• Spatial Information Research
• /
• v.13 no.1 s.32
• /
• pp.55-63
• /
• 2005

Direct Georeferencing(DG) Is based on the direct measurement of the projection centers and rotation angle of sensor through loading the GPS and INS in aircraft. The methods can offer us to acquire the exterior orientation parameters with only minimum GCPs, even the ground control process could be completely skipped. Hence, as long as securing Digital Elevation Model (DEM), it is feasible to generate digital orthophotos without performing the aerial triangulation with Ground Control Point (GCP) surveying. In this study, the DEM is automatically generated by using a image matching technique based on aerial photos and exterior orientation parameters. This is followed by producing an orthophoto from these results. Finally, accuracy analysis of the georeferencing technique for generating orthoimage indicates that RMS errors of 62cm and 76cm occurred at the X and the Y axis, respectively. This means that the results fulfill the demanding accuracy of the 1:5000 digital map. Hence, it is possible to conclude from this study that the direct georeferencing based orthoimage generation method is able to effectively digital map update.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.1
• /
• pp.64-72
• /
• 2009

The method to generate a digital elevation model(DEM) from contour lines causes a problem in which the low relief landform cannot be clearly presented due to the fact that it is significantly influenced by the expression of micro landform elements according to the interval of contours. Thus, this study attempts to develop a landcover burning method that recovers the micro relief landform of the DEM, which applies buffering and map algebra methods by inputting the elevation information to the landcover. In the recovering process of the micro landform, the DEM was recovered using the buffering method and elevation information through the map algebra for the landcover element for the micro landform among the primary DEM generation, making landcover map, and landcover elements. The recovering of the micro landform was applied based on stream landforms. The recovering of landforms using the buffering method was performed for the bar, which is a polygonal element, and wetland according to the properties of concave/convex through generating contours with a uniform interval in which the elevation information applied to the recovered landform. In the case of the linear elements, such as bank, road, waterway, and tributary, the landform can be recovered by using the elevation information through applying a map algebra function. Because the polygonal elements, such as stream channel, river terrace, and artificial objects (farmlands) are determined as a flat property, these are recovered by inputting constant elevation values. The results of this study were compared and analyzed for the degree of landform expression between the original DEM and the recovered DEM. In the results of the analysis, the DEM produced by using the conventional method showed few expressions in micro landform elements. The method developed in this study well described wetland, bar, landform around rivers, farmland, bank, river terrace, and artificial objects. It can be expected that the results of this study contribute to the classification and analysis of micro landforms, plain and the ecology and environment study that requires the recovering of micro landforms around streams and rivers.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.2
• /
• pp.153-158
• /
• 2006

A new High Resolution Geometry or HRG imaging instrument is developed by CNES to be carried on-board SPOT 5. The HRG instrument offers a higher ground resolution than that of the HRV/HRVIR on SPOT 1 - 4 satellites. The field width of HRG is 60 km, same as SPOT constellation. With two HRG instruments, a maximum swath of 120 km at 5 m resolution can be achieved. The generation of Digital Elevation Models (DEMs) from satellite stereo images scores over conventional methods of DEM generation using topographic maps and aerial photographs. This global availability of satellite images allows for quicker data processing for an equivalent area. In this study, a HRG stereo images of SPOT 5 over JECHEON has been used with Leica Photogrammetry Suite OrthoBASE Pro tool for the creation of a digital elevation model (DEM). The extracted DEM was compared to the reference DEM obtained from the contours of digital topographic map.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.7
• /
• pp.3-12
• /
• 2004

The need to predict the rate of soil erosion, both under existing conditions and those expected to occur following soil conservation practice, has been led to the development of various models. In this study Morgan model especially developed for field-sized areas on hill slopes was applied to assess the rate of soil erosion using RS/GIS environment in the Dukchun river basin, one of two tributaries flowing into Jinyang lake. In order to run the model, land cover mapping was made by the supervised classification method with Landsat TM satellite image data, the digital soil map was generated from scanning and screen digitizing from the hard copy of soil maps, digital elevation map (DEM) in order to generate the slope map was made by the digital map (DM) produced by National Geographic Information Institute (NGII). Almost all model parameters were generated to the multiple raster data layers, and the map calculation was made by the raster based GIS software, IL WIS which was developed by ITC, the Netherlands. Model results show that the annual soil loss rates are 5.2, 18.4, 30.3, 58.2 and 60.2 ton/ha/year in forest, paddy fields, built-up area, bare soil, and upland fields respectively. The estimated rates seemed to be high under the normal climatic conditions because of exaggerated land slopes due to DEM generation using 100 m contour interval. However, the results were worthwhile to estimate soil loss in hilly areas and the more precise result could be expected when the more accurate slope data is available.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.51 no.4
• /
• pp.15-20
• /
• 2009

