• Textile Coloration and Finishing
• /
• v.21 no.1
• /
• pp.1-9
• /
• 2009

A lot of research has been made over the recent decade to develop testing packages with antimicrobial properties to improve food safety. In this study, a new method, experimental device and technology for environmental corresponding packages of polypropylene (PP) film has been developed to provide effective temperature buffering during the transport/long-term storage of grains or foodstuffs from the supplier to the market. This quantitatively optimized mixing system enabled to produce PP films with the 700$\sim$1,400d (width;1.5$\sim$3mm, thickness;0.01$\sim$0.5mm). In the whole mixing systems, the finely-granulated inorganic illite and PP virgin chip for master batch (M/B) chip was calculated by digital measurement methods, and then the M/B chip for PP film was adapted through a air jet and PP grinding method. The prepared PP film was characterized with tensile strength and elongation, far infrared radiation (FIR) emissivity, antimicrobial activity and deodorization properties. The results revealed that the two differently grain-sized illite could be show homogeneously dispersed on PP chip surface, and as the increasing of illite content, the FIR emissivity and the anion emission rate of film was increasingly improved. In both of 325 and 1,500 mesh-sized illite contained PP chip, of course the antimicrobial activity was good. But the ultimate deodorization rate for ammonia gas of PP film were found to be approximately the same.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.4
• /
• pp.722-740
• /
• 2017

This study was conducted to offer basic data that can be used in a clothing industry for active senior males that are emerging as a new consumer bracket in a rapid aging age. To this end, this study conducted an analysis of 'younger' older male body types based on data from the 6th Size Korea. As a result of the body type analysis of 'younger' older males who are considered active seniors in comparison to 'middle' aged males, the former's height items became shorter compared to 'middle' aged males, but circumference items were bigger. Males aged 35-69, who are 'middle' aged males and 'younger' old males were divided into three body types in this study: Type1- small body type with protruded belly, compared to weight. Type 2- body type of slim torso with wide shoulder-back widths. Type3- big body type overall with tall height and heavy weight. According to body type distribution by age group, the middle-aged males had Type2 body type the most. The younger-old males showed type1 the most. There is a need to reflect the body types of active senior male characteristics in apparel pattern design because the current fits are not appropriate if active senior males wear clothing targeted for males aged 30-50.

• Science of Emotion and Sensibility
• /
• v.8 no.3
• /
• pp.231-240
• /
• 2005

The social participation and economic position of the woman come to be high, they are rising to the market as a core consumer and trend inventor leading the fashion. So that, we have to recognize the woman with one axis of product development, it is necessary to the product development and the strategy which it will put woman oriented sensibility in product design. From this research, it reviews the backgrounds from social culture and the economic marketing sides through the digital product recently, it analyzed the features of woman characteristic designs which is embossed the product. Also it connected actual product development, it developed a woman oriented sensibility audio which reflected a woman's consuming trend, life style and the preference product style. It proposed the necessity of woman oriented product development ultimately and researched the product design strategy for the reflection of woman sensibility.

• Journal of the Korean Geographical Society
• /
• v.37 no.3
• /
• pp.203-221
• /
• 2002

This study attempts to analyze the spatial characteristics of cyberspace and to map spatial variations of cyberspace. In order to analyze the spatial distribution of cyberspace, three measurement indices are selected such as commercial domain number, Internet backbone network, and Internet users, which are highly correlated to each other. The three sets of measurement showed that cyberspace in Korea is spreading in a highly uneven fashion, strongly favoring a few cities and unfavoring economically distressed cities. Seoul acts on overwhelmingly dominant role in cyberspace, by being concentrated a number of domains and having high-capacity bandwidth on Internet backbone network. Internet is selectively connecting several cities into highly interactive networks, while at the same time largely bypassing other cities. The development of Internet network through infrastructure investments at selected cities has resulted in an uneven accessibility and digital divide among cities. The regional disparity would be further reinforced by ICT development as the primary vehicle for unequal accessibility. The result of this study revealed that geography continues to matter, despite the recent rhetoric claiming of 'the death of distance'or 'the end of geography'.

