• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.203-211
• /
• 1998

A traditional method to produce three dimensional orthophoto map has been studied by digital photogrammetry which decides a height by digitally searching conjugate points on the stereo image. Many researches in digital photogrammetric field are still in progress to determine conjugate points automatically. In this study, we analyze the effect of accuracy of area-based image matching with changing eight types of target area size using four types of image pyramid. The result of image matching to each method compared with 1/5,000 digital mapping data. We decided a optimal size of target area on a percentage of image matching. Digital elevation model is generated by matching results and bundle method. As a result, three dimensional orthophoto map is made in terms of digital elevation model and orthophoto.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.204-208
• /
• 2006

This study is to develop a distributed urban flood runoff model that simulates the road runoff and to test the applicability of the model by applying to Pyeongtaek city of $12.2km^2$. To generate the runoff along the runoff, agree burned DEM (Digital Elevation Model) with road networks was suggested and the proper spatial resolution of DEM was identified finer than 15 m. To test the model applicability, 32 points on the road networks were selected and the hydrographs of each point were generated. The test showed reasonable results that increase the road runoff from the high elevation roads to the low elevation roads and the road runoff considering rainwater drainage from the road also showed reasonable results.

• Korean Journal of Remote Sensing
• /
• v.24 no.2
• /
• pp.179-188
• /
• 2008

This study aims for generating a city spatial model required for the creation of a 3D noise map. In this study, we propose an efficient method to generate 3D models of the terrain and buildings using only a digital map and draft maps previously established without using any sensory data. The terrain model is generated by interpolating into a grid the elevation values derived from both the contour lines and the elevation point of the digital map. Building model is generated by combining the 2D building boundaries and the building elevations extracted from the digital map and the draft map, respectively. This method has been then applied to a digital map and three sets of draft maps created in the different times. covering the entire area of Yeongdeungpo-gu. The generated city spatial model has been successfully utilized for the noise analysis and the 3D visualization of the analysis results.

• Aerospace Engineering and Technology
• /
• v.11 no.1
• /
• pp.118-125
• /
• 2012

The purpose of this study is to analyze the ortho image quality change according to the generation technique of Digital Elevation Model(DEM) based on the digital map. First of all, two different types of DEM were generated using contour layer(Case1), contour layer and altitude layer(Case2) from the digital map on the scale of 1/5,000. After generating and evaluating two types of DEM, KOMPSAT-2 ortho images were generated by using them. In conclusion, Case2 DEM was more effective to use in the slope and switchback area, on the other hand, Case1 DEM was much better than Case2 DEM for preventing a topographic distortion in flat area.

• The Journal of the Korea Contents Association
• /
• v.7 no.3
• /
• pp.168-175
• /
• 2007

The flood caused landslide disaster each year because of climate change. And the change of topography from an earthquake makes topographical analysis impossible. This paper performed an investigation about a utilization methods and generation DEM(Digital Elevation Model) after digital aerial photographs quickly when the topographical change happens. Stereo imagery that was collected through digital aerial photographs made a generation of DEM possible. A standard deviation of generated DEM is 0.864m which is somewhat high but shows the real topography. As a result, it should be possible to generate DEM by using aerial photographs in case of the change of topography.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.142-142
• /
• 2021

An arbitrary representation of an urban drainage sewer system was devised using a geographic information system (GIS) tool in order to calculate the surface and subsurface flow interaction for simulating urban flood. The proposed methodology is a mean to supplement the unavailability of systematized drainage system using high-resolution digital elevation(DEM) data in under-developed countries. A modified DEM was also developed to represent the flood propagation through buildings and road system from digital surface models (DSM) and barely visible streams in digital terrain models (DTM). The manhole, sewer pipe and storm drain parameters are obtained through field validation and followed the guidelines from the Plumbing law of the Philippines. The flow discharge from surface to the devised sewer pipes through the storm drains are calculated. The resulting flood simulation using the modified DEM was validated using the observed flood inundation during a rainfall event. The proposed methodology for constructing a hypothetical drainage system allows parameter adjustments such as size, elevation, location, slope, etc. which permits the flood depth prediction for variable factors the Plumbing law. The research can therefore be employed to simulate urban flood forecasts that can be utilized from traffic advisories to early warning procedures during extreme rainfall events.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.4
• /
• pp.157-169
• /
• 2010

