• 한국염색가공학회지
• /
• 제21권1호
• /
• pp.1-9
• /
• 2009

A lot of research has been made over the recent decade to develop testing packages with antimicrobial properties to improve food safety. In this study, a new method, experimental device and technology for environmental corresponding packages of polypropylene (PP) film has been developed to provide effective temperature buffering during the transport/long-term storage of grains or foodstuffs from the supplier to the market. This quantitatively optimized mixing system enabled to produce PP films with the 700$\sim$1,400d (width;1.5$\sim$3mm, thickness;0.01$\sim$0.5mm). In the whole mixing systems, the finely-granulated inorganic illite and PP virgin chip for master batch (M/B) chip was calculated by digital measurement methods, and then the M/B chip for PP film was adapted through a air jet and PP grinding method. The prepared PP film was characterized with tensile strength and elongation, far infrared radiation (FIR) emissivity, antimicrobial activity and deodorization properties. The results revealed that the two differently grain-sized illite could be show homogeneously dispersed on PP chip surface, and as the increasing of illite content, the FIR emissivity and the anion emission rate of film was increasingly improved. In both of 325 and 1,500 mesh-sized illite contained PP chip, of course the antimicrobial activity was good. But the ultimate deodorization rate for ammonia gas of PP film were found to be approximately the same.

• 한국의류학회지
• /
• 제41권4호
• /
• pp.722-740
• /
• 2017

This study was conducted to offer basic data that can be used in a clothing industry for active senior males that are emerging as a new consumer bracket in a rapid aging age. To this end, this study conducted an analysis of 'younger' older male body types based on data from the 6th Size Korea. As a result of the body type analysis of 'younger' older males who are considered active seniors in comparison to 'middle' aged males, the former's height items became shorter compared to 'middle' aged males, but circumference items were bigger. Males aged 35-69, who are 'middle' aged males and 'younger' old males were divided into three body types in this study: Type1- small body type with protruded belly, compared to weight. Type 2- body type of slim torso with wide shoulder-back widths. Type3- big body type overall with tall height and heavy weight. According to body type distribution by age group, the middle-aged males had Type2 body type the most. The younger-old males showed type1 the most. There is a need to reflect the body types of active senior male characteristics in apparel pattern design because the current fits are not appropriate if active senior males wear clothing targeted for males aged 30-50.

• 감성과학
• /
• 제8권3호
• /
• pp.231-240
• /
• 2005

여성의 사회적 참여와 경제적 지위가 높아지면서 소비 주체이자 유행을 선도하는 트렌드 창조자로서 '여성'이 부상하고 있다. 즉, 이제는 '여성'을 제품개발의 한 축으로 인식하고, 여성적 감성을 담아 낼 수 있는 제품 개발과 전략이 필요한 시점이다. 본 연구에서는 최근 디지털 제품을 중심으로 부각되고 있는 '여성성'을 사회$\cdot$문화적$\cdot$경제$\cdot$마케팅적 측면에서 그 배경을 살펴보고, 개발사례를 중심으로 여성적 디자인의 특징을 분석하였다. 또한 실제 제품개발과 연계하여 여성소비자의 소비성향 및 라이프스타일, 선호 제품스타일 등을 분석하였으며, 이를 반영하여 여성층을 겨냥한 감성오디오를 개발하였다. 궁극적으로 여성 지향적 제품개발의 필요성을 제기하고, 여성적 감성을 반영하기 위한 제품디자인 방향에 대하여 연구하였다.

• 대한지리학회지
• /
• 제37권3호
• /
• pp.203-221
• /
• 2002

본 연구의 목적은 사이버스페이스의 공간성을 분석하고 사이버스페이스의 공간적 차별화 현상을 지도화 하려는 것이다. 사이버스페이스의 공간성을 분석하게 위해 선정한 도메인수, 인터넷 기간망, 인터넷 이용자 수의 세 지표간에는 서로 높은 상관성을 띄고 있었다. 사이버스페이스는 공간적으로 매우 차별화 된 분포패턴을 보이고 있으며, 특히 서울의 수위성이 두드러지게 나타나고 있다. 인터넷은 특정 지역들을 선택적으로 연결시키는 동시에 나머지 지역들은 통과하여 접근성을 떨어뜨리면서, 지역간 정보격차를 유발시키고 있었다. 본 연구결과를 통해 디지털 사회가 진전되면서 대두되고 있는 '거리의 소멸 '또는 '지리학의 종말'이라는 주장과는 다르게 사이버스페이스에서도 지리공간은 여전히 중요한 역할을 담당하고 있음을 알 수 있다.

