• Journal of Advanced Navigation Technology
• /
• v.27 no.1
• /
• pp.57-62
• /
• 2023

This paper proposes a tri-band bandpass filter using dual-mode stepped-impedance resonators (SIRs) with parallel coupled structures. The proposed filter adopts U-shaped SIRs with open stubs and parallel coupled lines (PCLs) that have inter-digital and comb-line shorted ends. Two U-shaped SIRs with open stubs build the first and third passband, and the central PCL resonators build the second passband. Five resonators and coupling structures are theoretically analyzed to derive the scattering parameters of the proposed filter. A novel tri-band bandpass filter is designed and fabricated using the induced scattering parameters. The measured result of the fabricated tri-band bandpass filter shows a good agreement with the simulated one.

• Journal of Digital Convergence
• /
• v.20 no.3
• /
• pp.389-397
• /
• 2022

As increasing the growth of the Internet in medical area, a new technology to transmit effectively massive medical data is required. In optical internet, all OBS nodes have fiber delay lines, hardware components. These components are calculated under some optimal traffic conditions, and this means that if the conditions change, then the components should be altered. Therefore, in this article a new service differentiation algorithm using the previously installed components is proposed, which is used although the conditions vary. When traffic conditions change, the algorithm dynamically recalculates the threshold value used to decide the length of data bursts. By doing so, irrelevant to changes, the algorithm can maintain the service differentiation between classes without replacing any fiber delay lines. With the algorithm, loss sensitive medical data can be transferred well.

• Convergence Security Journal
• /
• v.23 no.5
• /
• pp.3-8
• /
• 2023

The Fourth Industrial Revolution is bringing about great changes in many industrial fields, and among them, active research is being conducted on convergence technology using artificial intelligence. Among them, the demand is increasing day by day in the field of object recognition using artificial intelligence and digital transformation using recognition results. In this paper, we proposed an optimal learning model construction method to accurately recognize letters, symbols, and lines in images and save the recognition results as files in a standardized format so that they can be used in simulations. In order to recognize letters, symbols, and lines in images, the characteristics of each recognition target were analyzed and the optimal recognition technique was selected. Next, a method to build an optimal learning model was proposed to improve the recognition rate for each recognition target. The recognition results were confirmed by setting different order and weights for character, symbol, and line recognition, and a plan for recognition post-processing was also prepared. The final recognition results were saved in a standardized format that can be used for various processing such as simulation. The excellent performance of building the optimal learning model proposed in this paper was confirmed through experiments.

• Journal of Fashion Business
• /
• v.18 no.6
• /
• pp.57-66
• /
• 2014

The purpose of this study is to design appropriate digital tools for the production of makeup designs. In this study, we used a three-dimensional facial avatar simulation program developed by the Electronics and Telecommunications Research. This study is based on the creation of three-dimensional CG digital art of facial avatar makeup, produced by using simulation technology. First, the actual application and the tools for digital-optimization and media features were created, leading to the research and cleanup. Second, the theoretical background was applied to the formative elements of oriental colors in the designing process. Makeup design elements include point, line, surface, color, and texture. In this study, effective makeup design was interpreted to be based on the representation of particular elements, notably the design principles of balance, proportion, rhythm, repetition, emphasis, contrast, harmony, and unity. In Asia, design is based on the visibility of red, blue, black, yellow, and white-the colors of the five elements-and the use of points, lines, and shapes. This study was recently under scrutiny in relations to digital simulation and various three-dimensional designs, in terms of how to take advantage of a wide range of applications, and how to apply the findings through media and the dissemination of basic research. This study applies the characteristics of the limited existing stereoscopic three-dimensional and digital simulation programs in order to take advantage of the empirical research, providing a basis to implement this research in a meaningful way. A follow-up study is needed to extend these findings and theoretical foundation through continuous observation and in-depth technical development and research.

• Journal of Korea Multimedia Society
• /
• v.6 no.5
• /
• pp.861-869
• /
• 2003

The rapid growth of multimedia network systems has caused overflowing illegal copies of digital contents. Among digital contents, watermarking technique can be used to protect ownership about the image. Copyright protection involves the authentication of image ownership and the identification of illegal copies of image. In this paper, a new digital watermarking technique using HVS and adaptive scale factor based on the wavelet transform is proposed to use the binary image watermark. The original image is decomposed by 3-level wavelet transform. It is embedded to baseband and high frequency band. The embedding in the baseband is considered robustness, the embedding in the high frequency band is concerned about HVS and invisibility. The watermarking of a visually recognizable binary image used the HVS and random permutation to protect the copyright. From the experimental results, we confirm that the proposed technique is strong to various attacks such as joint photographic experts ground(JPEG) compression, cropping, collusion, and inversion of lines.