In this study, the applicability of SRTM(The Shuttle Radar Topography Mission) DEM(Digital Elevation Model) which is one of the remotely sensed shuttle's radar digital elevation was tested for use as the input data in a grid-based rainfall-runoff model. The SRTM DEM and digital topographic map derived DEM(TOPO DEM) were building with 500m spatial resolution for the Chungju-Dam watershed which located in the middle east of South Korea, and stream-burning method was applied to delineate the proper flow direction for model application. Similar topographical characteristics were shown as a result of comparing elevation, flow-direction, hydrological slope, number of watershed cell, and profile between SRTM DEM and TOPO DEM. Two DEMs were tested by using a grid-based rainfall-runoff model named KIMSTORM with 6 storm events. The results also showed no significant differences in average values of relative error for both peak runoff(0.91 %) and total runoff volume(0.29 %). The results showed that the SRTM DEM has applicability like TOPO DEM for use in a grid-based rainfall-runoff modeling.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.533-540
• /
• 2006

In recent years, civil-engineering work is desired the terrain information to be more efficient in earthwork volume calculation. One method for collecting elevation data is LiDAR. Lidar data was used to produce rapidly an accurate digital elevation model of the terrain, compared with the conventional ground surveys, photogrammetty, and remote sensing. Raw Lidar data is combined with GPS positional data to georeference the data sets. Lidar data is edited and processed to generate surface models, elevation models, and contours. Here we can either create a Tin Volume Surface or a Gird Volume Surface. Triangulated Irregular Network(TIN) has complex data structure, but it can describe well terrain surface features. As we have seen, we search the efficiency for earthwork volume calculation using Lidar data. One conclusion we can draw from this study is that Lidar data is more accurate result than digital map in the calculation of earthwork volume.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.292-296
• /
• 2002

This study has been accomplished as a experimental study for field application of 3D Perspective Image Map creation using Digital Topographical Map and based on the Ortho-Projection Image which is generated from Satellite Overlay Images and the precise Relative Coordinates of longitude, latitude and altitude which is corrected by GCP(Ground Control Point). AS to Contour Lines Map which is created by Coordinate conversion of 1:5,000 Topographical Map, we firstly made Satellite Image Map to substitute for Digital Topographical Map through overlapping the original images on top of each Ortho-Projection Image created and checking the accuracy. In addition to 3D Image Map creation for 3D Terrain analysis of a target district, Slope Gradient Analysis, Aspect Analysis and Terrain Elevation Model generation, multidirectional 3D Image generation by DEM can be carried out through this study. This study is to develop a mapping technology with which we can generate 3D Satellite Images of a target district through the composition of Digital Maps and Facility Blueprint and arbitrarily create 3D Perspective Images of the target district from any view point.

• Journal of Korea Water Resources Association
• /
• v.36 no.5
• /
• pp.799-810
• /
• 2003

Hydrologic models generally require land surface analysis to different topographic parameters defined as direct or indirect input variables to the model. Specially GIS supply the these parameters from digital data set of land surface The sensitivity analysis to DEM(Digital Elevation Model) resolution and the threshold area are of GIS extracted digital data set applied GIUH(Geomorphological Instantaneous Unit Hydrograph)model is investigated. Also it is compared the responses of GIUH model as input data of stream networks from digital data set(blue line) of NGIS and those extracted from DEM of various grid sizes. The results shows that the GIUH model is significantly affected by the DEM resolution and threshold area. According to the results, DEM grid size is suitable from 25m to 50m. Also threshold area is in the range of 30%∼50% for exceedance probability.