• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(5)
• /
• pp.51-54
• /
• 2000

We are concerned with processing methods of the measurement values of sensors in the control system. When some faults happen to sensor components, the measurement value of sensors cause the malfunction of the plant. So it is necessary to detect and reduce the influence of faults to control with reliability for the overall system. The sensor status must be always good for best demonstration of the controller performance. A self-validating sensor detects the sensor state from the measurement value, reconstruct a soft sensor and can improve reliability of the sensor. If sensor faults, the sensor is detected and reconstructed with the best estimate from its correlation to other sensors and historical data. It is applied to the control of a flexible link system with the sensor fault problems in the light sensor module for position to show the applicability. In this paper, we propose a digital controller which reduces deflection of the moving set-point by reconstructing output of a sensor when the sensor fault is detected.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.499-503
• /
• 1994

The feedback control systems of welding process using visual information can improve weld qualities. However, it is very difficult to get the visual information of weld pool since welding are is much stronger than light from weld pool. To explore the possibility of extending the capability of automatic welding machines a study of a closed loop controlled welding system consisted of a GTA welding machine, a vision system, a stepping motor system and a digital computer was undertaken. Particularly, in this system, a CCD camera with 850nm long pass filter was focused on the weld pool to give a weld pool image. Subsequently, image analysis technique has been developed to measure a weld pool width. Using this weld pool width measurement, a colsed loop control system adjusted welding speed to maintain constant weld pool width.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.132-137
• /
• 2003

For the evaluation of acoustic noise of a DLP projector, vibration and sound characteristics of a DLP projector were studied. The acoustic noise of DLP projector could be classified into three categories, that is, the direct noise from a body of rotation, the air-bone noise generated from turbulence or vortex occurred during cooling process and the structural born noise produced by vibrating elements. Cooling fans and color filter wheel which rotates at 9000 rpm are main causes of acoustic noise induced in DLP projector. Since the structure of an optical module in a DLP projector can be excited by the excessive vibration of a color filter wheel, the structural design for anti-vibration should be considered. To make a reduction of overall acoustic noise, the anti-vibration design and the enclosing structure have been studied and applied to a color filter wheel.

• 한국소음진동공학회논문집
• /
• 제14권9호
• /
• pp.861-867
• /
• 2004

For the evaluation of acoustic noise of a DLP projector, vibration and sound characteristics of a DLP projector were studied. The acoustic noise of DLP projector could be classified into three categories, that is, the direct noise from a body of rotation, the air-bone noise generated from turbulence or vortex occurred during cooling process and the structural born noise produced by vibrating elements. Cooling fans and color filter wheel which rotates at 9000 rpm are main causes of acoustic noise induced in DLP projector. Since the structure of an optical module in a DLP projector can be excited by the excessive vibration of a color filter wheel, the structural design for anti-vibration should be considered. To make a reduction of overall acoustic noise, the anti-vibration design and the enclosing structure have been studied and applied to a color filter wheel.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1118-1120
• /
• 2003

In MSC(Multi-spectral camera ), the incoming light is converted to electronic analog signals by the CCD(charge coupled device) detectors. The analog signals are amplified, biased and converted into digital signals (pixel data stream) in the FPE(Focal plane electronics ). The digital data is transmitted to the PMU for pre-processing to correct for nonuniformity, to partially reorder the pixel stream and to add header data for identification and synchronization In this paper, the video data streams is described in terms of hardware.

• 한국측량학회지
• /
• 제37권5호
• /
• pp.315-322
• /
• 2019

DSM (Digital Surface Model) is a digital representation of ground surface topography or terrain that is widely used for hydrology, slope analysis, and urban planning. Aerial photogrammetry and LiDAR (Light Detection And Ranging) are main technology for urban DSM generation but high-resolution satellite imagery is the only ingredient for remote inaccessible areas. Traditional automated DSM generation method is based on correlation-based methods but recent study shows that a modern pixelwise image matching method, SGM (Semi-Global Matching) can be an alternative. Therefore this study investigated the application of SGM for Kompsat satellite data of KARI (Korea Aerospace Research Institute). Firstly, the sensor modeling was carried out for precise ground-to-image computation, followed by the epipolar image resampling for efficient stereo processing. Secondly, SGM was applied using different parameterizations. The generated DSM was evaluated with a reference DSM generated by the first pulse returns of the LIDAR reference dataset.