• Journal of Digital Convergence
• /
• v.19 no.12
• /
• pp.457-462
• /
• 2021

As South Korea is a mountainous topography, installation of tunnel is essential for construction of expressway in straight lines. According to "2019 Road Bridge and Tunnel Status Report", there are 2,682 tunnels in Korea with total length of 2,077km. Tunnels take up 1.9% of total road length and the number of tunnel increased by 94% with 1,300 newly constructed tunnels over the 10 years. According to domestic and foreign researches, a long tunnel over 1km in expressway has dark lightings and monotonous wall design which decrease driver's concentration and make the driver feel bored. This leads to feeling fatigue and drowsiness more easily. In response, Korea Expressway Corporation installed design lighting that increases attentiveness on 10 tunnels with total length over 3km by 2020. To reduce the risks of accident that may happen inside the tunnel, this study conducted a comparative analysis on characteristics of each type of LED landscape lighting installed inside the expressway tunnel. The study aimed on providing the basic material for effective installation of LED landscape lighting for securing driving stability, reducing fatigue, and lowering the risk of drowsiness.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.681-686
• /
• 2019

This paper proposes a CMOS temperature sensor using inverter delay chains of the same size based on the pulse shrinking method. A temperature-pulse converter (TPC) uses two different temperature delay lines with inverter chains to generate a pulse in proportion to temperature, and a time-digital converter (TDC) shrinks the pulse using inverter chains of the same size to convert pulse width into a digital value to be insensitive to process changes. The chip was implemented with a $0.49{\mu}m{\times}0.23{\mu}m$ area using a $0.35{\mu}m$ CMOS process with a supply voltage of 3.3V. The measurement results show a resolution of $0.24^{\circ}C/bit$ for 9-bit data for a temperature sensor range of $0^{\circ}C$ to $100^{\circ}C$.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.241-246
• /
• 2008

Design of a high-speed railway line requires collaboration of heterogeneous application systems and of engineers with different background. Object-based 3D models with metadata can be a shared information model for the effective collaborative design. In this paper, railway infrastructure information model is proposed to enable integrated and inter-operable works throughout the life-cycle of the railway infrastructures, from planning to maintenance. In order to develop the model, object-based 3-D models were built for a 10km railway among Korea high-speed railway lines. The model has basically three information layers for designers, contractors and an owner, respectively. Prestressed concrete box-girders are the most common superstructure of bridges. The design information layer has metadata on requirements, design codes, geometry, analysis and so on. The construction layer has data on drawings, real data for material and products, schedules and so on. The maintenance layer for the owner has the final geometry, material data, products and their suppliers and so on. These information has its own data architecture which is derived from similar concept of product breakdown structure(PBS) and work breakdown structure(WBS). The constructed RIIM for the infrastructures of the high-speed railway was successfully applied to various areas such as design check, structural analysis, automated estimation, construction simulation, virtual viewing, and digital mock-up. The integrated information model can realize virtual construction system for railway lines and dramatically increase the productivity of the whole engineering process.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.1
• /
• pp.167-174
• /
• 2016

The Korean distribution line currently consists of overhead ground wires (OHGW), overhead distribution lines, neutral wires (NW), and messenger wires (MW). The MW is installed under the NW. The lightning protection system in Korea is focused on OHGW and lightning arrester and the MW are not considered. Therefore, this paper proposes the applicability of MW for purpose of lightning protection. For this, we analyzed the effects of lightning overvoltage according to the existence of OHGW and MW and the grounding conditions of the MW in the Korean distribution system. The grounding conditions of the MW that we took into consideration were the common or separate grounding of the MW and NW. The analysis based on the equivalent circuit of the distribution pole at each condition was performed. The distribution lines and lightning were modeled using the Electromagnetic Transients Program (EMTP). For each of the installation conditions of the OHGW and MW, the various lightning conditions were simulated and analyzed for both direct and indirect lightning. The simulation results showed that, if the OHGW was not installed in the Korean distribution system, the lightning overvoltage could be reduced by the common grounding of the MW and NW.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.12
• /
• pp.1706-1711
• /
• 2013

This paper presents the filter of a resonator comprising a shorted open gap ring(SOGR) and interdigital lines. The proposed filter has the ultra wideband characteristic operating from 3 GHz to 10.5 GHz. In order to achieve the remarkable improvement in the size-reduction of the overall filter structure, only one cell of the SOGR with the inter-digital lines is adopted. It is shown that this filter has the size of $18mm{\times}15mm$ using a metamaterial, the fractional bandwidth over 100%, the insertion loss much less than 1dB, an acceptable return loss performance in the results.