• 복식문화연구
• /
• 제19권5호
• /
• pp.1009-1018
• /
• 2011

The purpose of this study was to develop slacks patterns for middle-aged abdomen-obese adult males by using the 3D virtual-twin and virtual-garment simulation system. The criteria for subjects in this study were males who had over $25kg/m^2$ of BMI, over 90cm of waist, and over 0.90 of WHR. A total of 211 adult males who met these criteria were enrolled. The results were as follows: first, a new slacks pattern considerate of abdomen-obese men was development. The basic numerical formula were as follows: front and back hip girth H/4+3.5, front waist girth W/4+1+0.5, back waist girth W/4+1-0.5, front crotch extension H/16, back crotch extension H/8-0.5, front pleats amount 2.7, and back dart amount 1.5. Second, according to the results of the new slacks patterns appearance evaluation, the new slacks pattern scored more highly than the existing pattern in silhouette and ease amount, confirming that the new slacks pattern is appropriate for the abdomen-obese men. Also, the new slacks pattern was evaluated allowing proper space length of waist, abdomen and hip. Virtual models of production through data from a 3D body scan, pattern draft and virtual garment digital program were applied to a prototypic design method in order to enhance the fitness of ready-made garments. The use of the virtual twin made it impossible to comprehend the appearances and ease correspondent to motions. In order to evaluate wearing fitness, therefore, the system should be improved so as to change arm positions and perform various motions.

• 복식문화연구
• /
• 제25권3호
• /
• pp.285-300
• /
• 2017

This study analyzes the images of models in womenswear advertisements targeting women in their fifties. The goals of this study are: 1) to investigate beauty ideals for middle-aged women by analyzing models' look age, chronological age, wrinkles, gray hair, hair length, body type, and race; and 2) to explore how ageing is dealt with in advertisements by analyzing the range of bodies shown in advertisements, the color mode of photographs, and the clarity of models' figures in relation to models' look ages. A total of 155 printed advertisements from January 2012 to January 2017 from the brands Daks Ladies, Lebeige, Luciano Choi, PAT, and Zishen were selected for analysis. Womenswear brands targeting middle-aged women reinforce cultural ideals of female beauty that emphasize youth and slenderness. They do this by using thin and slender models, who most often appear to be in their twenties and thirties, and have hair longer than their shoulders. Brands with higher price ranges show a preference for Caucasian models, which reveals that a Caucasian identity is associated with sophistication. In addition, the bodies of models who appear to be in their forties and fifties were concealed by framing photographs mostly above the knees. Older models' features were also obscured via the use of black and white photography, strong lighting and contrast, and digital editing that blurred the boundaries between figures and their backgrounds. These decisions for how to represent models could result in negative self-esteem and a denial of the symptoms of ageing among middle-aged women.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.566-568
• /
• 2013

최근 정부의 창조과학의 일환으로 과학교육의 활성화를 위한 정책을 추진하고 있지만 과학전시는 인프라의 부족과 예산 및 인력의 부족으로 많은 어려움을 겪고 있는 현실이다. 과거의 과학관은 현장학습 체험의 대표적인 장소이자 유청소년들의 호기심의 장소였다. 그러나 현대에는 과학관의 경쟁상대는 테마파크나 온라인 게임들이 경쟁의 대상으로 부각되어지면서 체험과 교육이라는 두 가지 목표를 달성하기 위한 과학체험 전시기기의 변화가 요구되어진다. 해외 선진 과학관의 사례를 살펴보면 과학관이 단순한 과학교육 체험의 장이 아닌 하나의 문화공간으로서 휴식과 엔터테인먼트를 제공하고 있으며, 과학이외에도 주변 생활을 다양한 장르의 예술이나 패션 등과 결합하여 전시를 기획하고 있다. 본 연구에서는 현재의 획일화 되어진 전시기기의 설명 패널을 디지로그 북을 이용한 설명 패널로 교체하여 관람객의 연령과 학년에 맞춘 서비스를 제공함으로서 과학지식에 대한 지적 호기심 유발과 관람객의 만족도를 높일 수 있는 방안을 제시 하고자 한다.