• 한국항행학회논문지
• /
• 제20권5호
• /
• pp.496-502
• /
• 2016

본 논문에서는 영상처리를 통해 GUI를 기반으로 산업용 디지털 기기의 측정값을 인식하고 기록하는 시스템을 제안하고 구현하였다. 제안한 시스템은 기존의 차량번호판 인식과 달리 산업용 측정기의 LCD화면에 표시되는 값은 디지털 숫자로 표시하고 있어 소수점과 마이너스 표시, LCD보호유리의 반사광등의 여러 가지 장애요인을 고려하였다. LCD화면에 표시된 숫자를 인식하기 위해 블롭 레이블링 (blob-labeling)기법을 사용하였으며, 인식한 숫자 이미지는 템플릿 매칭(template matching)을 통해 숫자가 무엇인지 판별하여, 인식한 측정값을 측정시간과 함께 저장장치에 기록하였다. 본 논문에서 제안한 시스템은 산업현장에서 제품의 내외경이나 높이를 측정하고 기록할 때 수기로 작성하는 번거로움을 줄이고, 수기로 작성 시 잘못 기입하는 경우를 방지함으로써 생산 공정 과정에서 오류가 없는 효율적인 공정관리가 가능하게 하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1316-1319
• /
• 1996

This paper proposes the algorithm for the correction of a position and orientation of small object such as chip in the precise construction process. In the past, it is general to correct position and orientation of object using human sight and simple vision sensors. But recently, researches using image processing devices have been studied to improve the corrective precision of a position and orientation of object. In this piper, maximum-axis moment and p-theta algorithm are used to correct the position and orientation. Algorithm of maximum-axis moment is widely applied to hetero-object except being applied to a perfect rectangle. This is reason that moments of the X and Y-axis are equal. Therefore, being the shape of a perfect rectangle, the object is applied to other algorithm. In the light of time problem, real-time control is as important as correction of object. To solve it, we use the DSP(Digital Signal Processing) which is far more fast than PC.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2012년도 제45차 동계학술발표논문집 20권1호
• /
• pp.193-195
• /
• 2012

본 논문에서는 구조광 3차원 시스템을 위하여 영상처리를 하여 3차원 정밀도를 높이는 방법을 제안한다. 구조광 기반의 3차원 시스템은 투사된 패턴을 특징점으로 하기 때문에 프로젝터와 카메라 사이에 정확한 대응점을 획득해야만 3차원 복원 신뢰성을 높일 수 있다. 그러나 환경에 따라 정확한 대응점 획득이 어려운 점이 많다. 실제 환경에서 물체들은 물체의 재질과 물체 표면의 색상 등의 이유로 서로 다른 반사율을 가지고 있어 여러 물체들이 혼재 되어 있는 환경에서 각각 물체에 투사된 패턴을 정확히 구별하는 일은 어려운 일이다. 따라서 패턴을 획득한 2차원 영상을 개선하여 패턴을 정확히 구별하여 프로젝터와 카메라 간의 화소 대응점의 정확도를 높여야만 3차원 복원 데이터의 신뢰도를 높일 수 있다. 따라서 본 논문에서는 노이즈 제거 및 다양한 영상처리를 통하여 2차원 영상들에서 패턴을 정확히 구분하도록 하여 화소 대응점의 정확도를 높임으로써 최종적으로 3차원 정밀도를 개선할 수 있는 방법을 제공한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.1320-1325
• /
• 2006

Railway track supports and guides train and it directly affects ride quality and safety. To maintain track quality, regular maintenance activity is essential but it degrades track usage since maintenance activity occupies the track during the work. To achieve maximum track efficiency, track inspection should be performed at commercial running speed. In this paper, we designed and developed high speed rail profile measurement system using laser light sectioning method with line laser generator, digital camera and DSP based image processing system. The measurement system can supports rail profile measurement at the speed of 300 Km/h that can be applied to KTX.