• The Research Journal of the Costume Culture
• /
• v.19 no.5
• /
• pp.1009-1018
• /
• 2011

The purpose of this study was to develop slacks patterns for middle-aged abdomen-obese adult males by using the 3D virtual-twin and virtual-garment simulation system. The criteria for subjects in this study were males who had over $25kg/m^2$ of BMI, over 90cm of waist, and over 0.90 of WHR. A total of 211 adult males who met these criteria were enrolled. The results were as follows: first, a new slacks pattern considerate of abdomen-obese men was development. The basic numerical formula were as follows: front and back hip girth H/4+3.5, front waist girth W/4+1+0.5, back waist girth W/4+1-0.5, front crotch extension H/16, back crotch extension H/8-0.5, front pleats amount 2.7, and back dart amount 1.5. Second, according to the results of the new slacks patterns appearance evaluation, the new slacks pattern scored more highly than the existing pattern in silhouette and ease amount, confirming that the new slacks pattern is appropriate for the abdomen-obese men. Also, the new slacks pattern was evaluated allowing proper space length of waist, abdomen and hip. Virtual models of production through data from a 3D body scan, pattern draft and virtual garment digital program were applied to a prototypic design method in order to enhance the fitness of ready-made garments. The use of the virtual twin made it impossible to comprehend the appearances and ease correspondent to motions. In order to evaluate wearing fitness, therefore, the system should be improved so as to change arm positions and perform various motions.

• The Research Journal of the Costume Culture
• /
• v.25 no.3
• /
• pp.285-300
• /
• 2017

This study analyzes the images of models in womenswear advertisements targeting women in their fifties. The goals of this study are: 1) to investigate beauty ideals for middle-aged women by analyzing models' look age, chronological age, wrinkles, gray hair, hair length, body type, and race; and 2) to explore how ageing is dealt with in advertisements by analyzing the range of bodies shown in advertisements, the color mode of photographs, and the clarity of models' figures in relation to models' look ages. A total of 155 printed advertisements from January 2012 to January 2017 from the brands Daks Ladies, Lebeige, Luciano Choi, PAT, and Zishen were selected for analysis. Womenswear brands targeting middle-aged women reinforce cultural ideals of female beauty that emphasize youth and slenderness. They do this by using thin and slender models, who most often appear to be in their twenties and thirties, and have hair longer than their shoulders. Brands with higher price ranges show a preference for Caucasian models, which reveals that a Caucasian identity is associated with sophistication. In addition, the bodies of models who appear to be in their forties and fifties were concealed by framing photographs mostly above the knees. Older models' features were also obscured via the use of black and white photography, strong lighting and contrast, and digital editing that blurred the boundaries between figures and their backgrounds. These decisions for how to represent models could result in negative self-esteem and a denial of the symptoms of ageing among middle-aged women.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.566-568
• /
• 2013

Recently, the government as part of the creation of science for science education policies promoting the activation of the Science Museum. However the lack of infrastructure, budget and human resources are a reality that a lot of difficulties. In past, A field trip of Science Museum was a place of curiosity of youth. However, modern Science Museum has to competition with the online games and theme park in order to achieve the two goals of scientific experience and education, which it needs change display device is required. Looking at the cases of advanced foreign Science Museum is not merely a head of science education experience as a cultural space, provide relaxation and entertainment, and life science area in addition to a variety of genres such as art and fashion exhibits are planning to combine. In this study, the current uniform description panel of exhibition device described in the written text replaced with the digilog book with the age and grade of the visitors by providing a tailored service for scientific knowledge and intellectual curiosity induced measures can claim the satisfaction of visitors is proposed.