The purpose of this study was to test the applicability of the HSPEXP model performance criteria for calibrating hydrologic parameters of HSPF. Baran watershed, located at Whasung city, was selected as a study watershed in this study. Input data for the HSPF model were obtained from the digital elevation map, landuse map, soil map and others. Water flow data from 1996 to 2000 was used for calibration and from 2002 to 2007 was for validation. Using the HSPEXP decision-support software, hydrology parameters were adjusted based on total volume, then low flows, storm flows, and finally seasonal flows. Suggested criteria for each model performance variables were referenced from the previous research. For the calibration period, all the HSPEXP model performance criteria were satisfied while two criteria were slightly violated for the validation period.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.381-384
• /
• 2004

The goal of this study is to generate a landslide susceptibility map using GIS(geographic information system) based method. A simple and efficient algorithm is proposed to generate a landslide susceptibility map from DEM(digital elevation model) and existing maps. The categories of controlling factors for landslides, aspect of slope, soil, topographical index, landuse, vegetation are defined, because those factors are said to have relevance to landslide and are easy to obtain theirs sources. The weight value for landslide susceptibility is calculated from the density of the area of landslide blocks in each class. Finally, a map of susceptibility zones is produced using the weight value of all controlling factors, and then each susceptibility zone is evaluated by comparing with the distribution of each controlling factor class.

• Journal of Industrial Technology
• /
• v.18
• /
• pp.35-41
• /
• 1998

A watershed terrain factor is known to the very important in studies of a stream and a watershed. We have obtained the terrain factor in map directly or we have generated it in a digitalized map. In this study, DTED(Digital Terrain Elevation Data) offering in DMA(Defense Mapping Agency) was used to create a stream and a watershed and to extract the terrain factor. As comparison of the factors gererated in digitalized map the terrain factors extracted in DTED, DTED could be used to extract a terrain factor for a watershed management.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.4
• /
• pp.33-43
• /
• 2011

This study is to make snowfall distribution map for the 4 heavy snowfall events of January 2001, March of 2004, December of 2005 and January of 2010, and compare the results for three cases of construction methods. The cases are to generate the map by applying IDW(Inverse Distance Weighting) interpolation to 76 ground measured snowfall point data (Snow Depth Map; SDM), mask out the SDM with the MODIS snow cover area (MODIS SCA) of Terra MODIS (MODerate resolution Imaging Spectroradiometer) (SDM+MODIS SCA; SDM_M), and consider the snowdepth lapse rate of snowfall by elevation (Digital Elevation Model; DEM) to the second case (SDM_M+DEM; SDM_MD). By applying the MODIS SCA, the SCA of 4 events was 62.9%, 44.1%, 52.0%, and 69.0% for the area of South Korea. For the average snow depth, the SDM_M decreased 0.9cm, 1.9cm, 0.8cm, and 1.5cm compared to SDM and the SDM_MD increased 1.3cm, 0.9cm, 0.4cm, and 1.2cm respectively.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.13 no.1
• /
• pp.35-40
• /
• 2011

While high-definition precipitation maps with a 270 m spatial resolution are available for South Korea, there is little information on geospatial availability of precipitation water for the famine - plagued North Korea. The restricted data access and sparse observations prohibit application of the widely used PRISM (Parameter-elevation Regressions on Independent Slopes Model) to North Korea for fine-resolution mapping of precipitation. A hybrid method which complements the PRISM grid with a sub-grid scale elevation function is suggested to estimate precipitation for remote areas with little data such as North Korea. The fine scale elevation - precipitation regressions for four sloping aspects were derived from 546 observation points in South Korea. A 'virtual' elevation surface at a 270 m grid spacing was generated by inverse distance weighed averaging of the station elevations of 78 KMA (Korea Meteorological Administration) synoptic stations. A 'real' elevation surface made up from both 78 synoptic and 468 automated weather stations (AWS) was also generated and subtracted from the virtual surface to get elevation difference at each point. The same procedure was done for monthly precipitation to get the precipitation difference at each point. A regression analysis was applied to derive the aspect - specific coefficient of precipitation change with a unit increase in elevation. The elevation difference between 'virtual' and 'real' surface was calculated for each 270m grid points across North Korea and the regression coefficients were applied to obtain the precipitation corrections for the PRISM grid. The correction terms are now added to the PRISM generated low resolution (~2.4 km) precipitation map to produce the 270 m high resolution map compatible with those available for South Korea. According to the final product, the spatial average precipitation for entire territory of North Korea is 1,196 mm for a climatological normal year (1971-2000) with standard deviation of 298 mm.

• Proceedings of the Korea Contents Association Conference
• /
• 2005.11a
• /
• pp.335-339
• /
• 2005

Digital elevation models(DEM) were generated from SPOT-5 HRG supermode imagery through photogrammetric processing. The reference DEMs were obtained from digital topographic maps of 1/5000 scaleas for analyzing the accuracy of the generated DEMs. The DEMs extracted from HRG stereo image data were compared with digital topograpic map DEMs on several test sections. And digital surface models(DSM) and 3D building model was produced.