displacement magnitude and direction can be determined with an accuracy of $0.1{\mu}m\;and\;0.1^{\circ}$ respectively.

• 복식문화연구
• /
• 제15권3호
• /
• pp.383-393
• /
• 2007

The purpose of this study is to examine the expressional characteristics of T-shirts design using digital printing. Through digital printing system, a variety of patterns and pictures can be printed on T-shirts in a relatively short time. At this backdrop, the result of this research can aid to develop design of T-shirts with a high value added on it. The result was that the printing methods were categorized into borrowing the pictures of masterpieces, applying photography or caricatures, introducing graffiti or lettering, and representing industrial arts. In conclusion, digital printing system unlike the established printing method can have almost an unlimited range of expressing various kinds of pictures and patterns, so that designers may develop high value-added differentiated T-shirts. In other words, by creating a variety of designs with no limit of its quantity, its expressive range can be more widened and with an increased development of plotting machines, we may manufacture more varied kinds of products in a small quantity at a faster rate.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권11호
• /
• pp.2160-2174
• /
• 2011

In this paper, a new technique for color reproduction based on color variation characteristics of digital camera under a dim light condition is proposed. Generally, photographers should adjust a camera exposure properly for obtaining an image with real color tone of subjects. Thus, in case of taking a picture under a dim light condition, the exposure time of a camera has to be relatively longer than the one under a bright light condition. Although images with real color tone of the subject are obtained, the images may get blurred due to the shaky hands of photographer holding the camera. In order to avoid the blur effect, an input image is captured from a camera set as a short exposure time under a dim light condition. Then we propose a method to reproduce color tone of the dim input image. To this end, color variation characteristics which represent color variations of a digital camera are first extracted by analyzing the Macbeth color checker images taken under various exposure values. Then, a color reproduction is performed by an estimation based on the color variation characteristics. Experimental results have shown that the proposed method has achieved better performance of color reproduction, compared with existing methods.

• 한국측량학회지
• /
• 제13권1호
• /
• pp.49-59
• /
• 1995

본 연구는 농업용수 개발사업의 기초조사와 기본계획 및 실시설계 과정에 수치지형정보를 활용함으로써 농업용수 개발사업의 경제적이고 합리적인 추진에 기여함을 목적으로 한다. 본 연구에서는 대상지역의 수치지형정보를 취득하기 위해 항공사진을 이용하였으며, 이를 보간하여 대상계획에 적합한 수치표고모형을 생성함은 물론, 관련도형정보 및 속성자료를 이용하여 농업용수 개발사업의 기초조사용 데이터 베이스를 설계하였다 본 연구의 수행결과, 본 연구에서 정 저한 방법이 농업용수 개발사업의 효율적 인 수행에 기여함을 알 수 있었다.

• Imaging Science in Dentistry
• /
• 제53권3호
• /
• pp.209-216
• /
• 2023

Purpose: This study was conducted to compare dental plaque scores obtained through clinical examinations and various imaging techniques, as well as to assess the effectiveness of herbal and conventional toothpastes for plaque removal. Materials and Methods: Thirty volunteers were divided into 3 groups. Each group was given a different toothpaste (from 2 herbal toothpastes and a conventional toothpaste) with which to brush their teeth for 21 days. Both initially and after brushing, dental plaque samples were collected, and plaque on the buccal surfaces of anterior teeth was scored using several imaging systems after staining with a disclosing agent. Specifically, digital dental photography, intraoral digital scanning, and FluoreCam imaging were employed to capture intraoral images. The Turesky Modified Quigley-Hein Plaque Index was used for clinical examination and image analysis. Quantitative polymerase chain reaction analyses and correlational assessments between clinical examination and imaging scores were conducted before and after toothpaste use. The Shapiro-Wilk test and Pearson correlations were utilized. Results: The lowest mean value was observed in the clinical examination without staining, while the highest was obtained using the FluoreCam method. No significant change was found in the level of any microorganism assessed following toothpaste use (P<0.05), with the exception of a decrease in S. mutans levels after using conventional toothpaste (P<0.05). Conclusion: Herbal toothpaste demonstrated plaque-removal effectiveness comparable to that of conventional toothpaste. The use of imaging methods for measuring plaque index has been suggested as a means to educate patients about plaque control and promote ongoing oral care.

• 한국인쇄학회지
• /
• 제31권1호
• /
• pp.51-64
• /
• 2013

When it comes to current growth trend for the printing process in Asia printing market, offset printing, gravure printing and screen printing are reduced respectively -4%, -19%, -55%. In judging from the fact, the change in the printing production system from mass production on small amount to small production on mass amount is the biggest issue. For this reason, digital printing shows the significant growth. According to the increase of the growth 78% for electro photography way and 67% for ink-jet, it's not enough to catch up with digital printing which is increasing as time goes by to equip with hardware like as digital press. There's been necessary to install the BOD(Book on Demand) system which is the advanced and regular publication edit solution based on web-to-print model in the prepress, and it has made the BOD system be considered in relation to maximization of efficiency and production. Therefore, this research tries to step forward from the POD concept, which is refired to "Print along with the ordered quantities, the ordered appropriate time and the demanded place", so that it could expand the range of the printing/publishing environment using the BOD system, the order-made publication based on automatically operating template. And it tried to make the relation to digital web press on ink-jet method which is adequate to "mass production on small amount" with such advanced concept. This research also aims to use actively BOD solution model to promote the productivity of labor, and then to produce the printings across all related industries, which means to manufacture maximally the products on the shortest time at minimum place through PC equipments.

• 한국컴퓨터그래픽스학회논문지
• /
• 제14권3호
• /
• pp.1-9
• /
• 2008

본 논문에서는 전통적인 사진 기법에 기반하여 대비가 뚜렷한 흑백 영상을 얻기 위한 새로운 방법을 제안한다. 사진가들은 대비가 뚜렷한 흑백 사진을 얻기 위해 촬영 시 대비 필터(consrast filter)를 사용하여 특정 색이 부각된 흑백 필름을 얻고, 인화 시 버닝(burning)과 닷징(dodging) 같이 국지적 노출을 조절하는 기법을 사용하였다. 본 논문에서는 이러한 흑백 사진 기법에 대한 디지털 버전을 제안하고 이에 기반하여 영상의 시각적 특징을 최대한 유지하는 최적화 기법을 제안한다. 또한, 인접 픽셀간의 유사 가중치를 이용하여 경계를 감안한 연속적인 국지적 노출을 얻게 한다. 제안한 기법은 GPU상에서 구현 가능하며 메가픽셀 영상에 대해서도 시각적 특징을 유지하는 흑백 영상을 대화적 시간 안에 획득할 수 있다.