• 복식문화연구
• /
• 제23권1호
• /
• pp.126-144
• /
• 2015

The object of this study is to develop textile designs and fashion products based on the cultural resource of Jeju Bangsatop, which means a stone tower preventing misfortune and driving out evil spirits. The field surveys of 32 Bangsatops located at 17 villages in Jeju were conducted. As a result, unlike stone towers located in other regions, Jeju Bangsatops made with basalt. In addition, wood and stone birds, Dolhareungbang, and other sculptures are built on the tops. Jeju Bangsatops were classified into four types based on the body form of the tops: Conical, truncated conical, trapezoid, and irregular shaped Bangsatops. Jeju Bangsatops located in a area or a village are symmetrically arranged in direction of south and north, left and right, east and west, or face to face. The conical, truncated conical, and irregular shaped Jeju Bangsatops which are designated as folk cultural properties or which have the unique sculptures of stone birds and the statues of Dolhareungbang built on the tops were selected as motifs for textile pattern design. The 4 basic patterns of Jeju Bangstops were designed. The six creative textile designs were developed by the various repeat arrangements of the basic patterns and were printed on oxford cotton fabrics by digital textile printing (DTP) method. The sixteen products of wallets, bags, hats and shoes were actually made with the DTP fabrics, the DTP fabrics which were naturally dyed in gray and blue colors, or the DTP fabrics which were redesigned with textile crayon. Therefore, it is confirmed that Jeju Bangsatop could be very useful as a motif for the development of cultural products focusing on Jeju tourism souvenir market.

• 한국컴퓨터정보학회논문지
• /
• 제23권11호
• /
• pp.111-122
• /
• 2018

The purpose of this study was to investigate the bodice prototype method suitable for the upper body shape of old-old aged women using the 3D anthropometric data. And it was to provide the basic data for the upper body garments of old-old aged women. In the overall appearance evaluation, the B pattern was rated as 4.00, and it was evaluated as the most suitable for the bodice prototype of the old-old aged woman. The E pattern was rated lower than normal, and the L pattern and the S pattern were found to be inadequate for older female bodice prototypes. As a result of the measurement of the waist and bust air gap of bodice prototype, the air gap of the bust was not significantly different between the patterns. But the waist air gap showed the largest difference between the L pattern and the S pattern. As a result of evaluating the appearance, the amount of space in the state of 3D simulation, and the air gap, the pattern B appeared to be the most appropriate prototype for the old-old aged women's body shape. However, there is a tendency that the shoulder end point is biased toward the back, so it is necessary to set the inclination of the back shoulder line to be more gentle. Conversely, the front shoulder should be more inclined. In the case of the 3D simulation, the B pattern showed that the other parts generally fit well. In the case of the 3D simulation program used in this study, it was evaluated that it is suitable only for the normal body shape because it is impossible to set the isometric angle which is one of the characteristics of the older female body shape. A study on the bodice prototype suitable for the bent body shape should be carried out through experiments on the actual body shape of various elderly women. In order to cope with the increase of elderly people who are familiar with digital, I think it is necessary to develop an avatar that reflects the old female body shape.

• 생체재료학회지
• /
• 제22권4호
• /
• pp.279-289
• /
• 2018

Background: Cell behavior is the key to tissue regeneration. Given the fact that most of the cells used in tissue engineering are anchorage-dependent, their behavior including adhesion, growth, migration, matrix synthesis, and differentiation is related to the design of the scaffolds. Thus, characterization of the scaffolds is highly required. Micro-computed tomography (micro-CT) provides a powerful platform to analyze, visualize, and explore any portion of interest in the scaffold in a 3D fashion without cutting or destroying it with the benefit of almost no sample preparation need. Main body: This review highlights the relationship between the scaffold microstructure and cell behavior, and provides the basics of the micro-CT method. In this work, we also analyzed the original papers that were published in 2016 through a systematic search to address the need for specific improvements in the methods section of the papers including the amount of provided information from the obtained results. Conclusion: Micro-CT offers a unique microstructural analysis of biomaterials, notwithstanding the associated challenges and limitations. Future studies that will include micro-CT characterization of scaffolds should report the important details of the method, and the derived quantitative and qualitative information can be maximized.