• The Research Journal of the Costume Culture
• /
• v.23 no.1
• /
• pp.126-144
• /
• 2015

The object of this study is to develop textile designs and fashion products based on the cultural resource of Jeju Bangsatop, which means a stone tower preventing misfortune and driving out evil spirits. The field surveys of 32 Bangsatops located at 17 villages in Jeju were conducted. As a result, unlike stone towers located in other regions, Jeju Bangsatops made with basalt. In addition, wood and stone birds, Dolhareungbang, and other sculptures are built on the tops. Jeju Bangsatops were classified into four types based on the body form of the tops: Conical, truncated conical, trapezoid, and irregular shaped Bangsatops. Jeju Bangsatops located in a area or a village are symmetrically arranged in direction of south and north, left and right, east and west, or face to face. The conical, truncated conical, and irregular shaped Jeju Bangsatops which are designated as folk cultural properties or which have the unique sculptures of stone birds and the statues of Dolhareungbang built on the tops were selected as motifs for textile pattern design. The 4 basic patterns of Jeju Bangstops were designed. The six creative textile designs were developed by the various repeat arrangements of the basic patterns and were printed on oxford cotton fabrics by digital textile printing (DTP) method. The sixteen products of wallets, bags, hats and shoes were actually made with the DTP fabrics, the DTP fabrics which were naturally dyed in gray and blue colors, or the DTP fabrics which were redesigned with textile crayon. Therefore, it is confirmed that Jeju Bangsatop could be very useful as a motif for the development of cultural products focusing on Jeju tourism souvenir market.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.11
• /
• pp.111-122
• /
• 2018

The purpose of this study was to investigate the bodice prototype method suitable for the upper body shape of old-old aged women using the 3D anthropometric data. And it was to provide the basic data for the upper body garments of old-old aged women. In the overall appearance evaluation, the B pattern was rated as 4.00, and it was evaluated as the most suitable for the bodice prototype of the old-old aged woman. The E pattern was rated lower than normal, and the L pattern and the S pattern were found to be inadequate for older female bodice prototypes. As a result of the measurement of the waist and bust air gap of bodice prototype, the air gap of the bust was not significantly different between the patterns. But the waist air gap showed the largest difference between the L pattern and the S pattern. As a result of evaluating the appearance, the amount of space in the state of 3D simulation, and the air gap, the pattern B appeared to be the most appropriate prototype for the old-old aged women's body shape. However, there is a tendency that the shoulder end point is biased toward the back, so it is necessary to set the inclination of the back shoulder line to be more gentle. Conversely, the front shoulder should be more inclined. In the case of the 3D simulation, the B pattern showed that the other parts generally fit well. In the case of the 3D simulation program used in this study, it was evaluated that it is suitable only for the normal body shape because it is impossible to set the isometric angle which is one of the characteristics of the older female body shape. A study on the bodice prototype suitable for the bent body shape should be carried out through experiments on the actual body shape of various elderly women. In order to cope with the increase of elderly people who are familiar with digital, I think it is necessary to develop an avatar that reflects the old female body shape.

• Biomaterials Research
• /
• v.22 no.4
• /
• pp.279-289
• /
• 2018

Background: Cell behavior is the key to tissue regeneration. Given the fact that most of the cells used in tissue engineering are anchorage-dependent, their behavior including adhesion, growth, migration, matrix synthesis, and differentiation is related to the design of the scaffolds. Thus, characterization of the scaffolds is highly required. Micro-computed tomography (micro-CT) provides a powerful platform to analyze, visualize, and explore any portion of interest in the scaffold in a 3D fashion without cutting or destroying it with the benefit of almost no sample preparation need. Main body: This review highlights the relationship between the scaffold microstructure and cell behavior, and provides the basics of the micro-CT method. In this work, we also analyzed the original papers that were published in 2016 through a systematic search to address the need for specific improvements in the methods section of the papers including the amount of provided information from the obtained results. Conclusion: Micro-CT offers a unique microstructural analysis of biomaterials, notwithstanding the associated challenges and limitations. Future studies that will include micro-CT characterization of scaffolds should report the important details of the method, and the derived quantitative and qualitative information can be maximized.